journal article·2021-06-28Open access

Bioinspired Divide-and-Conquer Design Methodology for a Multifunctional Contour of a Curved Lever

Jehyeok Kim, Junyoung Moon, Jaewook Ryu, Giuk Lee

Applied Sciences· Volume 11· Issue 13

Abstract

In this study, we propose a bioinspired design methodology for a multifunctional lever based on the morphological principle of the lever mechanism in the Salvia pratensis flower. The proposed divide-and-conquer contour design methodology does not treat a lever contour as a single curve that satisfies multiple functions. Rather, the lever contour combines partial contours to achieve its assigned subfunction. This approach can simplify the complex multifunctional problem in lever design. We include a case study of a lever utilized in a compact variable gravity compensator (CVGC) to explain the methodology in more detail. In the case study, four partial contours were designed to satisfy three types of functional requirements. The final design for the lever contour was manufactured and verified with visual measurement experiments. The experimental result shows that each partial contour successfully achieved its subfunctions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Vision and Imaging · Robotic Mechanisms and Dynamics · Mechanics and Biomechanics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Chung-Ang University, Seoul 06974, Korea

Funding

Samsung Research Funding & Incubation Center of Samsung Electronics · Chung-Ang University Research Grants

References (17)

Show source-provided references
1. Lin, H., and Fang, W. (2000, January 21–24). Torsional mirror with an electrostatically driven lever-mechanism. Proceedings of the 2000 IEEE/LEOS International Conference on Optical MEMS, Kauai, HI, USA.
2. Physiological evaluation of a newly designed lever mechanism for wheelchairs10.3109/03091909309006331 ↗
3. Lever mechanism for vibration isolation10.15208/ati.2010.3 ↗
4. Shi, C., Dong, X., and Yang, Z. (2021). A Microgripper with a Large Magnification Ratio and a High Structural Stiffness Based on a Flexure-Enabled Mechanism. IEEE/ASME Trans. Mechatron., early access.10.1109/TMECH.2021.3052806 ↗
5. The design and characterization of a piezo-driven inchworm linear motor with a reduction-lever mechanism10.1299/jsmec.47.803 ↗
6. The spring-and-lever balancing mechanism, George Carwardine and the Anglepoise lamp10.1243/0954406001523137 ↗
7. A new actuator with adjustable stiffness based on a variable ratio lever mechanism10.1109/TMECH.2012.2218615 ↗
8. Tsagarakis, N.G., Sardellitti, I., and Caldwell, D.G. (2011, January 25–30). A new variable stiffness actuator (CompAct-VSA): Design and modelling. Proceedings of the 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems, San Francisco, CA, USA.10.1109/IROS.2011.6095006 ↗
9. Kim, B., and Song, J. (2010, January 3–7). Hybrid dual actuator unit: A design of a variable stiffness actuator based on an adjustable moment arm mechanism. Proceedings of the 2010 IEEE International Conference on Robotics and Automation, Anchorage, AK, USA.
10. A novel design of serial variable stiffness actuator based on an archimedean spiral relocation mechanism10.1109/TMECH.2018.2854742 ↗
11. The Variable Stiffness Actuator vsaUT-II: Mechanical Design, Modeling, and Identification10.1109/TMECH.2013.2251894 ↗
12. Barrett, E., Fumagalli, M., and Carloni, R. (2016, January 9–14). Elastic Energy Storage in Leaf Springs for a Lever-Arm Based Variable Stiffness Actuator. Proceedings of the 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Daejeon, Korea.10.1109/IROS.2016.7759105 ↗
13. Kim, J., Moon, J., Kim, J., and Lee, G. (2019, January 3–8). Design of Compact Variable Gravity Compensator (CVGC) Based on Cam and Variable Pivot of a Lever Mechanism. Proceedings of the 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Macau, China.10.1109/IROS40897.2019.8967609 ↗
14. Dežman, M., and Gams, A. (2017, January 3–7). Pseudo-linear variable lever variable stiffness actuator: Design and evaluation. Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Munich, Germany.10.1109/AIM.2017.8014113 ↗
15. Compact Variable Gravity Compensation Mechanism with a Geometrically Optimized Lever for Maximizing Variable Ratio of Torque Generation10.1109/TMECH.2020.2998291 ↗
16. Kim, J., Moon, J., Ryu, J., and Lee, G. CVGC-II: A new version of a compact variable gravity compensator (CVGC) with a wider range of variable torque and an energy-free variable mechanism. IEEE Trans. Mechatron., accepted.
17. New insights into the functional morphology of the lever mechanism of Salvia pratensis (Lamiaceae)10.1093/aob/mcm031 ↗