journal article·2019-11-20Open access

Influence of Pre-Ionized Plasma on the Dynamics of a Tin Laser-Triggered Discharge-Plasma

Qiang Xu, Xiaolong Deng, He Tian, Yongpeng Zhao, Qi Wang

Applied Sciences· Volume 9· Issue 23

Abstract

The effect of laser-current delay on extreme ultraviolet emission by laser-triggered discharge-plasma has been investigated. Typical waveforms for current, voltage, laser signals, and X-ray signals have been compared. Theoretical tin spectra were simulated among the electron temperature ranges from 10 to 50 eV to compare with the experimental results. The results show that longer laser-current delay time is propitious to increase the steady-state time of plasma at high temperatures, and it increases the intensity and spectral purity of 13.5 nm emission in 2% band. The 13.5 nm radiation intensity increases about 120% with the delay increasing from 0.7 to 5 μs, and the extreme ultraviolet (EUV) emission conversion efficiency (CE) increases from 0.5% to 1.1%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser-induced spectroscopy and plasma · Plasma Diagnostics and Applications · Atomic and Molecular Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Science, Northeast Forestry University, Harbin 150040, China

National Key Laboratory of Science and Technology on Tunable Laser, Harbin Institute of Technology, Harbin 150080, China

Funding

the Fundamental Research Funds for the Central Universities · Northeast Forestry University Students' Innovation and Entrepreneurship Training Program

References (33)

Show source-provided references
1. Update of EUV Source Development Status for HVM Lithography10.2961/jlmn.2016.02.0021 ↗
2. Angular and Spectral Bandwidth of Extreme UV Multilayers Near Spacer Material Absorption Edges10.1166/jnn.2019.16478 ↗
3. Low-line edge roughness extreme ultraviolet photoresists of organotin carboxylates10.1117/1.JMM.14.4.043506 ↗
4. Tin laser-produced plasma as the light source for extreme ultraviolet lithography high-volume manufacturing: History, ideal plasma, present status, and prospects10.1117/1.JMM.11.2.021109 ↗
5. Ion and extreme ultraviolet emission features of CO 2 laser produced Sn and SnO 2 plasmas10.1016/j.vacuum.2016.10.015 ↗
6. Development of a collective Thomson scattering system for laser-produced tin plasmas for extreme-ultraviolet light sources10.7567/APEX.8.126101 ↗
7. Laser-assisted vacuum arc extreme ultraviolet source: A comparison of picosecond and nanosecond laser triggering10.1088/0022-3727/49/22/225201 ↗
8. Beckers, J., Van de Ven, T., Van der Horst, R., Astakhov, D., and Banine, V. (2019). EUV-Induced Plasma: A Peculiar Phenomenon of a Modern Lithographic Technology. Appl. Sci., 9.10.3390/app9142827 ↗
9. Physical processes in EUV sources for microlithography10.1088/0022-3727/44/25/253001 ↗
10. EUV microscopy for defect inspection by dark-field mapping and zone plate zooming10.1088/1742-6596/186/1/012030 ↗
11. Perspective: Towards single shot time-resolved microscopy using short wavelength table-top light sources10.1063/1.5082686 ↗
12. High-brightness laser-induced EUV source based on tin plasma with an unlimited lifetime of electrodes10.1070/QE2016v046n01ABEH015657 ↗
13. Investigation of the dynamics of theZ-pinch imploding plasma for a laser-assisted discharge-produced Sn plasma EUV source10.1088/0022-3727/44/14/145203 ↗
14. Subnanosecond Thomson scattering on a vacuum arc discharge in tin vapor10.1103/PhysRevE.72.026415 ↗
15. Electrical Recovery After Laser-Assisted Discharge for Highly Repetitive Plasma EUV Source10.1109/TPS.2011.2162004 ↗
16. Laser-induced extreme UV radiation sources for manufacturing next-generation integrated circuits10.1070/QE2009v039n10ABEH014028 ↗
17. Dependence of current rise time on laser-triggered discharge plasma10.1088/0022-3727/49/29/295207 ↗
18. Triggering of high voltage discharge by femtosecond laser filaments on different wavelengths10.1016/j.optcom.2011.07.058 ↗
19. Xu, Q., Tian, H., Zhao, Y., and Wang, Q. (2019). Effect of Time Delay on Laser-Triggered Discharge Plasma for a Beyond EUV Source. Symmetry, 11.10.3390/sym11050658 ↗
20. Interaction of a CO2 Laser Pulse With Tin-Based Plasma for an Extreme Ultraviolet Lithography Source10.1109/TPS.2009.2034379 ↗
21. Influence of a magnetic field on laser-produced Sn plasma10.1088/0963-0252/24/5/055012 ↗
22. Plasma dynamics in the initial stage of a laser-triggered discharge-plasma10.1063/1.5053443 ↗
23. Dynamic Characteristics of Laser-Assisted Discharge Plasmas for Extreme Ultraviolet Light Sources10.1143/JJAP.49.096202 ↗
24. The physics of fast Z pinches10.1103/RevModPhys.72.167 ↗
25. The past, present, and future of Z pinches10.1063/1.874047 ↗
26. Effect of current on multiple pinches of Xe plasma in capillary discharge10.1140/epjd/e2013-40395-7 ↗
27. The Theory of Atomic Structure and Spectra10.1063/1.2915135 ↗
28. Detailed investigations on radiative opacity and emissivity of tin plasmas in the extreme-ultraviolet region10.1103/PhysRevE.82.026409 ↗
29. Spectroscopy of highly charged ions for extreme ultraviolet lithography
30. Statistical Approach to the Spectra of Plasmas10.1088/0031-8949/1992/T40/008 ↗
31. X-ray emission in laser-produced plasmas10.1063/1.1662796 ↗
32. Density and x-ray emission profile relationships in highly ionized high-Z laser-produced plasmas10.1063/1.4916395 ↗
33. Gd plasma source modeling at 6.7 nm for future lithography10.1063/1.3666042 ↗