journal article·2022-02-27Open access

Atomic-Layer-Deposition-Made Very Thin Layer of Al2O3, Improves the Young’s Modulus of Graphene

Aile Tamm, Tauno Kahro, Helle-Mai Piirsoo, Taivo Jõgiaas

Applied Sciences· Volume 12· Issue 5

Abstract

Nanostructures with graphene make them highly promising for nanoelectronics, memristor devices, nanosensors and electrodes for energy storage. In some devices the mechanical properties of graphene are important. Therefore, nanoindentation has been used to measure the mechanical properties of polycrystalline graphene in a nanostructure containing metal oxide and graphene. In this study the graphene was transferred, prior to the deposition of the metal oxide overlayers, to the Si/SiO2 substrate were SiO2 thickness was 300 nm. The atomic layer deposition (ALD) process for making a very thin film of Al2O3 (thickness comparable with graphene) was applied to improve the elasticity of graphene. For the alumina film the Al(CH3)3 and H2O were used as the precursors. According to the micro-Raman analysis, after the Al2O3 deposition process, the G-and 2D-bands of graphene slightly broadened but the overall quality did not change (D-band was mostly absent). The chosen process did not decrease the graphene quality and the improvement in elastic modulus is significant. In case the load was 10 mN, the Young’s modulus of Si/SiO2/Graphene nanostructure was 96 GPa and after 5 ALD cycles of Al2O3 on graphene (Si/SiO2/Graphene/Al2O3) it increased up to 125 GPa. Our work highlights the correlation between nanoindentation and defects appearance in graphene.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Graphene research and applications · Semiconductor materials and devices · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Physics, University of Tartu, 50411 Tartu, Estonia

Funding

Estonian Research Council · European Regional Development Fund project ''Emerging orders in quantum and nanomaterials'' (TK134)

References (29)

Show source-provided references
1. Ali, M.M., Mitchell, J.J., Burwell, G., Rejnhard, K., Jenkins, C.A., Ahmadi, E.D., Sharma, S., and Guy, O.J. (2021). Application of Molecular Vapour Deposited Al2O3 for Graphene-Based Biosensor Passivation and Improvements in Graphene Device Homogeneity. Nanomaterials, 11.10.3390/nano11082121 ↗
2. Evaluating gas permeance through graphene nanopores and porous 2D-membranes: A generalized approach10.1016/j.cartre.2021.100086 ↗
3. Kodu, M., Berholts, A., Kahro, T., Eriksson, J., Yakimova, R., Avarmaa, T., Renge, I., Alles, H., and Jaaniso, R. (2019). Graphene-Based Ammonia Sensors Functionalised with Sub-Monolayer V2O5: A Comparative Study of Chemical Vapour Deposited and Epitaxial Graphene. Sensors, 19.10.3390/s19040951 ↗
4. Graphene balls for lithium rechargeable batteries with fast charging and high volumetric energy densities10.1038/s41467-017-01823-7 ↗
5. Enhanced oxygen reduction reaction activity and durability of Pt nanoparticles deposited on graphene-coated alumina nanofibres10.1039/D1NA00007A ↗
6. Graphene Field-Effect Transistors with High On/Off Current Ratio and Large Transport Band Gap at Room Temperature10.1021/nl9039636 ↗
7. Hafnium Oxide/Graphene/Hafnium Oxide-Stacked Nanostructures as Resistive Switching Media10.1021/acsanm.1c00587 ↗
8. Structure and behavior of ZrO2-graphene-ZrO2 stacks10.1116/6.0000390 ↗
9. Disorder-free sputtering method on graphene10.1063/1.4739783 ↗
10. Atomic Layer Deposition for Graphene Device Integration10.1002/admi.201700232 ↗
11. Atomic layer deposition of ZrO2 for graphene-based multilayer structures: In situ and ex situ characterization of growth process10.1002/pssa.201330106 ↗
12. Jõgiaas, T., Tarre, A., Mändar, H., Kozlova, J., and Tamm, A. (2022). Nanoindentation of Chromium Oxide Possessing Superior Hardness among Atomic-Layer-Deposited Oxides. Nanomaterials, 12.10.3390/nano12010082 ↗
13. Measurements of mechanical properties and number of layers of graphene from nano-indentation10.1016/j.diamond.2012.01.033 ↗
14. Elastic, plastic, and fracture mechanisms in graphene materials10.1088/0953-8984/27/37/373002 ↗
15. Rabiei, M., Palevicius, A., Dashti, A., Nasiri, S., Monshi, A., Vilkauskas, A., and Janusas, G. (2020). Measurement Modulus of Elasticity Related to the Atomic Density of Planes in Unit Cell of Crystal Lattices. Materials, 13.10.3390/ma13194380 ↗
16. Rabiei, M., Palevicius, A., Nasiri, S., Dashti, A., Vilkauskas, A., and Janusas, G. (2021). Relationship between Young’s Modulus and Planar Density of Unit Cell, Super Cells (2 × 2 × 2), Symmetry Cells of Perovskite (CaTiO3). Lattice Mater., 14.10.3390/ma14051258 ↗
17. Tensile mechanical characteristics and deformation mechanism of metal-graphene nanolayered composites10.1016/j.commatsci.2018.05.004 ↗
18. Thermal relaxation and deformation of indented graphene10.1016/j.commatsci.2013.06.012 ↗
19. Nanoindentation models and Young’s modulus of monolayer graphene: A molecular dynamics study10.1063/1.4793191 ↗
20. Raman characterization of defects and dopants in graphene10.1088/0953-8984/27/8/083002 ↗
21. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
22. Understanding and controlling the substrate effect on graphene electron-transfer chemistry via reactivity imprint lithography10.1038/nchem.1421 ↗
23. Raman spectroscopy as probe of nanometre-scale strain variations in graphene10.1038/ncomms9429 ↗
24. Modulation of electron transfer in Si/SiO2/HfO2/Graphene by the HfO2 thickness10.1007/s00339-020-03935-2 ↗
25. On the failure load and mechanism of polycrystalline graphene by nanoindentation10.1038/srep07437 ↗
26. High-Strength Chemical-Vapor–Deposited Graphene and Grain Boundaries10.1126/science.1235126 ↗
27. Formation of atomic carbon chains from graphene nanoribbons10.1103/PhysRevB.81.201406 ↗
28. Carbon xerogel from 5-methylresorcinol-formaldehyde gel: The controllability of structural properties10.1016/j.cartre.2021.100037 ↗
29. Tamm, A., Piirsoo, H.-M., Jõgiaas, T., Tarre, T., Link, J., Stern, R., and Kukli, K. (2021). Mechanical and Magnetic Properties of Double Layered Nanostructures of Tin and Zirconium Oxides Grown by Atomic Layer Deposition. Nanomaterials, 11.10.3390/nano11071633 ↗