journal article·2019-04-22Open access

Evaluation of the Undrained Shear Strength in Preconsolidated Cohesive Soils Based on the Seismic Dilatometer Test

Paweł Galas, Zbigniew Lechowicz, Maria Jolanta Sulewska

Applied Sciences· Volume 9· Issue 8

Abstract

The undrained shear strength in cohesive soils can be evaluated based on measurements obtained from the standard dilatometer test (DMT) using single- and multi-factor empirical relationships. However, the empirical relationships presented in the literature may sometimes show relatively high values of the maximum relative error. The add-on seismic module to the seismic dilatometer test (SDMT) extends parameters measurable in a standard dilatometer test by the shear wave velocity Vs as an independent variable. Therefore, a method for evaluating the undrained shear strength in cohesive soils based on data obtained from the seismic dilatometer test is presented in this study. In the method proposed, the two-factor empirical relationship for evaluating the normalized undrained shear strength τfu/σ’v is used based on independent variables: The normalized difference between the corrected second pressure reading and the corrected first pressure reading (p1 − po)/σ’v and the normalized shear wave velocity Vs/100. The proposed two-factor empirical relationship provides a more reliable evaluation of the undrained shear strength in the tested Pleistocene and Pliocene clays in comparison to the empirical relationships presented in the literature, with a maximum relative error max RE at about ±20% and the mean relative error RE at about 8%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Civil and Environmental Engineering, Warsaw University of Life Sciences–SGGW, Nowoursynowska 159 St., 02-776 Warsaw, Poland

Faculty of Civil and Environmental Engineering, Bialystok University of Technology, Wiejska 45E St., 15-351 Bialystok, Poland

References (57)

Show source-provided references
1. Mayne, P.W., Coop, M.R., Springman, S.M., Huang, A.B., and Zornberg, J.G. (2009, January 18–21). Geomaterial behaviour and testing. Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria, Egypt. State of the Art (SOA) paper.
2. Robertson, P.K. (2012, January 18–21). The James K. Mitchell Lecture: Interpretation of in-situ tests—Some insights. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
3. Marchetti, S. (1975, January 1–4). A new in situ test for the measurement of horizontal soil deformability. Proceedings of the Conference on In Situ Measurement of Soil Properties, ASCE, Raleigh, NC, USA.
4. In Situ Tests by Flat Dilatometer
5. Marchetti, S. (2015, January 14–16). Some 2015 Updates to the TC16 DMT Report 2001. Proceedings of the 3rd International Conference on the Flat Dilatometer (DMT’15), Roma, Italy.
6. Marchetti, S. (2015, January 16–19). Flat dilatometer (DMT). Applications and recent developments. Proceedings of the Indian Geotechnical Conference, Pune, India.
7. Marchetti, S., Monaco, P., Totani, G., and Calabrese, M. (2001, January 21–24). The flat dilatometer test (DMT) in soil investigations—A report by the ISSMGE Committee TC16. Proceedings of the International Conference on Insitu Measurement of Soil Properties and Case Histories, Bali, Indonesia.
8. Marchetti, S., and Crapps, D.K. (1981). Flat Dilatometer Manual, GPE. Internal Report of GPE.
9. Lutenegger, A.J. (1988, January 20–24). Current status of the Marchetti dilatometer test. Proceedings of the 1st International Symposium on Penetration Testing (ISOPT-1), Orlando, FL, USA.
10. Briaud, J.L., and Miran, J. (1991). The Flat Dilatometer Test.
11. Ozer, A.T., Bartlett, S.F., and Lawton, E.C. (2006, January 2–5). DMT testing for consolidation properties of the Lake Bonneville Clay. Proceedings of the 2nd International Flat Dilatometer Conference, Washington, DC, USA.
12. Schnaid, F. (2009). In Situ Testing in Geomechanics—The Main Tests, Taylor & Francis Group.10.1201/9781482266054 ↗
13. Settlement evaluation of spread foundations on heavily preconsolidated cohesive soils10.2478/v10060-008-0097-z ↗
14. Robertson, P.K. (2015, January 14–16). Soil behavior type using the DMT. Proceedings of the 3rd International Flat Dilatometer Conference, Roma, Italy.
15. Cao, L., Chang, M.F., and Teh, C.I. (2015, January 14–16). Analysis of dilatometer test in clay. Proceedings of the 3rd International Conference on the Flat Dilatometer (DMT’15), Roma, Italy.
16. On the influence of overconsolidation effect on the compressibility assessment of subsoil by means of CPTU and DMT10.1515/sggw-2016-0015 ↗
17. Effects of the procedure on flat dilatometer test (DMT) results in intermediate soils10.1139/cgj-2015-0463 ↗
18. Marchetti, S., Monaco, P., Totani, G., and Marchetti, D. (2008). In situ tests by Seismic Dilatometer (SDMT). From Research to Practice in Geotechnical Engineering, Proceedings of the GeoCongress 2008, New Orleans, LA, USA, 9–12 March 2008, ASCE Library.10.1061/40962(325)7 ↗
19. Marchetti, S. (2014, January 18–20). The seismic dilatometer for in situ soil investigations. Proceedings of the Indian Geotechnical Conference IGC-2014, Kakinada, India.
20. Seismic Flat Dilatometer tests in Connecticut Valley varved clay10.1520/GTJ19970011 ↗
21. Seismic Flat Dilatometer in Piedmont residual soils
22. Cavallaro, A., Grasso, S., and Maugeri, M. (2006, January 2–5). Clay soil characterization by the New Seismic Dilatometer Marchetti Test (SDMT). Proceedings of the Second International Flat Dilatometer Conference, Washington, DC, USA.
23. Cavallaro, A., Ferraro, A., Grasso, S., and Maugeri, M. (2008, January 8–11). Site Response Analysis of the Monte Po Hill in the City of Catania. Proceedings of the 2008 Seismic Engineering International Conference Commemorating the 1908 Messina and Reggio Calabria Earthquake MERCEA’08, Reggio Calabria and Messina, Italy.10.1063/1.2963841 ↗
24. Carroll, R., Long, M., and Ward, D. (2012, January 18–21). Use of CPTU and SDMT to characterise silty soil. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
25. Rivera-Cruz, I., Howie, J., Vargas-Herrera, L.A., Coto-Loria, M., and Luna-Gonzales, O. (2012, January 18–21). A new approach for identification of soil behaviour type from seismic dilatometer (SDMT) data. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
26. Totani, G., Monaco, P., Marchetti, S., and Marchetti, D. (2009, January 18–21). Vs measurements by seismic dilatometer (SDMT) in non-penetrable soils. Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria, Egypt.
27. Tsukamoto, K. (2009, January 15–17). Interrelationship between small strain modulus Go and operative modulus. Proceedings of the International Conference on Performance-Based Design in Earthquake Geotechnical Engineering (IS-Tokyo 2009), Tsukuba, Japan.
28. Młynarek, Z., Wierzbicki, J., and Stefaniak, K. (2012, January 18–21). Deformation characteristics of overconsolidated subsoil from CPTU and SDMT tests. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
29. Amoroso, S., Monaco, P., and Marchetti, D. (2012, January 18–21). Use of the Seismic Dilatometer (SDMT) to estimate in situ G-γ decay curves in various soil types. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
30. Vargas, L.A., and Coto, M. (2012, January 18–21). Experiences in the use of DMT-SDMT in Costa Rica, Central America. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
31. Cavallaro, A., Capilleri, P., and Grasso, S. (2018). Site Characterization by in Situ and Laboratory Tests for Liquefaction Potential Evaluation during Emilia Romagna Earthquake. Geosciences, 8.10.3390/geosciences8070242 ↗
32. Arroyo, M., Di Mariano, A., Monaco, P., Devincenzi, M., and Perez, N. (2008, January 1–4). SDMT—based deep excavation design. Proceedings of the Third International Conference on Geotechnical and Geophysical Site Characterization, Taipei, Taiwan.
33. Młynarek, Z., Gogolik, S., Gryczmański, M., and Ulniarz, R. (2012, January 18–21). Settlement analysis of a cylindrical tank based on CPTU and SDMT results. Proceedings of the Fourth International Conference on Geotechnical and Geophysical Site Characterization, Porto de Galinhas, Brazil.
34. Kulhawy, F.H., and Mayne, P.W. (1990). Manual on Estimating Soil Properties for Foundation Design, Electric Power Research Institute. Report EK-6800.
35. On the compressibility and shear strength of natural soils10.1680/geot.1990.40.3.329 ↗
36. Statistical fitting of undrained strength data10.1680/geot.13.P.007 ↗
37. Multivariate distribution for undrained shear strengths under various test procedures10.1139/cgj-2013-0002 ↗
38. Roque, R., Janbu, N., and Senneset, K. (1988, January 20–24). Basic interpretation procedures of flat dilatometer tests. Proceedings of the 1st International Symposium on Penetration Testing, Orlando, FL, USA.
39. Smith, M.G., and Houlsby, G.T. (June, January 28). Interpretation of the Marchetti Dilatometer in Clay. Proceedings of the 11th European Conference on Soil Mechanics and Foundation Engineering, Kopenhaga, Denmark.
40. Evaluation of in situ strength and deformation characteristics of soils using a Flat Dilatometer
41. Rabarijoely, S. (2000). The Use of Dilatometer Test for Evaluation of Organic Soil Parameters. [Ph.D. Thesis, Warsaw Agricultural University—SGGW]. (In Polish).
42. Galas, P. (2013). Determination of Undrained Shear Strength Based on Seismic Dilatometer Test SDMT. [Ph.D. Thesis, Warsaw University of Life Sciences—SGGW]. (In Polish).
43. Yu, H.S., Carter, J.P., and Booker, J.R. (1993). Analysis of the dilatometer test in undrained clay. Predictive Soil Mechanics, Proceedings of the Wroth Memorial Symposium, Oxford, UK, 27–29 July 1993, ICE Virtual Library.
44. Evaluation of undrained shear strength of cohesive soils using a flat dilatometer10.3208/sandf1972.35.2_111 ↗
45. Lutenegger, A.J. (2006, January 2–5). Cavity expansion model to estimate undrained shear strength in soft clay from dilatometer. Proceedings of the Second International Flat Dilatometer Conference, Washington, DC, USA.
46. Hong, S.J., Shin, D.H., Yoon, H.K., Lee, C., Lee, W., and Kim, Y.U. (2008, January 1–4). Strength and modulus of Busan clay by DMT. Proceedings of the Third International Conference on Geotechnical and Geophysical Site Characterization, Taipei, Taiwan.
47. Silvestri, V., and Tabib, C. (2015, January 14–16). Application of the MCC model for the estimation of undrained geotechnical parameters of clays from dilatometer tests. Proceedings of the 3rd International Conference on the Flat Dilatometer (DMT’15), Roma, Italy.
48. Lechowicz, Z., Fukue, M., Rabarijoely, S., and Sulewska, M.J. (2018). Evaluation of the undrained shear strength of organic soils from a dilatometer test using artificial neural networks. Appl. Sci., 8.10.3390/app8081395 ↗
49. (2017). ISO 22476-11:2017 Geotechnical Investigation and Testing—Field Testing—Part 11: Flat Dilatometer Test, International Organization for Standardization.
50. (2015). ASTM D6635—15 Standard Test Method for Performing the Flat Plate Dilatometer, ASTM International.
51. Determination of undrained shear strength and constrained modulus from DMT for stiff overconsolidated clays10.1515/sggw-2017-0009 ↗
52. EN ISO 14688-1:2002 (2002). Geotechnical Investigation and Testing—Identification and Classification of Soil—Part 1: Identification and Description, International Organization for Standardization.
53. EN ISO 14688-2:2004 (2004). Geotechnical Investigation and Testing—Identification and Classification of Soil—Part 2: Principles for a Classification, International Organization for Standardization.
54. (2002). STATISTICA—Package Documentation, StatSoft Polska Ltd.. (In Polish).
55. Stanisz, A. (2006). Accessible Statistics Course Using STATISTICA PL on the Examples of Medicine, StatSoft Polska Ltd.. (In Polish).
56. Stanisz, A. (2007). Accessible Statistics Course Using STATISTICA PL on the Examples of Medicine, StatSoft Polska Ltd.. (In Polish).
57. Draper, N.R., and Smith, H. (1998). Applied Regression Analysis, Wiley. [3rd ed.].10.1002/9781118625590 ↗