Nonlinear Dynamics of Vibro-Impacting Indenter
Source abstract
Abstract
We investigated a vibro-impacting indenter interacting with strata in the form of metal or rock samples experimentally and via mathematical modelling. An experimental programme was undertaken on the custom-designed rig at the Centre for Applied Dynamics of the University of Aberdeen. The mathematical models captured the essential mechanics when the indenter interacted with the metal or rock samples. The mathematical functions describing the discontinuous phases were specific to the metal and rock samples. Appropriate switch functions were constructed for indenter positions, as well as for the penetration depth, wherever appropriate. To seek a correlation between the experiments and modelling, a careful direct numerical integration of the equations of motion describing each discontinuous phase of the system dynamic response enabled time histories, phase trajectories and amplitude spectra to be computed. The developed mathematical model facilitates the optimisation of vibro-impact dynamical responses.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Force Microscopy Techniques and Applications · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Intelligent Manufacturing Ecosystem, Xi’an Jiaotong-Liverpool University, Suzhou 215123, China
Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Malaysia, Semenyih 43500, Selangor Darul Ehsan, Malaysia
Centre for Applied Dynamics Research, School of Engineering, University of Aberdeen, Aberdeen AB24 3FX, UK
References (28)
Show source-provided references
1. Dynamic modeling and simulation of impact in hydraulic cylinders
2. Analysis of stator vibration response for the diagnosis of rub in a coupled rotor-stator system10.1016/j.ijmecsci.2018.05.019 ↗
3. Migliniene, I., Ostasevicius, V., Gaidys, R., Dauksevicius, R., Janusas, G., Jurenas, V., and Krasauskas, P. (2017). Rational design approach for enhancing higher-mode response of a microcantilever in vibro-impacting mode. Sensors, 17.10.3390/s17122884 ↗
4. Dynamics of two impacting beams with clearance nonlinearity10.1016/j.proeng.2017.09.101 ↗
5. Experimental study of regular and chaotic transients in a non-smooth system10.1016/j.ijnonlinmec.2015.12.006 ↗
6. Wang, Y., and Huang, J. (July, January 29). Dynamic analysis for a two-shaft rotor system under a sudden loss of mass excitation. Proceedings of the World Congress on Engineering, London, UK.
7. Transient dynamic behaviour of finite element tire traversing obstacles with different heights10.1016/j.jterra.2014.07.001 ↗
8. Wilcox, B., Dankowicz, H., and Lacarbonara, W. (September, January 30). Response of Electrostatically Actuated Flexible MEMS Structures to the Onset of Low-Velocity Contact. Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, CA, USA.
9. Feature-based intelligent models for optimisation of percussive drilling10.1016/j.neunet.2022.01.021 ↗
10. Research on impact stress transfer characteristics of lunar rock coring drill10.1155/2021/1555295 ↗
11. 3D numerical modelling of thermal shock assisted percussive drilling10.1016/j.compgeo.2020.103849 ↗
12. Thermal shock assisted percussive drilling: A numerical study on the single-bit axisymmetric case10.1016/j.ijrmms.2020.104365 ↗
13. Mathematical model of piston-tool interaction in rock fracture by impact10.25018/0236-1493-2020-7-0-94-103 ↗
14. Prediction model of drilling performance for percussive rock drilling tool10.1155/2020/8865684 ↗
15. Song, X., Aamo, O.M., Kane, P.A., Depouhon, A., and Detournay, E. (July, January 28). Theoretical investigation of percussive drilling and drop test. Proceedings of the 54th U.S. Rock Mechanics/Geomechanics Symposium, Golden, CO, USA.
16. The percussive process and energy transfer efficiency of percussive drilling with consideration of rock damage10.1016/j.ijrmms.2019.04.012 ↗
17. Rock breaking mechanism in percussive drilling with the effect of high-frequency torsional vibration10.1080/15567036.2019.1650138 ↗
18. Scaccabarozzi, D., and Saggin, B. (2021). Measurement of stress waves propagation in percussive drilling. Sensors, 21.10.3390/s21113677 ↗
19. Determination of efficient rotary percussive drilling techniques for strong rocks10.1134/S1062739121030108 ↗
20. Ding, Y., Tan, Z., and Li, S. (2020, January 21–23). Experimental research on rotation-rercussion drilling of diamond bit based on stress wave. Proceedings of the IOP Conference Series: Earth and Environmental Science, Changchun, China.10.1088/1755-1315/558/3/032005 ↗
21. Nonlinear dynamics of a vibro-impact system for indenter-rock interaction. (In Chinese)10.3901/JME.2020.21.121 ↗
22. Study on perforation performance of abrasive water jet enhanced by percussive drilling10.1016/j.petrol.2020.107259 ↗
23. Analysis on the mechanical properties of granite rock near the wellbore after percussive drilling and AWJ perforation10.1016/j.petrol.2019.106489 ↗
24. Multi-fractured stimulation technique of hydraulic fracturing assisted by the DTH-hammer-induced impact fractures10.1016/j.geothermics.2019.05.016 ↗
25. Wiercigroch, M. (2016). Resonance Enhanced Drilling: Method and Apparatus. (EP2230375B12007).
26. Experimental verification of the percussive drilling model10.1016/j.ymssp.2020.107067 ↗
27. Dynamic method of stiffness identification in impacting systems for percussive drilling applications10.1016/j.ymssp.2016.04.021 ↗
28. Modelling of high-frequency vibro-impact drilling10.1016/j.ijmecsci.2013.08.009 ↗