journal article·2020-04-04Open access

Seismic Retrofitting of Traditional Masonry with Pultruded FRP Profiles

Francesca Sciarretta

Applied Sciences· Volume 10· Issue 7

Abstract

This paper presents a study on the potentiality of seismic retrofitting solutions with pultruded Fiber Reinforced Polymer (FRP) profiles. This material can be used in connected frames providing lightweight, corrosion-free and reversible retrofitting of masonry buildings with the moderate requirements of surface preservation. In a hypothetical case study, an experimental program was designed; monotonic shear tests on a half-size physical model of the sample wall were performed to assess the structural performance before and after retrofitting with a basic frame of pultruded Glass Fiber Reinforced Polymer (GFRP) C-shaped profiles, connected to the masonry by steel threaded bar connections. During the tests, the drift, the diagonal displacements in the masonry and the micro-strain in the profiles were measured. The retrofitted system has proven very effective in delaying crack appearance, increasing the maximum load (+85% to +93%) and ultimate displacement (up to +303%). The failure mode switches from rocking to a combination of diagonal cracking and bed joint sliding. The gauge recordings show a very limited mechanical exploitation of the GFRP material, despite the noticeable effectiveness of the retrofit. The application seems thus promising and worth a deeper research focus. Finally, a finite element modelling approach has been developed and validated, and it will be useful to envisage the effects of the proposed solution in future research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Architecture, Design and Art, Università IUAV di Venezia, Venice 30123, Italy

References (35)

Show source-provided references
1. Dubină, D. (2015). Seismic retrofitting of existing structures using steel-based solutions. Minutes of International Workshop Organised within the Framework of FRS2-CT-2014-00022 STEELEARTH, Timişoara, Romȃnia, 23th November 2015, Politehnica University of Timisoara.
2. Sugano, S. (1996, January 23–28). State-of-the-art in techniques for rehabilitation of buildings. Proceedings of the 11th WCEE—World Conference on Earthquake Engineering, Acapulco, Mexico. Paper No. 2175.
3. Buonocore, G., Gesualdo, A., Monaco, M., and Savino, M.T. (2014, January 2–5). Improvement of Seismic Performance of Unreinforced Masonry Buildings using Steel Frames. Proceedings of the 12th International Conference on Computational Structures Technology, Naples, Italy.
4. Seismic strengthening of unreinforced masonry piers with steel elements10.1193/1.1585913 ↗
5. Strengthening of masonry structures using steel frames10.14419/ijet.v2i1.581 ↗
6. (2020, February 03). Lorenzo Jurina—Torre San Dalmazio a Pavia. Available online: http://jurina.it/1992/01/01/torre-san-dalmazio-a-pavia.
7. (2020, February 03). Consolidamento Chiesa di San Giacomo Apostolo a S. Croce di Magliano. Available online: https://www.santacroceonline.com/2012/news/lug/1_15/sangiacomo/chiesasangiacomo.pdf.
8. (2020, February 03). TekPe Engineers—Seismic Retrofit Projects by TPE. Available online: http://www.tekpeengineers.com/seismic-retrofit.html.
9. Performance of masonry buildings and churches in the 22 February 2011 Christchurch earthquake10.5459/bnzsee.44.4.279-296 ↗
10. Numerical analysis of a masonry panel reinforced with pultruded FRP frames10.1007/s11029-018-9732-x ↗
11. Seismic Design of Pultruded FRP Structures as Ancillary and/or Independent Solution10.4028/www.scientific.net/KEM.747.586 ↗
12. (2020, February 03). Top Glass Sponsor Della “Glass House” all’Università di Venezia. Available online: https://www.topglass.it/notizia-padiglione-iuav/.
13. (2020, February 03). Kiora Footbridge. Available online: https://compositesuk.co.uk/system/files/documents/Case%20Study%20-%20Kiora%20Sluice%20Footbridge.pdf.
14. Investigation on lap-joint behavior of GFRP plates bonded to silica fume and rice husk ash concrete10.1016/S0143-7496(03)00050-2 ↗
15. Numerical investigation on structural glass beams with GFRP-embedded rods, including effects of pre-stress10.1016/j.compstruct.2017.10.027 ↗
16. Comparative study on dynamic parameters and seismic demand of pultruded FRP members and structures10.1016/j.compstruct.2017.05.006 ↗
17. Russo, S. (2011, January 6–8). Performance of a PFRP structure covering a historic building struck by an earthquake. Proceedings of the ACIC 2011, Coventry, UK.
18. BIA (1986). Anchor Bolts for Brick Masonry, Brick Industry Association. Technical Note No. 44.
19. Design of anchor bolts in masonry10.1002/pse.222 ↗
20. Experimental results on mechanical behavior of metal anchors in historic stone masonry10.1016/j.conbuildmat.2017.12.090 ↗
21. Experimental analysis of failure mechanisms in masonry-PFRP profiles connections10.1155/2018/5475347 ↗
22. (2016). Specification for Ancillary Components for Masonry Part 1: Wall Ties, Tension Straps, Hangers and Brackets, Comité Européen de Normalisation. EN 845-1:2013+A1:2016.
23. Masonry Standards Joint Committee (MSJC) (2005). Building Code Requirements for Masonry Structures (ACI 530-02/ASCE 5-02/TMS 402-02, The Masonry Society.
24. Preliminary investigation on FRP profiles for the structural retrofit of masonry structures10.4028/www.scientific.net/KEM.747.77 ↗
25. FE modelling and experimental investigation on adhesive joints between clay brick and pultruded FRP profiles10.1016/j.conbuildmat.2019.07.291 ↗
26. Half-scale tests on masonry panels strengthened with Pultruded FRP frames10.4028/www.scientific.net/KEM.817.95 ↗
27. (2005). Eurocode 8—Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Building, Comité Européen de Normalisation. EN 1998-1:2005.
28. Analysis and design of low-rise masonry and concrete walls retrofitted using steel strips10.1061/(ASCE)0733-9445(2000)126:9(1026) ↗
29. (2015). Methods of Test for Masonry Units—Part 1: Determination of Compressive Strength, Comité Européen de Normalisation. EN 772-1:2015.
30. (2006). Methods of Test for Mortar for Masonry—Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar, Comité Européen de Normalisation. EN 1015-11:2006.
31. (2007). Methods of Test for Masonry—Part 3: Determination of Initial shear Strength, Comité Européen de Normalisation. EN 1052-3:2007.
32. Hendry, A.W. (1981). Structural Brickwork, Macmillan.10.1007/978-1-349-81439-8 ↗
33. Compressive strength of solid caly brick masonry under eccentric loading
34. Tassios, T.P. (1988). Meccanica Delle Murature, Liguori.
35. Thorning, H. (2003). Fiberline Design Manual, Fiberline Composites A/S. [2nd ed.].