Experimental Investigation on the Influence of a Double-Walled Confined Width on the Velocity Field of a Submerged Waterjet
Source abstract
Abstract
The current research on confined submerged waterjets mainly focuses on the flow field of the impinging jet and wall jet. The double-sided wall vertically confined waterjet, which is widely used in many fields such as mining, cleaning and surface strengthening, has rarely been studied so far. In order to explore the influence of a double-sided wall confined width on the velocity field of submerged waterjet, an experiment was conducted with the application of 2D particle image velocimetry (PIV) technology. The distribution of mean velocity and turbulent velocity in both horizontal and vertical planes was used to characterize the flow field under various confined widths. The results show that the vertical confinement has an obvious effect on the decay rate of the mean centerline velocity. When the confined width changes from 15 to 5, the velocity is reduced by 20%. In addition, with the decrease of the confined width, the jet has a tendency to spread horizontally. The vertically confined region induces a space hysteresis effect which changes the location of the transition region moving downstream. There are local negative pressure zones separating the fluid and the wall. This study of a double-walled confined jet provides some valuable information with respect to its mechanism and industrial application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrology and Sediment Transport Processes · Erosion and Abrasive Machining · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China
Hubei Key Laboratory of Waterjet Theory and New Technology, Wuhan University, Wuhan 430072, China
College of Power Engineering, Chongqing University, Chongqing 400044, China
Funding
the National Key Basic Research Program of China · the National Natural Science Foundation of China
References (39)
Show source-provided references
1. Experimental research on a waterjet to simulate erosion by impact of a water drop10.1016/j.wear.2016.09.006 ↗
2. A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method10.1016/j.jmatprotec.2007.10.024 ↗
3. Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA10.1016/j.eswa.2011.01.019 ↗
4. Influence of waterjet peening and smoothing on the material surface and properties of stainless steel 30410.1016/j.surfcoat.2014.07.013 ↗
5. Rock breaking performance of a pick assisted by high-pressure water jet under different configuration models10.3901/CJME.2015.0305.023 ↗
6. Cleaning of complex soil layers on vertical walls by fixed and moving impinging liquid jets10.1016/j.jfoodeng.2015.12.021 ↗
7. Effects of nozzle inner surface roughness on the cavitation erosion characteristics of high speed submerged jets10.1016/j.expthermflusci.2016.01.009 ↗
8. Effects of area discontinuity at nozzle inlet on the characteristics of self-resonating cavitating waterjet10.3901/CJME.2016.0426.060 ↗
9. An experimental and numerical study of water jet cleaning process10.1016/j.jmatprotec.2010.11.017 ↗
10. Mechanism and experimental investigation of ultrahigh pressure water jet on rubber cutting
11. Jet flow characteristics of sinusoidal wavy nozzles10.1007/s12206-012-0898-1 ↗
12. Experimental study on the effects of feeding pipe diameter on the cavitation erosion performance of self-resonating cavitating waterjet10.1016/j.expthermflusci.2016.11.029 ↗
13. An experimental study of circular sand-water wall jets10.1016/j.ijmultiphaseflow.2015.04.003 ↗
14. Chemical processing and micromixing in confined impinging jets10.1002/aic.690490905 ↗
15. TR-PIV measurement and POD analysis of the plane wall jet subjected to lateral perturbation10.1016/j.expthermflusci.2016.04.001 ↗
16. A study of free jet impingement10.1017/S0022112071000053 ↗
17. Direct numerical simulation of particle-laden plane turbulent wall jet and the influence of Stokes number10.1016/j.ijmultiphaseflow.2017.03.003 ↗
18. Non-dimensionalization and mixing quantification of laminar twin semi-confined jets10.1016/j.ijheatfluidflow.2014.03.007 ↗
19. Vortical structures and heat transfer in a round impinging jet10.1017/S002211200700955X ↗
20. Tani, I., and Komatsu, Y. (1964). Impingement of a round jet on a flat surface. Applied Mechanics, Proceedings of the 11th International Congress of Applied Mechanics Munich, Springer.
21. The influence of nozzle diameter on the circular hydraulic jump of liquid jet impingement10.1016/j.expthermflusci.2015.10.033 ↗
22. Investigation of the flow field in a three dimensional confined impinging jets reactor by means of microPIV and DNS10.1016/j.cej.2010.09.046 ↗
23. Experimental heat transfer study on impinging, turbulent, near-critical water jets confined by an annular wall10.1016/j.supflu.2013.03.002 ↗
24. Experimental study on the vortex and entrainment characteristics for a round transverse jet in shallow water10.1016/S1001-6058(08)60161-4 ↗
25. Adane, K.F.K., and Tachie, M.F. (2010). Experimental and numerical study of laminar round jet flows along a wall. J. Fluids Eng.-Trans. ASME, 132.10.1115/1.4002653 ↗
26. On the spreading mechanism of the three-dimensional turbulent wall jet10.1017/S0022112001003846 ↗
27. Shinneeb, M. (2006). Confinement Effects in Shallow Water Jets. [Ph.D. Thesis, University of Saskatchewan].
28. Coherent structures in shallow water jets10.1115/1.4003194 ↗
29. Confinement effects in shallow water jets10.1061/(ASCE)HY.1943-7900.0000306 ↗
30. Effects of indenter angle on micro-scale fracture toughness measurement by pillar splitting10.1111/jace.15093 ↗
31. Determination of the elastic moduli and residual stresses of freestanding Au-TiW bilayer thin films by nanoindentation10.1016/j.matdes.2016.06.003 ↗
32. Heat transfer and flow characteristics of a rectangular channel with a small circular cylinder having slit-vent vortex generator10.1016/j.ijthermalsci.2016.01.006 ↗
33. Heat transfer distribution and shadowgraph study for impinging underexpanded jets10.1016/j.applthermaleng.2016.12.046 ↗
34. Slotting radius prediction model of soft coal seams with high-pressure pulse water jet
35. Experimental evaluation of the physical properties required of abrasives for optimizing waterjet cutting of ductile materials
36. Mechanisms of damage initiation in a titanium alloy subjected to water droplet impact during ultra-high pressure plain waterjet erosion10.1016/j.jmatprotec.2012.04.013 ↗
37. Cutting meat with bone using an ultrahigh pressure abrasive waterjet10.1016/j.meatsci.2008.11.010 ↗
38. A strategy for efficient and quality cutting of materials with abrasive waterjets considering the variation in orifice and focusing nozzle diameter10.1016/j.ijmachtools.2005.01.020 ↗
39. An analysis of noise in PIV images10.1007/BF03182515 ↗