journal article·2020-08-26Open access

Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique

Jihyun Jun, Kyung-Young Jhang

Applied Sciences· Volume 10· Issue 17

Abstract

This paper proposes an indirect method to measure absolute acoustic nonlinearity parameters using surface acoustic waves by employing a fully non-contact laser-ultrasonic technique. For this purpose, the relationship between the ratio of relative acoustic nonlinearity parameters measured using the proposed method in two different materials (a test material and a reference material) and the ratio of absolute acoustic nonlinearity parameters in these two materials was theoretically derived. Using this relationship, when the absolute nonlinearity parameter of the reference material is known, the absolute nonlinearity parameter of the test material can be obtained using the ratio of the measured relative parameters of the two materials. For experimental verification, aluminum and copper specimens were used as reference and test materials, respectively. The relative acoustic nonlinearity parameters of the two materials were measured from surface waves generated and received using lasers. Additionally, the absolute parameters of aluminum and copper were measured using a conventional direct measurement method, with the former being used as a reference value and the latter being used for comparison with the estimation result. The absolute parameter of copper estimated by the proposed method showed good agreement with the directly measured result.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Convergence Engineering, Graduate School, Hanyang University, Seoul 04763, Korea

School of Mechanical Engineering, Hanyang University, Seoul 04763, Korea

Funding

Ministry of Science, ICT & Future Planning, National Research Foundation of Korea (NRF)

References (21)

Show source-provided references
1. Air-coupled detection of nonlinear Rayleigh surface waves to assess material nonlinearity10.1016/j.ultras.2014.04.020 ↗
2. Assessment of accumulated fatigue damage in solid plates using nonlinear Lamb wave approach10.1063/1.2714333 ↗
3. Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves10.1063/1.2204807 ↗
4. Assessment of Thermal Aging of Aluminum Alloy by Acoustic Nonlinearity Measurement of Surface Acoustic Waves10.1080/09349847.2016.1261213 ↗
5. Creep degradation characterization of titanium alloy using nonlinear ultrasonic technique10.1016/j.ndteint.2015.02.001 ↗
6. Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves10.1121/1.2221557 ↗
7. Experimental study of nonlinear Rayleigh wave propagation in shot-peened aluminum plates—Feasibility of measuring residual stress10.1016/j.ndteint.2010.09.008 ↗
8. Fatigue damage assessment by nonlinear ultrasonic materials characterization10.1016/S0041-624X(97)00040-1 ↗
9. Fatigue damage evaluation in A36 steel using nonlinear Rayleigh surface waves10.1016/j.ndteint.2012.02.002 ↗
10. Kim, J.-Y., Jacobs, L., and Qu, J. (2019). Nonlinear Ultrasonic Techniques for Material Characterization. Nonlinear Ultrasonic and Vibro-Acoustical Techniques for Nondestructive Evaluation, Springer.10.1007/978-3-319-94476-0_6 ↗
11. Thermal degradation evaluation of HP40Nb alloy steel after long term service using a nonlinear ultrasonic technique10.1007/s10921-013-0222-8 ↗
12. Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameters10.1080/09349847.2016.1174322 ↗
13. Relationship between second- and third-order acoustic nonlinear parameters in relative measurement10.1016/j.ultras.2014.10.009 ↗
14. Relative measurement of the acoustic nonlinearity parameter using laser detection of an ultrasonic wave10.1007/s12541-017-0160-y ↗
15. Gross, J., Kim, J.-Y., Jacobs, L., Kurtis, K., and Qu, J. (2013). Evaluation of near surface material degradation in concrete using nonlinear Rayleigh surface waves. AIP Conference Proceedings, American Institute of Physics.10.1063/1.4789194 ↗
16. Method and analysis for determining yielding of titanium alloy with nonlinear Rayleigh surface waves10.1016/j.msea.2016.05.077 ↗
17. Noncontact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy10.1080/09349847.2014.934496 ↗
18. Jun, J., Seo, H., and Jhang, K.-Y. (2020). Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by Measuring Acoustic Nonlinearity of Laser-Generated Surface Acoustic Waves. Metals, 10.10.3390/met10010038 ↗
19. Review of Second Harmonic Generation Measurement Techniques for Material State Determination in Metals10.1007/s10921-014-0273-5 ↗
20. Frequency response of narrowband surface waves generated by laser beams spatially modulated with a line-arrayed slit mask10.3938/jkps.60.26 ↗
21. Time-Delay and Phase-Shift Measurements for Ultrasonic Pulses Using Autocorrelation Methods10.1063/1.356337 ↗