A Practical Model Study on the Mechanism of Clay Landslide under Static Loads: From the Perspective of Major Crack–Stress–Displacement
Source abstract
Abstract
Stability assessment of cracked clay slopes has been a research hotspot in geotechnical engineering in recent years. The assessment work should include crack initiation/development and stability evaluation. However, there has been no universal method for predicting crack evolution until now. In addition, scholars have paid little attention to the coupling relationship between the evolution of cracks and the progressive failure process of macroscopic clay slopes and have seldom studied the ubiquitous diagonal cracks in clay slopes. In this work, the stress mechanism for initiation and development of major cracks was derived based on unsaturated soil mechanics and critical state soil mechanics considering the tensile, compression, and shear properties of clay. The correctness of the proposed theory was verified by constructing a large-scale, arc-shaped slip surface clay slope model. In the model test, earth pressure cells and displacement gauge were employed to monitor development of stresses within the clay slope and horizontal displacement of the slope shoulder, respectively, under the set load sequence. The results showed that the stress mechanism proposed in this paper could judge not only vertical cracks but also diagonal cracks. Horizontal stresses near the primary crack appeared as a result of stress saltation. The locations and depths of the major cracks could be determined by analyzing the differences in horizontal stress between adjacent measuring points under the same load step. The development of major crack–horizontal stress–displacement had intrinsic consistency, and the initiation and development of major cracks aggravated changes in displacement and horizontal stresses. The perspective of major crack–stress–displacement is helpful to wholly grasp the progressive failure process of cracked clay slopes and provide a reference for prediction of clay landslides.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Landslides and related hazards · Geotechnical Engineering and Analysis · Soil and Unsaturated Flow
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Chongqing University, Chongqing 400045, China
Key Laboratory of New Technology for Construction of Cities in Mountain Area, Ministry of Education, Chongqing University, Chongqing 400045, China
References (64)
Show source-provided references
1. An interdisciplinary approach towards improved understanding of soil deformation during compaction10.1016/j.still.2012.10.004 ↗
2. Centrifuge model tests on clay based engineered barriers subjected to differential settlements10.1016/j.clay.2008.06.002 ↗
3. Characterizing drying-induced clayey soil desiccation cracking process using electrical resistivity method10.1016/j.clay.2017.11.001 ↗
4. Hu, F., Li, Z., Tian, Y., and Hu, R. (2021). Failure patterns and morphological soil–rock interface characteristics of frozen soil–rock mixtures under compression and tension. Appl. Sci., 11.10.3390/app11010461 ↗
5. Water infiltration in a cracked soil considering effect of drying-wetting cycles10.1016/j.jhydrol.2020.125640 ↗
6. Numerical simulation of desiccation cracking in a thin clay layer using 3D discrete element modeling10.1016/j.compgeo.2013.12.003 ↗
7. Quantitative analysis of relationships between crack characteristics and properties of soda-saline soils in Songnen Plain, China10.1007/s11769-015-0779-5 ↗
8. Tensile behavior of clayey soils during desiccation cracking process10.1016/j.enggeo.2020.105909 ↗
9. Experimental study on soil-water characteristic curve for silty clay with desiccation cracks10.1016/j.enggeo.2017.01.004 ↗
10. Experimental study on the mechanism of landslip crevices
11. Selection of parameters and method to determine forecasting standards for landslide
12. Analysis of deformation characteristics of clay
13. Experimental evidence of size effect in soil cracking10.1139/t11-102 ↗
14. Numerical and experimental study of initiation and propagation of desiccation cracks in clayey soils10.1016/j.compgeo.2018.09.015 ↗
15. An idealized framework for the analysis of cohesive soils undergoing desiccation10.1139/t97-015 ↗
16. Yan, S., Guo, B., Chu, J., and Sun, L. (2014, January 26–28). Mechanism study and model tests on soft clay cracking. Proceedings of the Geo-Shanghai 2014, Shanghai, China.10.1061/9780784413388.019 ↗
17. Crack patterns in clayey soils: Experiments and modeling10.1002/nag.1060 ↗
18. Tension crack development in soils10.1061/(ASCE)0733-9410(1988)114:8(915) ↗
19. Studies of crack dynamics in clay soil II. A physically based model for crack formation10.1016/j.geoderma.2004.07.008 ↗
20. Cracking in drying soils10.1139/t92-030 ↗
21. Kodikara, J.K., and Choi, X. (2006, January 2–6). A simplified analytical model for desiccation cracking of clay layers in laboratory tests. Proceedings of the Fourth International Conference on Unsaturated Soils, Carefree, AZ, USA.10.1061/40802(189)218 ↗
22. Experimental research on crack evolution process in fissured clay
23. Numerical simulation of crack formation due to desiccation in clay surface
24. Numerical modelling of transverse cracking in embankment dams10.1016/j.compgeo.2021.104028 ↗
25. Crack growth and plastic relaxation in a drying paste layer10.1143/JPSJ.79.124802 ↗
26. On the stability of fissured slopes subject to seismic action10.1002/nag.2498 ↗
27. Investigation by limit analysis on the stability of slopes with cracks10.1680/geot.11.P.068 ↗
28. Stability assessment of slopes with cracks using limit analysis10.1139/cgj-2012-0448 ↗
29. Limit analysis of slopes with cracks: Comparisons of results10.1016/j.enggeo.2015.01.013 ↗
30. Influence of both anisotropic friction and cohesion on the formation of tension cracks and stability of slopes10.1016/j.enggeo.2018.12.016 ↗
31. Stability analysis of crack slope considering nonlinearity and water pressure10.1007/s12205-015-0197-3 ↗
32. Effect of the vertical earthquake component on permanent seismic displacement of soil slopes based on the nonlinear Mohr–Coulomb failure criterion10.1016/j.sandf.2016.12.002 ↗
33. Seismic displacement along a log-spiral failure surface with crack using rock Hoek–Brown failure criterion10.1016/j.soildyn.2017.04.019 ↗
34. Static and seismic stability assessment of 3D slopes with cracks10.1016/j.enggeo.2019.105450 ↗
35. Zheng, Y.R., and Kong, L. (2010). Geotechnical Plastic Mechanics, China Architecture and Building Press.
36. Reply to the discussion by Utili on “Stability assessment of slopes with cracks using limit analysis”10.1139/cgj-2014-0142 ↗
37. Mechanical properties of fissured clay
38. Numerical simulation research on fissure effect of clay masses
39. Design of geosynthetic-reinforced slopes in cohesive backfills10.1016/j.geotexmem.2017.08.004 ↗
40. Geodynamical process and stability control of high rock slope development
41. Field investigation of deformation characteristics and stress mobilisation of a soil slope10.1007/s10346-015-0561-x ↗
42. DEM analysis of the crack propagation in brittle clays under uniaxial compression tests10.1002/nag.665 ↗
43. The effects of clay on landslides: A case study10.1016/j.clay.2007.01.007 ↗
44. Numerical modelling of laboratory soil desiccation cracking using UDEC with a mix-mode cohesive fracture model10.1016/j.enggeo.2015.12.028 ↗
45. Influence of structure on the behavior of a saturated clayey loess10.1139/cgj-2015-0200 ↗
46. Lu, N., and Likos, W.J. (2004). Unsaturated Soil Mechanics, John Wiley and Sons.
47. Sufficient conditions for existence of physically significant solutions in limiting equilibrium slope stability analysis10.1016/S0020-7683(03)00075-1 ↗
48. Tensile strength, tension cracks, and stability of slopes10.3208/sandf1972.21.2_1 ↗
49. An approach to the interpretation of the mechanical behaviour of intensely fissured clays10.3208/sandf.49.355 ↗
50. Localized deformation in intensely fissured clays studied by 2D digital image correlation10.1007/s11440-013-0208-9 ↗
51. Behaviour and mechanism of failure process of soil slopes10.1007/s12665-014-3522-0 ↗
52. Integrating GIS and stress transfer mechanism in mapping rainfall-triggered landslide susceptibility10.1016/j.enggeo.2008.04.003 ↗
53. Numerical modeling of failure process of soil slopes10.1061/(ASCE)GM.1943-5622.0000798 ↗
54. Crack spacing of unsaturated soils in the critical state10.1007/s11434-009-0319-8 ↗
55. Depth and spacing of tension cracks10.1029/JZ066i012p04273 ↗
56. Desiccation of a sensitive clay: Application of the model CRACK10.1139/t97-065 ↗
57. Stability of intact slopes with tensile strength cut-off10.1680/jgeot.16.P.037 ↗
58. Stability of intact slopes with tensile strength cut-off: Discussion10.1680/jgeot.17.D.014 ↗
59. Model experimental study on stress transfer and redistribution in a clay landslide under surcharge Load10.1155/2020/4269043 ↗
60. Vallejo, L.E. (2011, January 13–16). Fracture criteria for fissured clays under mixed-mode loading. Proceedings of the Geo-Frontiers Congress 2011, Dallas, TX, USA.10.1061/41165(397)394 ↗
61. Distribution characteristics of force and stability analysis of slope
62. Model testing and numerical simulation study of evolutionary process of thrust load caused landslide
63. Slope instability processes in intensely fissured clays: Case histories in the Southern Apennines10.1007/s10346-014-0516-7 ↗
64. First-time slides in over-consolidated clays10.1680/geot.1970.20.3.320 ↗