Mechanical Response and Failure Mechanisms of Block Caving Bottom Structures Under Dynamic Conditions Induced by Slope Rockfalls
Source abstract
Abstract
The stability of bottom structures in block caving mines is significantly challenged by impact loads generated from large rockfalls and ore collapses on slopes. This study aims to investigate the mechanical response and failure characteristics of bottom structures under such dynamic and cyclic loading conditions. Discrete element methods (DEMs) were employed to simulate the impact load amplitudes caused by large rockfalls on bottom structures. Specimens with identical mechanical properties to the bottom structure were fabricated at a 1:100 scale, based on the principle of similarity ratio tests. Three distinct types of impact loads were identified and analyzed: overall impact from large-scale slope collapses, localized impact from partial rock and soil mass collapses, and continuous multiple impacts from progressive slope failures. True triaxial tests were conducted to evaluate the mechanical response of the bottom structure under these loading scenarios. The results indicate that while overall and multiple impact loads from slope collapses do not lead to catastrophic failure of the bottom structure, severe damage occurs under a 100 m thickness of ore and large block impacts. Specifically, the inner walls of ore accumulation troughs peel off, and ore pillars between troughs fracture and fail. This study highlights the need for advanced experimental and numerical approaches to accurately predict the stability and failure modes of bottom structures under complex loading conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Landslides and related hazards · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Yunnan Diqing Non-Ferrous Metals Co., Ltd., Shangri-La 674400, China
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
Funding
National Natural Science Foundation of China · Hunan Provincial Natural Science Foundation of China · Yunnan Province Science and Technology Plan Project · Hunan provincial key research and development Program
References (33)
Show source-provided references
1. Brown, E.T. (2007). Block Caving Geomechanics, The University of Queensland.
2. Rock mass characterization and assessment of block-forming geological discontinuities during caving of primary copper ore at the El Teniente mine, Chile10.1016/j.ijrmms.2006.09.010 ↗
3. Characteristics of rockburst and its mining technology in mines10.1007/s11771-002-0038-7 ↗
4. Dorador, L., Eberhardt, E., and Elmo, D. (2015). Influence of Block Strength and Veining on Secondary Fragmentation Related to Block Caving, International Society of Offshore and Polar Engineers.
5. Numerical Analysis of Block Caving-Induced Instability in Large Open Pit Slopes: A Finite Element/Discrete Element Approach10.1007/s00603-009-0035-3 ↗
6. Fatigue-thermal damage characteristics of red sandstone with a hole under high-temperature cyclic loading coupling and microstructural degradation10.1016/j.jmrt.2024.10.044 ↗
7. Fracture characteristics and damage mechanisms of heat-treated sandstone with combined hole-joint flaws under uniaxial compression10.1016/j.tafmec.2025.104845 ↗
8. Fatigue response and AE characteristics of soft and hard composite rock containing coplanar double joints10.1016/j.ijfatigue.2025.108994 ↗
9. A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite10.1016/S1365-1609(99)00106-9 ↗
10. A Novel Dynamic Fractional Mechanical Model for Rock Fracture Under True Triaxial Static-Dynamic Combined Loading and its Engineering Application10.1007/s00603-024-04036-9 ↗
11. Numerical simulation of frost heaving deformation of fractured rocks considering heat-force coupling10.1016/j.tafmec.2025.104921 ↗
12. A Novel Mogi Type True Triaxial Testing Apparatus and Its Use to Obtain Complete Stress–Strain Curves of Hard Rocks10.1007/s00603-015-0875-y ↗
13. Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions10.1016/j.ijrmms.2009.09.003 ↗
14. Forecasting vulnerability of deep extraction level excavations to draw-induced cave loads10.1016/j.jrmge.2018.07.006 ↗
15. Fragmentation model integrated in a gravity flow simulator for block caving planning10.1007/s10035-024-01396-5 ↗
16. Flow characteristics of caved ore and rock under the influence of multiple coarse particles: Insight from interparticle interaction10.1007/s10035-024-01458-8 ↗
17. Study on the influence of 3D pre-existing joint on rockfall fragmentation during impact based on discrete element method10.1016/j.compgeo.2025.107270 ↗
18. Gravity flow characterization of fine granular material for Block Caving10.1016/j.ijrmms.2018.12.011 ↗
19. Experimental quantification of vertical stresses during gravity flow in block caving10.1016/j.ijrmms.2020.104237 ↗
20. Fatigue damage variable and evolution of rock subjected to cyclic loading10.1016/j.ijrmms.2009.11.003 ↗
21. A fast method to find smooth economic envelopes for block and panel caving mines10.1016/j.resourpol.2023.103703 ↗
22. Linear energy storage and dissipation laws and damage evolution characteristics of rock under triaxial cyclic compression with different confining pressures10.1016/S1003-6326(23)66251-X ↗
23. Size effect of concrete based on split Hopkinson pressure bar (SHPB) test10.1016/j.conbuildmat.2024.137499 ↗
24. Numerical modeling of influence parameters in cavabililty of rock mass in block caving mines10.1016/j.ijrmms.2018.03.001 ↗
25. New method and application of disturbance range prediction for caving method of metal ore10.1016/S1003-6326(23)66153-9 ↗
26. Experimental and technological research on grouting and curing of surface moraine collapse pits in block caving mining10.1016/j.engfailanal.2025.109574 ↗
27. Integration of field characterisation, mine production and InSAR monitoring data to constrain and calibrate 3-D numerical modelling of block caving-induced subsidence10.1016/j.ijrmms.2012.05.008 ↗
28. Evaluating wet muck risk in block caving mines: A new model10.1016/j.ijrmms.2023.105485 ↗
29. DEM modeling of one-dimensional compression of sands incorporating statistical particle fragmentation scheme10.1139/cgj-2020-0308 ↗
30. A hybrid extraction level layout design for block caving10.1080/25726668.2021.1992980 ↗
31. Combined early warning method for rockburst in a Deep Island, fully mechanized caving face10.1007/s12517-016-2776-0 ↗
32. In-situ stress measurements and stress change monitoring to monitor overburden caving behaviour and hydraulic fracture pre-conditioning10.1016/j.ijmst.2015.11.017 ↗
33. Numerical modelling of rock mass bulking and geometric dilation using a bonded block modelling approach to assist in support design for deep mining pillars10.1016/j.ijrmms.2022.105145 ↗