Quantitative Analysis of the Influence of Volatile Matter Content in Coal Samples on the Fractal Dimension of Their Nanopore Characteristics
Source abstract
Abstract
As a crucial energy source and chemical raw material, coal’s micro-pore structure holds a pivotal influence on the occurrence and development of coalbed methane (CBM). This study systematically analyzed the nano-pore structure, surface roughness, and fractal characteristics of six coal samples with varying volatile matter content (Vdaf) using Atomic Force Microscopy (AFM) combined with Scanning Electron Microscopy (SEM), revealing the correlation between volatile matter and the micro-physical properties of coal. Through AFM three-dimensional topographical observations, it was found that coal samples with higher volatile matter exhibited significant gorge-like undulations on their surfaces, with pores predominantly being irregular macropores, whereas low volatile matter coal samples had smoother surfaces with dense and regular pores. Additionally, the surface roughness parameters (Ra, Rq) of coal positively correlated with volatile matter content. Meanwhile, quantitative analysis of nano-pore parameters using Gwyddion software showed that an increase in volatile matter led to a decline in pore count, shape factor, and area porosity, while the average pore diameter increased. The fractal dimension of samples with different volatile matter contents was calculated, revealing a decrease in fractal dimension with rising volatile matter. Nano-ring analysis indicated that the total number of nano-rings was significantly higher in low volatile matter coal samples compared to high volatile matter ones, but the nano-ring roughness (Rr) increased with volatile matter content. SEM images further validated the AFM results. Through multi-scale characterization and quantitative analysis, this study clarified the extent to which volatile matter affects the nano-pore structure and surface properties of coal, providing critical data support for efficient CBM development and reservoir evaluation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Coal Properties and Utilization · Hydrocarbon exploration and reservoir analysis · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Resources and Geosciences, China University of Mining and Technology, Xuzhou 221116, China
College of Civil Engineering, Anhui Jianzhu University, Hefei 230601, China
The Third Exploration Team of Anhui Provincial Coalfield Geology Bureau, Suzhou 234000, China
Funding
Scientific and Technological Innovation Project of the Third Exploration Team of the Anhui Provincial Coalfield Geology Bureau
References (49)
Show source-provided references
1. Coal macromolecular structural characteristic and its influence on coalbed methane adsorption10.1016/j.fuel.2018.03.015 ↗
2. Effect of pore characteristics on coalbed methane adsorption in middle-high rank coals10.1007/s10450-016-9811-z ↗
3. Effect of microstructures on methane adsorption characteristics of soft and hard coal
4. A comparison of experimental methods for describing shale pore features—A case study in the Bohai Bay Basin of eastern China10.1016/j.coal.2015.10.009 ↗
5. Micromechanical characteristics and controlling mechanism of deep shale: A case study of well JYA in Pingqiao block, Fuling area
6. Micromechanical characteristics of marine/continental shale based on indentation test
7. Observations and morphological analysis of supermolecular structure of natural bitumens by atomic force microscopy10.1016/j.fuel.2007.04.005 ↗
8. Application of sparry grain limestone petrographic analysis combining image processing and deep learning
9. Burgo, T.A.L., Pereira, G.K.R., Iglesias, B.A., Moreira, K.S., and Valandro, L.F. (2022). AFM advanced modes for dental and biomedical applications. J. Mech. Behav. Biomed. Mater., 136.10.1016/j.jmbbm.2022.105475 ↗
10. Flechsig, H., and Ando, T. (2023). Protein dynamics by the combination of high-speed AFM and computational modeling. Curr. Opin. Struct. Biol., 80.10.1016/j.sbi.2023.102591 ↗
11. Gas cluster etching for the universal preparation of polymer composites for nano chemical and mechanical analysis with AFM10.1016/j.apsusc.2022.153954 ↗
12. AFM monitoring of the cut surface of a segmented polyurethane unveils a microtome-engraving induced growth process of oriented hard domains10.1016/j.polymertesting.2023.107961 ↗
13. Nanoscale physical parameters of source rocks identified by atomic force microscopy: A review10.1002/gj.4548 ↗
14. Nanoscale quantitative characterization of microstructure evolution of partly graphitized high rank coal: Evidence from AFM and HRTEM10.1016/j.fuel.2022.124802 ↗
15. Morphological characterization of super fine pulverized coal particle. Part 2. AFM investigation of single coal particle10.1016/j.fuel.2010.07.001 ↗
16. Microstructure and nanomechanical characterization of tectonic coal based on SEM, AFM, XRD and DSI10.1016/j.surfin.2024.104158 ↗
17. An atomic force microscopy study of coal nanopore structure10.1007/s11434-011-4623-8 ↗
18. Influences of magmatic intrusion on the macromolecular and pore structures of coal: Evidences from Raman spectroscopy and atomic force microscopy10.1016/j.fuel.2013.11.012 ↗
19. A new application of atomic force microscopy in the characterization of pore structure and pore contribution in shale gas reservoirs10.1016/j.jngse.2021.103802 ↗
20. Quantitative analysis of coal nanopore characteristics using atomic force microscopy10.1016/j.powtec.2019.02.027 ↗
21. Atomic force microscope10.1103/PhysRevLett.56.930 ↗
22. Dynamic atomic force microscopy methods10.1016/S0167-5729(02)00077-8 ↗
23. Tapping mode atomic force microscopy in liquids10.1063/1.111795 ↗
24. Preparation of a coal surface for contact angle measurements10.1163/156856197X00219 ↗
25. Surface roughness prediction based on cutting parameters and tool vibrations in turning operations10.1016/S0924-0136(01)00959-1 ↗
26. Morphological operations, planar mathematical formulations, and stereological interpretations for automated image analysis of concrete microstructure10.1016/j.cemconcomp.2004.07.008 ↗
27. The effect of pore structure and gas pressure upon the transport properties of coal: A laboratory and modeling study. 1. Isotherms and pore volume distributions10.1016/S0016-2361(99)00055-1 ↗
28. Fractal characterization of adsorption-pores of coals from North China: An investigation on CH4 adsorption capacity of coals10.1016/j.coal.2007.07.003 ↗
29. Pore structure characterization of coal by synchrotron small-angle X-ray scattering and transmission electron microscopy10.1021/ef500487d ↗
30. Laboratory measurement and modeling of coal permeability with continued methane production: Part 1–Laboratory results10.1016/j.fuel.2011.10.052 ↗
31. Multifractal analysis of coal pore structure based on NMR experiment: A new method for predicting T2 cutoff value10.1016/j.fuel.2020.119338 ↗
32. Pore structure characterization of North American shale gas reservoirs using USANS/SANS, gas adsorption, and mercury intrusion10.1016/j.fuel.2012.06.119 ↗
33. Nano-asperity contact analysis and surface optimization for magnetic head slider/disk contact10.1016/S0043-1648(95)06902-X ↗
34. Application of PeakForce tapping mode of atomic force microscope to characterize nanomechanical properties of organic matter of the Bakken Shale10.1016/j.fuel.2018.06.021 ↗
35. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
36. Gwyddion: An open-source software for SPM data analysis10.2478/s11534-011-0096-2 ↗
37. Fractal character of cold-deposited silver films determined by low-temperature scanning tunneling microscopy10.1103/PhysRevB.51.11022 ↗
38. The dependence of fractal dimension on measuring conditions of scanning probe microscopy10.1007/s002160051466 ↗
39. Quantitative characterization of individual particle surfaces by fractal analysis of scanning electron microscope images10.1007/BF00321787 ↗
40. Influence of tip geometry on fractal analysis of atomic force microscopy images10.1007/s003390051262 ↗
41. Macromolecular and pore structures of Chinese tectonically deformed coal studied by atomic force microscopy10.1016/j.fuel.2014.08.039 ↗
42. Quantitative study on coal and shale pore structure and surface roughness based on atomic force microscopy and image processing10.1016/j.fuel.2019.02.001 ↗
43. Multi-scale fractal characterizations of lignite, subbituminous and high-volatile bituminous coals pores by mercury intrusion porosimetry10.1016/j.jngse.2017.04.021 ↗
44. Morphology, genesis, and distribution of nanometer-scale pores in siliceous mudstones of the Mississippian Barnett Shale10.2110/jsr.2009.092 ↗
45. Microstructural investigation of gas shales in two and three dimensions using nanometer-scale resolution imaging10.1306/08151110188 ↗
46. Changes of semifusinite and fusinite surface roughness during heat treatment determined by atomic force microscopy10.1016/j.coal.2011.10.009 ↗
47. Pore structures and fractal characteristics ofliquid nitrogen adsorption pores in lignite in the Hailar Basin
48. The experimental study on the fractal characteristies of coal adsorbed porein Fukang mining district of Xinjiang
49. Study on the fractal feature of coal pore structure with different ranks and its influencing factors in Xishan coal field