journal article·2018-04-09Open access

Design and Optimization of an Opened Suspended Core Fiber-Based SPR Sensor with Gold Cylinder Structures

Wentan Jiao, Jinrong Liu, Jing Zhang, Guanjun Wang, Mengxing Huang

Applied Sciences· Volume 8· Issue 4

Abstract

In this study, an opened three-hole suspended core fiber surface plasmon resonance sensor structure based on the combination of photonic crystal fiber and surface plasmon resonance (SPR) mechanism was proposed and analyzed. One hole in the clad layer was exposed to the outside, and a lay of gold cylinders with the same size and gap was placed along the inside of the opened hole. The existence of the gold cylinders could stimulate the SPR effect and selecting the suitable gaps between the cylinders could enhance the SPR effect and increase its sensitivity. Then COMSOL software was used to simulate how the cylinder diameter, the gaps between the cylinders, and the fluid refractive index variation affect the sensor’s transmission loss spectrum, field enhancement effect, and the sensitivity. The optimized results show that the sensitivity of this proposed SPR sensor could be high, up to 1 × 10−5 RIU/nm, and it was much higher than the sensitivity of the existing photonic crystal fiber SPR sensor (1 × 10−4 RIU/nm), which was an order of magnitude improvement. This study could provide a reliable theoretical basis for future research and design of real-time and high-sensitivity opened fiber SPR sensors.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Plasmonic and Surface Plasmon Research · Advanced Fiber Optic Sensors · Photonic and Optical Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Electrical Engineering and Automation, Luoyang Institute of Science and Technology, Luoyang 471023, China

School of Information and Communication Engineering, North University of China, Taiyuan 030051, China

School of Electronic and Information Engineering, Beihang University, Beijing 100083, China

Collage of Information Science & Technology, Hainan University, Haikou 570228, China

Funding

NSFC · national Key R&D programs

References (23)

Show source-provided references
1. Enhancement of fluorescence-based sensing using microstructured optical fibres10.1364/OE.15.017891 ↗
2. Design and modeling of photonic crystal fiber gas sensor10.1364/AO.42.003509 ↗
3. Photonic crystal fiber based evanescent-wave sensor for detection of biomolecules in aqueous solutions10.1364/OL.29.001974 ↗
4. Opening up optical fibers10.1364/OE.15.011843 ↗
5. Microstructured Polymer Optical Fibers Compared to Conventional POF: Novel Properties and Applications10.1109/JSEN.2010.2041056 ↗
6. Exposed-core microstructured optical fibers for real-time fluorescence sensing10.1364/OE.17.018533 ↗
7. Biased liquid crystal infiltrated photonic bandgap fiber10.1364/OE.17.004442 ↗
8. Side-Opened Suspended Core Fiber-Based Surface Plasmon Resonance Sensor10.1109/JSEN.2014.2382612 ↗
9. Wang, G., Liu, J., Zheng, Z., Yi, Y., Xiao, J., and Bian, Y. (2011, January 9–13). Suspended core fiber integrated microfluidic chip for surface plasmon resonance enhanced biosensing. Proceedings of the 2011 IEEE Photonics Conference (PHO), Arlington, VA, USA.10.1109/PHO.2011.6110752 ↗
10. Surface Plasmon Resonance-Based Fiber and Planar Waveguide Sensors10.1155/2009/645162 ↗
11. Wang, G., Liu, J., Zheng, Z., Xiao, J., and Zhang, J. (2011, January 15–19). A fast response tilted fiber Bragg grating fluid refractometer using an exposed-hole microstructured optical fiber. Proceedings of the 21st International Conference on Optical Fiber Sensors, Ottawa, ON, Canada.10.1117/12.884936 ↗
12. Han, Y., Oo, M.K., Sukhishvili, S., and Du, H. (2010, January 13–15). Photonic Crystal Fiber as an Optofluidic Platform for Surface-Enhanced Raman Scattering. Proceedings of the 2nd Workshop on Specialty Optical Fibers and Their Applications (WSOF-2), Oaxaca, Mexico.10.1117/12.869331 ↗
13. Note: Simultaneous measurement of surface plasmon resonance and surface-enhanced Raman scattering10.1063/1.3321313 ↗
14. Liscidini, M., Galli, M., Patrini, M., Dacarro, G., Bajoni, D., Loo, R.W., Goh, M.C., Shi, M., and Sipe, J.E. (2010, January 23–28). Enhancement of light-matter interaction using surface states in photonic crystal structures. Proceedings of the Quantum Sensing and Nanophotonic Devices VII, San Francisco, CA, USA.10.1117/12.836233 ↗
15. Surface-plasmon-resonance sensor based on three-hole microstructured optical fiber10.1364/OE.16.008427 ↗
16. Guan, C., and Yuan, L. (2011, January 15–19). Surface plasmon resonance refractive index fibersensor with holeassisted structure. Proceedings of the 21st International Conference on Optical Fiber Sensors, Ottawa, ON, Canada.10.1117/12.884915 ↗
17. Weber, M.J. (2003). Hand Book of Optical Materials, CRC Press LLC.
18. Optical constants of the noble metals10.1103/PhysRevB.6.4370 ↗
19. Design criteria for microstructured-optical-fiber-based surface-plasmon-resonance sensors10.1364/JOSAB.24.001423 ↗
20. Design of the microstructured optical fiber-based surface plasmon resonance sensors with enhanced microfluidics10.1364/OE.14.011616 ↗
21. Microstructured optical fibers as high-pressure micro fluidic reactors10.1126/science.1124281 ↗
22. A review of IR transmitting, hollow waveguides10.1080/01468030050058794 ↗
23. Patterning the Tips of Optical Fibers with Metallic Nanostructures Using Nanoskiving10.1021/nl103730g ↗