journal article·2021-06-09Open access

Thermal and Mechanical Behavior of Elastomers Incorporated with Thermoregulating Microcapsules

Ana M. Borreguero, Irene Izarra, Ignacio Garrido, Patrycja J. Trzebiatowska, Janusz Datta, Ángel Serrano, Juan F. Rodríguez, Manuel Carmona

Applied Sciences· Volume 11· Issue 12

Abstract

Polyurethane (PU) is one of the principal polymers in the global plastic market thanks to its versatility and continuous improvement. In this work, PU elastomeric materials having thermoregulating properties through the incorporation of microcapsules (mSD-(LDPE·EVA-RT27)) from low-density polyethylene and vinyl acetate containing paraffin®RT27 as PCM were produced. Elastomers were synthesized while varying the molar ratio [NCO]/[OH] between 1.05 and 1.1 and the microcapsule (MC) content from 0.0 to 20.0 wt.%. The successful synthesis of the PUs was confirmed by IR analyses. All the synthesized elastomers presented a structure formed by a net of spherical microparticles and with a minimum particle size for those with 10 wt.% MC. The density and tensile strength decreased with the MC content, probably due to worse distribution into the matrix. Elastomer E-1.05 exhibited better structural and stability properties for MC contents up to 15 wt.%, whereas E-1.1, containing 20 wt.% MC, revealed mechanical and thermal synergy effects, demonstrating good structural stability and the largest latent heat. Hence, elastomers having a large latent heat (8.7 J/g) can be produced by using a molar ratio [NCO]/[OH] of 1.1 and containing 20 wt.% mSD-(LDPE·EVA-RT27).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Polymer Nanocomposites and Properties · Carbon dioxide utilization in catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, University of Castilla—La Mancha, Av. Camilo José Cela s/n, 13004 Ciudad Real, Spain

Department of Applied Mechanics and Engineering Projects, University of Castilla—La Mancha, Av. Carlos III s/n, 45071 Toledo, Spain

Department of Environmental Technology, Faculty of Chemistry, University of Gdansk, Wita Stwosza 63, 80-952 Gdansk, Poland

Department of Polymer Technology, Chemical Faculty, Gdansk University of Technology, G. Narutowicza Street 11/12, 80-233 Gdansk, Poland

Centro de Investigación Cooperativa de Energías Alternativas (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Parque Tecnológico de Alava, Albert Einstein 48, 01510 Vitoria-Gasteiz, Spain

Funding

Ministerio de Ciencia, Innovación y Universidades

References (28)

Show source-provided references
1. (2021, April 05). Polyurethane Market Size Worth $105.2 Billion by 2025|CAGR: 7.0%. Available online: https://www.grandviewresearch.com/press-release/global-polyurethane-pu-market.
2. Recycling of polyurethanes from laboratory to industry, a journey towards the sustainability10.1016/j.wasman.2018.03.041 ↗
3. Simón, D., Borreguero, A.M., de Lucas, A., Gutiérrez, C., and Rodríguez, J.F. (2014). Sustainable Polyurethanes: Chemical Recycling to Get It, Springer.10.1007/698_2014_275 ↗
4. Degradation and stabilization of polyurethane elastomers10.1016/j.progpolymsci.2018.12.003 ↗
5. Strain effects on thermal transitions and mechanical properties of thermoplastic polyurethane elastomers10.1016/S0040-6031(98)00541-3 ↗
6. A noble additive cum compatibilizer for dispersion of nanoclay into ethylene octene elastomer10.1016/j.clay.2016.02.032 ↗
7. Estimation of material and interfacial/interphase properties in clay/polymer nanocomposites by yield strength data10.1016/j.clay.2015.07.021 ↗
8. Water-Responsive Mechanically Adaptive Nanocomposites Based on Styrene–Butadiene Rubber and Cellulose Nanocrystals—Processing Matters10.1021/am404382x ↗
9. Swellable elastomeric HNBR–MgO composite: Magnesium oxide as a novel swelling and reinforcement filler10.1016/j.compscitech.2014.05.002 ↗
10. Thermal insulation capability of PEG-containing polyurethane foams10.1016/j.tca.2008.06.006 ↗
11. Quantitative evaluation of mattresses using a thermal seat tester10.1080/00405000.2019.1598315 ↗
12. Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review10.1016/j.rser.2015.09.040 ↗
13. Characterization of rigid polyurethane foams containing microencapsulted phase change materials: Microcapsules type effect10.1002/app.38226 ↗
14. Form-stable phase-change elastomer gels derived from thermoplastic elastomer copolyesters swollen with fatty acids10.1016/j.tca.2020.178566 ↗
15. Improvement of thermal inertia of styrene–ethylene/butylene–styrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs)10.1016/j.eurpolymj.2010.11.004 ↗
16. Thermal properties of shape-stabilized phase change materials based on Low Density Polyethylene, Hexadecane and SEBS for thermal energy storage10.1016/j.applthermaleng.2020.115072 ↗
17. Glycolysis of high resilience flexible polyurethane foams containing polyurethane dispersion polyol10.1016/j.polymdegradstab.2016.08.007 ↗
18. Synthesis, Structure and Properties of Poly(ester-Urethane-Urea)s Synthesized Using Biobased Diamine10.7569/JRM.2015.634130 ↗
19. Valorization of crude glycerol as a novel transesterification agent in the glycolysis of polyurethane foam waste10.1016/j.polymdegradstab.2015.09.001 ↗
20. PU elastomers comprising spherical nanosilicas: Balancing rheology and properties10.1016/j.polymer.2014.09.065 ↗
21. Effect of clay loading on the structural and mechanical properties of organoclay/HDI-based thermoplastic polyurethane nanocomposites10.1515/epoly-2015-0130 ↗
22. Prisacariu, C. (2011). Polyurethane Elastomers From Morphology to Mechanical Aspects, Springer.10.1007/978-3-7091-0514-6 ↗
23. Influence of the particle size and the filling degree of barium titanate filled silicone elastomers used as potential dielectric elastomers on the mechanical properties and the crosslinking density10.1016/j.mtcomm.2017.12.013 ↗
24. The role of microstructure on the mechanical properties of polyurethane foams containing thermoregulating microcapsules10.1016/j.polymertesting.2017.04.011 ↗
25. Synthesis and characterization of chitin/curcumin blended polyurethane elastomers10.1016/j.ijbiomac.2018.01.031 ↗
26. Reactivity of isocyanates with urethanes: Conditions for allophanate formation10.1016/j.polymdegradstab.2005.01.045 ↗
27. The effect of free isocyanate content on properties of one component urethane adhesive10.1016/j.ijadhadh.2014.02.012 ↗
28. Evidences of phase separation in moisture-cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry10.1002/polb.21298 ↗