OntoIMM: An Ontology for Product Intelligent Master Model
Source abstract
Abstract
Information organizing principle is one of the key issues of intelligent master model (IMM), which is an enhancement of the master model (MM) based on KBE (knowledge-based engineering). Despite the fact that the core product model (CPM) has been confirmed to be an organizing mechanism for product master model, the key issue of supporting the information organizing for IMM is not yet well addressed, mainly due to the following two reasons; (1) lack of representation of complete information and knowledge with regard to product and process, including the know-why, know-how, and know-what information and knowledge, and (2) lack of semantic richness. Therefore, a multiaspect extension to CPM was first defined, and then an ontology was constructed to represent the information and design knowledge. The extension refers to adding a design process model, context model, product control structure model, and design rationale model to CPM concerning the enhancement of master model, which is to comprehensively represent the reason, process, and result information and knowledge of the product. The ontology construction refers to representing the concepts, relationships among these concepts and consistency rules of IMM information structure. Finally, an example of barrel design and analysis process is illustrated to verify the effectiveness of proposed method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Industrial Technology and Control Systems · Semantic Web and Ontologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
School of Mechanical & Manufacturing Engineering, National University of Sciences and Technology, Islamabad 44000, Pakistan
China Ordnance Industry No.208 Research Institute, Beijing 102202, China
Funding
the National Defense Basic Scientific Research Project of china
References (54)
Show source-provided references
1. Fenves, S.J. (2002). A Core Product Model for Representing Design Information.10.6028/NIST.IR.6736 ↗
2. Knowledge-intensive support for product design with an ontology-based approach10.1007/s00170-009-2296-0 ↗
3. A feature-based approach towards an integrated product model in intelligent design10.1007/s00170-013-4991-0 ↗
4. Design engineering—A need to rethink the solution using knowledge based engineering10.1016/S0950-7051(99)00013-1 ↗
5. Fenves, S.J., Foufou, S., Bock, C., Bouillon, N., and Sriram, R.D. (2005). CPM2: A Revised Core Product Model for Representing Design Information.10.6028/NIST.IR.7185 ↗
6. CAD and the Product Master Model10.1016/S0010-4485(98)00047-5 ↗
7. Rohl, P.J., Kolonay, R.M., Irani, R.K., Sobolewski, M., Kao, K., and Bailey, M.W. (2000, January 6–8). A Federated Intelligent Product EnviRonment. Proceedings of the 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, USA. AIAA-2000-4902.10.2514/6.2000-4902 ↗
8. Bailey, M.W., and Verduin, W.H. (2000, January 14−16). FIPER: An intelligent system for the optimal design of highly engineered products. Measuring the Performance and Intelligence of Systems. Proceedings of the 2000 NIST Performance Metrics for Intelligent Systems Workshop, Gaithersburg, MD, USA.
9. Cedar, R., Forrester, J., and Yokoyama, K. (September, January 29). Integrated aircraft engine design-the implementation of the master model concept at GE aircraft engines. Proceedings of the 24th International congress of the aeronautical sciences, Yokohama, Japan.
10. Fenves, S.J., Choi, Y., Gurumoorthy, B., Mocko, G., and Sriram, R. (2003). Master Product Model for the Support of Tighter Design-Analysis Integration.10.6028/NIST.IR.7004 ↗
11. Design and Engineering Process Integration through a Multiple View Intermediate Modeler in a Distributed Object-oriented System Environment10.1016/S0010-4485(97)00096-1 ↗
12. Zha, X.F., Fenves, S.J., and Sriram, R.D. (, January 24–28). A Feature-Based Approach to Embedded System Hardware and Software Co-Design. Proceedings of the 2005 ASME Design Engineering Technical Conference, Long Beach, CA, USA.10.1115/DETC2005-85582 ↗
13. Information Models for Product Representation: Core and Assembly Models10.1504/IJPD.2005.007248 ↗
14. OntoSTEP: Enriching product model data using ontologies10.1016/j.cad.2012.01.008 ↗
15. The Development of the Engineering Support Environment by the Web Master Model: The Web Master Model of Analysis Information and 3-Dimensional Model
16. Rasmussen, C.C., Canfield, R.A., and Blair, M. (September, January 30). Optimization Process for Configuration of Flexible Joined-Wing. Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, USA. AIAA Paper 2004–4330.10.2514/6.2004-4330 ↗
17. A knowledge-based master-model approach with application to rotating machinery design10.1177/1063293X11424511 ↗
18. A New Product Development Methodology Based On Product Master Model
19. A CAD-CAE Integration Approach Using Feature-based Multi-resolution and Multi-abstraction Modeling Techniques10.1016/j.cad.2004.09.021 ↗
20. Development of a master model concept for DEMO vacuum vessel10.1016/j.fusengdes.2016.06.009 ↗
21. KBE-based stamping process paths generated for automobile panels10.1007/s00170-005-0239-y ↗
22. Enabling Distributed Multi-disciplinary Design of Complex Products: A Knowledge based Engineering Approach
23. Tyapin, I., Sandberg, M., Kokkolaras, M., Lundbladh, A., and Isaksson, O. (2012, January 11–15). Jet Engine Design Optimization Using a Knowledge-Based Master Model. Proceedings of the ASME Turbo Expo, Copenhagen, Denmark.10.1115/GT2012-69309 ↗
24. Sandberg, M., Kokkolaras, M., Aidanpää, J.O., Isaksson, O., and Larsson, T. (2009, January 1–5). A master-model approach to whole jet engine analysis and design optimization. Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal.
25. A knowledge-based master model approach exemplified with jet engine structural design10.1016/j.compind.2016.12.003 ↗
26. Fenves, S.J., Foufou, S., Bock, C., and Sriram, R.D. (2008). CPM2: A core model for product data. J. Inf. Sci. Eng., 14501–14507.10.1115/1.2830842 ↗
27. Ontology-Based Exchange of Product Data Semantics10.1109/TASE.2005.849087 ↗
28. A model for capturing product assembly information10.1115/1.2164451 ↗
29. Baysal, M.M., Roy, U., Sudarsan, R., Sriram, R.D., and Lyons, K.W. (October, January 28). The Open Assembly Model for the Exchange of Assembly and Tolerance Information: Overview and Example. Proceedings of the 2004 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference DETC2004/CIE’04, Salt Lake City, UT, USA.10.1115/DETC2004-57727 ↗
30. Rachuri, S., Han, Y.H., Feng, S.C., Roy, U., Wang, F.J., Sriram, R.D., and Lyons, K.W. (2003, January 10–11). Object-Oriented Representation of Electro Mechanical Assemblies Using UML. Proceedings of the 5th IEEE International Symposium on Assembly and Task planning, Besancon, France.10.6028/NIST.IR.7057 ↗
31. Wang, F.J., Fenves, S.J., Sudarsan, R., and Sriram, R.D. (2003, January 2–6). Towards modeling the evolution of product families. Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, USA.10.1115/DETC2003/CIE-48216 ↗
32. A semantic product modeling framework and its application to behavior evaluation10.1109/TASE.2011.2165210 ↗
33. Representation of Heterogeneous Material Properties in the Core Product Model10.1007/s00366-007-0065-y ↗
34. A Model for the Flow of Design Information in Product Development10.1007/s003660070004 ↗
35. Shooter, S.B., Keirouz, W.T., Szykman, S., and Fenves, S.J. (2000, January 10–13). A Moodel for Information Flow in Design. Proceedings of the ASME International Design Engineering Technical Conferences (DETC2000), Baltimore, MD, USA.10.1115/DETC2000/DTM-14550 ↗
36. Towards Computer-Aided Conceptual Design of Mechatronic Devices with Multiple Interaction-States
37. Xuan, F.Z., and Sriram, R.D. (2004, January 11). Feature-based component model for design of embedded system. Proceedings of the SPIE 5605, Intelligent Systems in Design and Manufacturing, Bellingham, WA, USA.
38. Knowledge Engineering: Principles and Methods10.1016/S0169-023X(97)00056-6 ↗
39. Towards principles for the design of ontologies used for knowledge sharing10.1006/ijhc.1995.1081 ↗
40. Development of a product configuration system with an ontology-based approach10.1016/j.cad.2008.05.004 ↗
41. Li, X., Martínez, J.F., and Rubio, G. (2017). Towards a Hybrid Approach to Context Reasoning for Underwater Robots. Appl. Sci., 7.10.3390/app7020183 ↗
42. ONTO-PDM: Product-driven ONTOlogy for Product Data Management interoperability within manufacturing process environment10.1016/j.aei.2011.12.002 ↗
43. Vegetti, M., Henning, G.P., and Leone, H.P. (2005, January 14–18). PRoduct ONTOlogy. An ontology for complex product modeling domain. Proceedings of the 4th Mercosur Congress on Process Systems Engineering, Rio de Janeiro, Brazil.
44. Using Explicit Ontologies in KBS Development10.1006/ijhc.1996.0090 ↗
45. Mappings Domains to Methods in Support of Reuse10.1006/ijhc.1994.1066 ↗
46. A Translation Approach to Portable Ontology Specifications10.1006/knac.1993.1008 ↗
47. Studer, R., Eriksson, H., Gennari, J.H., Tu, S.W., Fensel, D., and Musen, M.A. (1996, January 9–14). Ontologies and the Configuration of Problem-Solving Methods. Proceedings of the 10th Knowledge Acquisition for Knowledge-based Systems Workshop (KAW-96), Banff, AB, Canada.
48. Wang, H.H., Noy, N., Rector, A., Musen, M., Redmond, T., Tudorache, T., Drummond, N., and Horridge, M. (2006, January 23–26). Frames and OWL Side by Side. Proceedings of the 9th International Protégé Conference, Stanford University, Stanford, CA, USA.
49. Decision based design: A contemporary paradigm for ship design
50. Lewis, K.E., Chen, W., and Schmidt, L.C. (2006). Decision Making in Engineering Design, ASME Press.10.1115/1.802469 ↗
51. Ontology-based executable design decision template representation and reuse
52. Integrating reasoning and clinical archetypes using OWL ontologies and SWRL rules10.1016/j.jbi.2010.11.005 ↗
53. Resolving schematic discrepancy in the integration of entity-relationship schemas
54. Stanford University (2017, July 15). Protégé 3.5 Release. Available online: http://protegewiki.stanford.edu/wiki/ Protege_3.5_Release_Notes.