Design Optimization of Cleaning Fan Blades for Rice Combine Harvesters: An Experimental and CFD Simulation Study
Source abstract
Abstract
Recent advancements in rice breeding have significantly increased production in China. However, high-yielding varieties require strong airflow for effective cleaning. Longitudinal-flow rice combine harvesters equipped with a centrifugal fan with four blades are widely used in China; however, these fans exhibit fluctuating cleaning performance and airflow maldistribution. To address these limitations, this study developed an innovative multi-blade cleaning fan design by incorporating the blade clocking effect, a concept not previously applied in centrifugal fans. To support the design process, the required airflow rates and reduction in static pressure were first analyzed. Based on these findings and fundamental fan design theory, three fan models were designed with blade clocking angles of 0°, 5.5°, and 10.5°, respectively. Three fan models were evaluated through computational fluid dynamics (CFD) simulations using a design of experiments approach based on Box–Behnken design response surface methodology to identify the optimal fan. The fan features a 10.5° clocking angle, meeting the airflow requirements for effective cleaning. In the test bench measurements, the setup with guide plate angles No. 1 and No. 2 at 32° and a fan speed of 1200 rpm was identified as optimal. The newly designed multi-blade cleaning fan overcomes the limitations of conventional four-blade designs, significantly enhancing airflow uniformity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rice Cultivation and Yield Improvement · Agricultural Engineering and Mechanization · Cyclone Separators and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China
Funding
Sponsored by National Natural Science Foundation of China · Young Talents Cultivation Program of Jiangsu University, China · Agricultural Science and Technology Support Program of Taizhou, China · Priority Academic Program Development of Jiangsu Higher Education Institutions
References (38)
Show source-provided references
1. Liang, Z.W., Li, Y.M., and Xu, L.Z. (2019). Grain sieve loss fuzzy control system in rice combine harvesters. Appl. Sci., 9.10.3390/app9010114 ↗
2. Nie, L., and Peng, S. (2017). Rice production worldwide (Chapter Two: Rice production in China). Rice Production Worldwide, Springer International Publishing.10.1007/978-3-319-47516-5_2 ↗
3. Impacts of climate change on self-sufficiency of rice in China: A CGE model-based evidence with alternative regional feedback mechanisms10.1016/j.jclepro.2019.05.075 ↗
4. Ministry of Agriculture and Rural Affairs of the People’s Republic of China (MoAPRC) (2020). Report on Digital Development in Rural China.
5. Progress in super-hybrid rice breeding10.1016/j.cj.2017.02.001 ↗
6. Qian, P., He, Q., Tang, Z., and Gu, T. (2025). Biomimetic Structural Design for Reducing the Adhesion Between Wet Rice Leaves and Metal Surfaces. Agriculture, 15.10.3390/agriculture15090921 ↗
7. Development of a variable-diameter threshing drum for rice combine harvester using MBD–DEM coupling simulation10.1016/j.compag.2022.106859 ↗
8. Optimization and simulation research of the airway of tangential-axial combine harvester cleaning room
9. Fei, T., Jiming, S., Zhuoer, W., and Qiang, P. (2022, January 4–6). Development and application of intelligent agricultural machinery: A review. Proceedings of the 7th International Conference on Big Data Analytics (ICBDA), Guangzhou, China.
10. Post-processing methods to eliminate erroneous grain yield measurements: Review and directions for future development10.1007/s11119-013-9336-3 ↗
11. Design of longitudinal-flow threshing and separating unit of corn combine harvester
12. Jing, J., Sun, H., Liang, R., Chen, S., Tang, Z., He, X., and Chen, Y. (2025). Noise Testing of the Conveyor Trough Sprocket and Surface Noise Reduction Performance Evaluation of the Cavity Structure in a Combine Harvester. Agriculture, 15.10.3390/agriculture15121299 ↗
13. Development of a hydraulic variable-diameter threshing drum control system for combine harvester, part I: Adaptive monitoring method10.1016/j.biosystemseng.2025.01.001 ↗
14. Que, K.X., Tang, Z., Wang, T., Su, Z., and Ding, Z. (2024). Effects of unbalanced incentives on threshing drum stability during rice threshing. Agriculture, 14.10.3390/agriculture14050777 ↗
15. Threshing cylinder unbalance detection using a signal extraction method based on parameter-adaptive variational mode decomposition10.1016/j.biosystemseng.2024.05.010 ↗
16. Que, K., Zhuang, X., Shi, Y., Ding, Z., Tang, Z., Jing, T., Cao, Y., Wang, B., and Yu, Y. (2024). Winding Characteristics and Signal Characterization of Roller During Threshing of Mature Rice. Agriculture, 14.10.3390/agriculture14122332 ↗
17. Wang, F.Z., Liu, Y.B., and Ji, K.Z. (2023). Research and experiment on a variable-diameter threshing drum with movable radial plates for a combine harvester. Agriculture, 13.10.3390/agriculture13081487 ↗
18. BP neural network model for material distribution prediction based on variable amplitude anti-blocking screening DEM simulations
19. Modal vibration response of rice combine harvester frame under multi-source excitation10.1016/j.biosystemseng.2020.04.002 ↗
20. Evaluation of headland turning types of adjacent parallel paths for combine harvesters10.1016/j.biosystemseng.2023.07.009 ↗
21. Development of a cleaning fan for rice combine harvester using computational fluid dynamics and response surface methodology to optimize outlet airflow distribution10.1016/j.biosystemseng.2019.12.016 ↗
22. Development of cleaning systems for combine harvesters: A review10.1016/j.biosystemseng.2023.10.018 ↗
23. Effect of airflow field in the tangential-longitudinal flow threshing and cleaning system on harvesting performance10.1155/2020/4121595 ↗
24. Optimization of a multi-duct cleaning system for rice combine harvesters utilizing CFD and experiments10.1016/j.biosystemseng.2019.11.016 ↗
25. Experiment of double-outlet multi-duct cleaning operation in wheat combine harvester
26. Zhang, T., Li, Y.M., and You, G.L. (2023). Experimental study on the cleaning performance of a hot air flow cleaning device. Agriculture, 13.10.3390/agriculture13091828 ↗
27. Jonckheere, M.R.M. (1997). Cleaning Means in an Agricultural Harvesting Machine. (No. 5,624,315), U.S. Patent.
28. Shape optimization of forward-curved-blade centrifugal fan with Navier–Stokes analysis10.1115/1.1792256 ↗
29. Effect of a cross-flow opening on the performance of a centrifugal fan in a combine harvester10.1016/j.biosystemseng.2009.11.003 ↗
30. Effect of volute design and blade number on the performance of centrifugal fans
31. Jiang, C.F. (2017). Study of Blade Profile in Backward Centrifugal Fan Based on the 3-D Numerical Simulation. [Master’s Thesis, Zhejiang Science Technology University].
32. Airflow Resistance of seeds at different bulk densities using Ergun’s equation10.13031/2013.18487 ↗
33. Research on basic characteristics of grain-fluidized bed
34. Performance characteristics and internal flow patterns in a reverse-running pump–turbine10.1177/0954406211416304 ↗
35. MIP (1999). Design Manual of a Fan, Mechanical Industry Press.
36. Calculations of three-dimensional viscous flow in a multi-blade centrifugal fan by modeling blade forces. Proceedings of the Institution of Mechanical Engineers- Part A10.1243/095765003322066510 ↗
37. FLUENT, Inc (2006). FLUENT 6.3 User’s Guide, FLUENT, Inc.
38. ASAE Standards (2003). Reporting of Uniformity Trials (S452.2 FEB03), ASAE.