Mitigating the Impact of Mask Absorber Error on Lithographic Performance by Lithography System Holistic Optimization
Source abstract
Abstract
The non-ideal mask absorber can cause an increase in critical dimension error (CDE) and decrease in process window (PW). However, the random mask absorber errors induced during mask fabricating and measuring are not considered in computational lithography. The problem cannot be neglected as the continuous scaling of lithography technology node. In this work, for the first time to our knowledge, a source, numerical aperture (NA), and process parameters co-optimization (SNPCO) method is developed to reduce the CDE induced by absorber errors and improve the PW. First, the source is represented by Zernike polynomials to balance computational burden and flexibility of source. Then a weighted cost function containing CDE and PW that incorporates the influences of absorber errors is created. Finally, a statistical optimization method is used to optimize the lithographic system parameters. Simulations of 1D mask pattern show that for the system with extreme absorber errors, the pattern errors of the proposed method are reduced by 62.1% and 58.9%, and the PWs are increased by 40.3% and 36.4%, respectively. The results illustrate that this method is effective in mitigating the CDE caused absorber errors and improving process robustness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Photolithography Techniques · Advanced Measurement and Metrology Techniques · Advanced optical system design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Photoelectronic Imaging Technology and System of Ministry of Education of China, School of Optics and Photonics, Beijing Institute of Technology, Beijing 100081, China
Funding
National Science and Technology Major Project · General Program of National Natural Science Foundation of China
References (29)
Show source-provided references
1. A roadmap for optical lithography10.1364/OPN.21.6.000026 ↗
2. Azpiroz, J.T., Burchard, P., and Yablonovitch, E. (2003, January 26). Boundary layer model to account for thick mask effects in photolithography. Proceedings of the SPIE 5040, Optical Microlithography XVI, Santa Clara, CA, USA.
3. Bai, M., Melvin, L.S., Yan, Q., Shiely, J.P., Falch, B.J., Fu, C., and Wang, R. (2005, January 6). Approximation of three dimensional mask effects with two dimensional features. Proceedings of the SPIE 5751, Emerging Lithographic Technologies IX, Bellingham, WA, USA.10.1117/12.600547 ↗
4. Impact of 14-nm photomask uncertainties on computation lithography solutions10.1117/1.JMM.13.1.011004 ↗
5. Yoshizawa, M., Philipsen, V., and Leunissen, L. (2006, January 13). Optimizing absorber thickness of attenuating phase shifting Masks for Hyper-NA Lithography. Proceedings of the SPIE 6154, Optical Microlithography XIX, San Jose, CA, USA.10.1117/12.659823 ↗
6. Liu, P. (2011, January 13). Accurate prediction of 3D mask topography induced best focus variation in full-chip photolithography applications. Proceedings of the SPIE 8166, Photomask Technology, Monterey, CA, USA.10.1117/12.898783 ↗
7. Yu, T., Lio, E., Chen, P., Wei, C., Chen, Y., Peng, M., Chou, W., and Yu, C. (2016, January 3). UDOF direct improvement by modulating mask absorber thickness. Proceedings of the SPIE 9985, Photomask Technology, San Jose, CA, USA.10.1117/12.2234760 ↗
8. Mitigation of mask three-dimensional induced phase effects by absorber optimization in ArFi and extreme ultraviolet lithography10.1117/1.JMM.15.2.021408 ↗
9. Bouma, A., Miyazaki, J., Veen, M.V., and Finders, J. (2014, January 17). Impact of mask absorber and quartz over-etch on mask 3D induced best focus shifts. Proceedings of the SPIE 9231, 30th European Mask and Lithography Conference, Dresden, Germany.10.1117/12.2068155 ↗
10. Cho, J., Baek, S., and Nam, K. (2002, January 1). Fogging and pattern loading effect by writing strategy. Proceedings of the SPIE 4754, Photomask and Next Generation Lithography Mask Technology IX, Yokohama, Japan.10.1117/12.476943 ↗
11. Jia, N., Yang, S.-H., Kim, S., and Choi, J. (2014, January 31). Study of lens heating behavior and thick mask effects with a computational method. Proceedings of the SPIE 9052, Optical Microlithography XXVII, San Jose, CA, USA.10.1117/12.2045366 ↗
12. Plumhoff, J., Constantine, C., Shin, J., and Rausa, E. (2002, January 1). Improvements in MoSi EAPSM CD bias and iso-dense linearity plasma etch results utilizing design of experiments process optimization of Gen III ICP plasma source. Proceedings of the SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, Yokohama, Japan.10.1117/12.476973 ↗
13. Mueller, M., Komarov, S., and Baik, K.-H. (2003, January 28). High-Resolution Etching of MoSi using Electron Beam patterned chemically amplified resist. Proceedings of the SPIE 5130, Photomask and Next Generation Lithography Mask Technology X, Yokohama, Japan.10.1117/12.504195 ↗
14. Sturtevant, J., Buck, P., Schulze, S., and Fryer, D. (2014, January 17). 14-nm photomask simulation sensitivity. Proceedings of the SPIE 9231, 30th European Mask and Lithography Conference, Dresden, Germany.10.1117/12.2066483 ↗
15. Rigorous electromagnetic field simulation of the impact of photomask line-edge and line-width roughness on lithographic processes10.1117/1.JMM.11.1.013004 ↗
16. Wistrom, R., Sakamoto, Y., Panton, J., Faure, T., Isogawa, T., and McGuire, A. (2013, January 9). Controlling the sidewall angle of advanced attenuated phase-shift photomasks for 14nm and 10nm lithography. Proceedings of the SPIE 8880, Photomask Technology, Monterey, CA, USA.10.1117/12.2026853 ↗
17. Influence of a non-ideal sidewall angle of extreme ultra-violet mask absorber for 1×-nm patterning in isomorphic and anamorphic lithography10.1016/j.mee.2017.06.007 ↗
18. Lens wavefront compensation for 3D photomask effects in subwavelength optical lithography10.1364/AO.52.000314 ↗
19. Fühner, T., Evanschitzky, P., and Erdmann, A. (2012, January 13). Mutual source, mask and projector pupil optimization. Proceedings of the SPIE 8326, Optical Microlithography XXV, San Jose, CA, USA.10.1117/12.916529 ↗
20. Robust source and mask optimization compensating for mask topography effects in computational lithography10.1364/OE.22.009471 ↗
21. Inverse pupil wavefront optimization for immersion lithography10.1364/AO.53.006861 ↗
22. Co-optimization of the mask, process, and lithography-tool parameters to extend the process window10.1117/1.JMM.13.1.013015 ↗
23. Algorithm for computation of Zernike polynomials expansion coefficients10.1364/AO.28.000749 ↗
24. Efficient source mask optimization with Zernike polynomial functions for source representation
25. Illumination source optimization in optical lithography via derivative-free optimization10.1364/JOSAA.31.000B19 ↗
26. Learning rate adaptation in stochastic gradient descent10.1007/978-1-4613-0279-7_27 ↗
27. Robust hybrid source and mask optimization to lithography source blur and flare10.1364/AO.54.005291 ↗
28. (2019, March 04). International Technology Roadmap for Semiconductors. Available online: http://www.itrs2.net/.
29. Owa, S., Wakamoto, S., Murayama, M., Yaegashi, H., and Oyama, K. (2014, January 31). Immersion lithography extension to sub-10 nm nodes with multiple patterning. Proceedings of the SPIE 9052, Optical Microlithography XXVII, San Jose, CA, USA.10.1117/12.2046604 ↗