journal article·2019-11-26Open access

Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire

Yousub Lee, Yashwanth Bandari, Peeyush Nandwana, Brian. T. Gibson, Brad Richardson, Srdjan Simunovic

Applied Sciences· Volume 9· Issue 23

Abstract

Laser metal deposition with wire (LMD-w) is a developing additive manufacturing (AM) technology that has a high deposition material rate and efficiency and is suitable for fabrication of large aerospace components. However, control of material properties, geometry, and residual stresses is needed before LMD-w technology can be widely adopted for the construction of critical structural components. In this study, we investigated the effect of interlayer cooling time, clamp constraints, and tool path strategy on part distortion and residual stresses in large-scale laser additive manufactured Ti-6Al-4V components using finite element method (FEM). The simulations were validated with the temperature and the distortion measurements obtained from a real LMD-w process. We found that a shorter interlayer cooling time, full clamping constraints on the build plates, and a bidirectional tool path with 180° rotation minimized part distortion and residual stresses and resulted in symmetric stress distribution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA

Manufacturing Demonstration Facility, Oak Ridge National Laboratory, Knoxville, TN 37932, USA

Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA

EWI Buffalo Manufacturing Works, 683 Northland Ave., Buffalo, NY 14211, USA

Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA

Funding

U.S. Department of Energy · Oak Ridge National Laboratory

References (33)

Show source-provided references
1. Scientific, technological and economic issues in metal printing and their solutions10.1038/s41563-019-0408-2 ↗
2. Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti 6Al 4V10.1016/j.msea.2019.03.001 ↗
3. Towards an integrated experimental and computational framework for large-scale metal additive manufacturing10.1016/j.msea.2019.138057 ↗
4. Simunovic, S., Nycz, A., Noakes, M.W., Chin, C., and Oancea, V. (2017). Process Modeling and Validation for Metal Big Area Additive Manufacturing, NAFEMS World Congress.
5. Role of scan strategies on thermal gradient and solidification rate in electron beam powder bed fusion
6. Residual stress and texture control in Ti-6Al-4V wire+ arc additively manufactured intersections by stress relief and rolling10.1016/j.matdes.2018.03.065 ↗
7. Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys10.1016/j.jmatprotec.2014.07.030 ↗
8. Effects of Interpass Idle Time on Thermal Stresses in Multipass Multilayer Weld-Based Rapid Prototyping10.1115/1.4023363 ↗
9. Aggarangsi, P., and Beuth, J.L. (2006, January 8–10). Localized preheating approaches for reducing residual stress in additive manufacturing. Proceedings of the SFF Symposium, Austin, TX, USA.
10. Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification10.1007/s11661-018-4702-4 ↗
11. Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts10.1016/j.commatsci.2011.06.023 ↗
12. Printability of alloys for additive manufacturing10.1038/srep19717 ↗
13. Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V
14. Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates10.1016/j.jmatprotec.2016.06.032 ↗
15. Lee, Y., Bandari, Y.K., Simunovic, S., Richardson, B.S., and Kirka, M.M. (2018). Correlations of Interlayer Time with Distortion of Large Ti-6Al-4V Components in Laser Metal Deposition with Wire, Oak Ridge National Lab. (ORNL).
16. ABAQUS (2017). Analysis User’s Manual, Dassault Systémes Simulia Corp.
17. A metallurgical phase transformation framework applied to SLM additive manufacturing processes10.1016/j.matdes.2019.107618 ↗
18. Salerno, L.J., and Kittel, P. (1997). Thermal Contact Conductance, NASA Technical Memorandum 110429, Ames Research Center.
19. A new finite element model for welding heat sources10.1007/BF02667333 ↗
20. Using JMatPro to model materials properties and behavior10.1007/s11837-003-0013-2 ↗
21. Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V10.1016/j.ijplas.2013.04.003 ↗
22. Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V10.1007/s11837-015-1797-6 ↗
23. A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components10.1016/j.matdes.2015.09.115 ↗
24. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
25. Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V10.1007/s11661-012-1444-6 ↗
26. Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation10.1016/j.matdes.2016.11.078 ↗
27. A tool-path generation strategy for wire and arc additive manufacturing10.1007/s00170-014-5808-5 ↗
28. A modular path planning solution for Wire+ Arc Additive Manufacturing10.1016/j.rcim.2019.05.009 ↗
29. Saboori, A., Gallo, D., Biamino, S., Fino, P., and Lombardi, M. (2017). An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties. Appl. Sci., 7.10.3390/app7090883 ↗
30. Investigation of the effect of clamping on residual stresses and distortions in butt-welded plates
31. Tsunori, M., Davies, C.M., Dye, D., and Nikbin, K.M. (2008, January 27–31). Numerical modelling of residual stress and distortion in welded thin steel plates. Proceedings of the ASME 2008 Pressure Vessels and Piping Conference, Chicago, IL, USA.10.1115/PVP2008-61170 ↗
32. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
33. Response of Ti microstructure in mechanical and laser forming processes10.1007/s10853-018-2650-4 ↗