journal article·2023-04

The Multi-field Coupled Vibration Analysis of AT-Cut Quartz Crystal Resonators with Parallelism Error

Mengjie Li, Nian Li, Peng Li, Dianzi Liu, Iren E. Kuznetsova, Zhenghua Qian, Tingfeng Ma

Acta Mechanica Solida Sinica· Volume 36· Issue 2
Publisher page

Abstract

During the fabrication of quartz crystal resonators (QCRs), parallelism error is inevitably generated, which is rarely investigated. In order to reveal the influence of parallelism error on the working performance of QCRs, the coupled vibration of a non-parallel AT-cut quartz crystal plate with electrodes is systematically studied from the views of theoretical analysis and numerical simulations. The two-dimensional thermal incremental field equations are solved for the free vibration analysis via the coefficient-formed partial differential equation module of the COMSOL Multiphysics software, from which the frequency spectra, frequency–temperature curves, and mode shapes are discussed in detail. Additionally, the piezoelectric module is utilized to obtain the admittance response under different conditions. It is demonstrated that the parallelism error reduces the resonant frequency. Additionally, symmetry broken by the non-parallelism increases the probability of activity dip and is harmful to QCR’s thermal stability. However, if the top and bottom surfaces incline synchronously in the same direction, the influence of parallelism error is tiny. The conclusions achieved are helpful for the QCR design, and the methodology presented can also be applied to other wave devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Microwave Engineering and Waveguides · Advanced MEMS and NEMS Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Shockley W, Curran DR, Koneval DJ. Trapped-energy modes in quartz filter crystals. J Acoust Soc Am. 1967;41(4B):981–93.10.1121/1.1910453 ↗
2. Tiersten HF. Analysis of overtone modes in monolithic crystal filters. J Acoust Soc Am. 1977;62(6):1424–30.10.1121/1.381659 ↗
3. He HJ, Liu JX, Yang JS. Analysis of a monolithic crystal plate acoustic wave filter. Ultrason. 2011;51(8):991–6.10.1016/j.ultras.2011.05.015 ↗
4. Xie JM, Hu YT. A two-dimensional model on the coupling thickness-shear vibrations of a quartz crystal resonator loaded by an array spherical-cap viscoelastic material units. Ultrason. 2016;71(2):194–8.10.1016/j.ultras.2016.05.026 ↗
5. Zhao ZN, Qian ZH, Wang B. Thickness-shear vibration of a Z-strip AT-cut quartz crystal plate with nonuniform electrode pairs. Ferroelectr. 2017;506(1):48–62.10.1080/00150193.2017.1281696 ↗
6. Mindlin RD. Thickness-shear and flexural vibrations of crystal plates. J Appl Phys. 2008;22(3):316–23.10.1063/1.1699948 ↗
7. Wang JN, Hu YT, Yang JS. Frequency spectra of AT-cut quartz plates with electrodes of unequal thickness. IEEE Trans Ultrason Ferroelectr Freq Control. 2010;57(5):1146–51.10.1109/TUFFC.2010.1526 ↗
8. Chen GJ, Wu RX, Wang J, Du JK, Yang JS. Five-mode frequency spectra of x3-dependent modes in AT-cut quartz resonators. IEEE Trans Ultrason Ferroelectr Freq Control. 2012;59(4):811–6.10.1109/TUFFC.2012.2259 ↗
9. Li N, Wang B, Qian ZH. Coupling vibration analysis of trapped-energy rectangular quartz resonators by variational formulation of Mindlin’s theory. Sensors. 2018;18(4):986.10.3390/s18040986 ↗
10. Mindlin RD, Spencer WJ. Anharmonic, thickness-twist overtones of thickness-shear and flexural vibrations of rectangular, AT-cut quartz plates. J Acoust Soc Am. 1967;42(6):1268–77.10.1121/1.1910716 ↗
11. Goka S, Ishizaki A, Sekimoto H, Watanabe Y. Effect of stepped bi-mesa structures on spurious vibrations of AT-cut quartz plates. Jpn J Appl Phys. 2000;39(5B):3054–5.10.1143/JJAP.39.3054 ↗
12. Goka S, Tamura T, Sekimoto H, Watanabe Y, Sato T, Sato K. Mode decoupling effect of multistepped bi-mesa AT-cut quartz resonators. Jpn J Appl Phys. 2004;43(5B):3016–9.10.1143/JJAP.43.3016 ↗
13. Ma TF, Wang J, Du JK, Yang JS. Resonances and energy trapping in AT-cut quartz resonators operating with fast shear modes driven by lateral electric fields produced by surface electrodes. Ultrason. 2015;59:14–20.10.1016/j.ultras.2015.01.004 ↗
14. Zaitsev BD, Shikhabudinov AM, Borodina IA, Teplykh AA, Kuznetsova IE. Composite lateral electric field excited piezoelectric resonator. Ultrason. 2017;73:125–9.10.1016/j.ultras.2016.08.022 ↗
15. Tiersten HF. Temperature dependence of the resonant frequency of electroded doubly-rotated quartz thickness-mode resonators. J Appl Phys. 1979;50(12):8038–51.10.1063/1.325940 ↗
16. Lee PCY, Yong YK. Frequency-temperature behavior of thickness vibrations of doubly rotated quartz plates affected by plate dimensions and orientations. J Appl Phys. 1986;60(7):2327–42.10.1063/1.337143 ↗
17. Lee PCY, Yong YK. Temperature derivatives of elastic stiffness derived from the frequency–temperature behavior of quartz plates. J Appl Phys. 1984;56(5):1514–21.10.1063/1.334107 ↗
18. Yang JS. Equations for small fields superposed on finite biasing fields in a thermoelectroelastic body. IEEE Trans Ultrason Ferroelectr Freq Control. 2003;50(2):187–92.10.1109/TUFFC.2003.1182122 ↗
19. Wang J. The frequency-temperature analysis equations of piezoelectric plates with Lee plate theory. IEEE Trans Ultrason Ferroelectr Freq Control. 1999;46(4):1042–6.10.1109/58.775672 ↗
20. Yong YK, Vig J, Ballato A, Kubena R, M'Closkey R. Frequency-temperature analysis of MEMS AT-cut quartz resonators. In: Proceedings of the IEEE international frequency control symposium, Tampa, FL, USA. 2003. p. 1095–1099.10.1109/FREQ.2003.1275244 ↗
21. Matko V. Multiple quartz crystals connected in parallel for high-resolution sensing of capacitance changes. Sensors. 2022;22(13):5030.10.3390/s22135030 ↗
22. Naumenko NF. Temperature behavior of SAW resonators based on LiNbO3/quartz and LiTaO3/quartz substrates. IEEE Trans Ultrason Ferroelectr Freq Control. 2021;68(11):3430–7.10.1109/TUFFC.2021.3089481 ↗
23. Wang YH, Qin ZK, Wang CX. Effects of manufacturing errors on the characteristics of a polymer vertical coupling microring resonator. J Semicond. 2012;33(10): 104007.10.1088/1674-4926/33/10/104007 ↗
24. Huang JY, Zhao Y, Xia GM, Shi Q, Qiu AP. Accurate identification of the evolution of MEMS resonant accelerometer residual stresses at the wafer-die-chip level. J Microelectromech Syst. 2022;31(4):524–32.10.1109/JMEMS.2022.3168703 ↗
25. Pentovelis G, Boudy C, Jeannerot V. Influence of wafer symmetry on the dynamic parameters of rectangular plates. In: Proceedings of the IEEE international frequency control symposium 1999. p. 453–456.10.1109/FREQ.1999.840804 ↗
26. Tay FEH, Xu J, Liang LC, Logeeswaran VJ, Yao YF. The effects of non-parallel plates in a differential capacitive microaccelerometer. J Micromech Microeng. 1999;9(4):283–93.10.1088/0960-1317/9/4/301 ↗
27. Dong LX, Che LF, Sun LG, Wang YL. Effects of non-parallel combs on reliable operation conditions of capacitive inertial sensor for step and shock signals. Sensor Actuat A-Phys. 2005;121(2):395–404.10.1016/j.sna.2005.03.048 ↗
28. Yong YK, Wei W. Lagrangian temperature coefficients of the piezoelectric stress constants and dielectric permittivity of quartz. In: Proceedings of the IEEE international frequency control symposium 2000. p. 364–372.
29. Zhang J, Cai L. Interferometric straightness measurement system using triangular prisms. Opt Eng. 1998;37(6):1785–9.10.1117/1.601696 ↗
30. Vannoni M, Molesini G. Paired interferometric measurement of planarity and parallelism. In: Proceedings of the Optical Measurement Systems 2003; p. 864–87110.1117/12.501263 ↗
31. Tiersten HF. Linear piezoelectric plate vibrations. New York: Plenum Press; 1969.10.1007/978-1-4899-6453-3 ↗
32. Kosinski JA. Thickness vibrations of flat piezoelectric plates with massy electrodes of unequal thickness. IEEE Ultrasonics Symp. 2005;1(1):70–3.
33. Liu N, Yang JS, Chen WQ. Effects of a mass layer with gradually varying thickness on a quartz crystal microbalance. IEEE Sensors J. 2011;11(8):1635–9.10.1109/JSEN.2010.2103360 ↗
34. Gu CL, Li P, Jin F, Chen GF, Ma LS. Effects of the imperfect interface and viscoelastic loading on vibration characteristics of a quartz crystal microbalance. Acta Mech. 2018;229(7):2967–77.10.1007/s00707-018-2155-x ↗
35. Yang JS. The mechanics of piezoelectric structures. Singapore: World Scientific; 2006.10.1142/6057 ↗
36. Bechmann R, Ballato AD, Lukaszek TJ. Frequency-temperature behavior of thickness modes of double-rotated quartz plates. In: Proceedings of the IEEE Symposium on Frequency Control. 1961. p. 22–48.10.1109/FREQ.1961.199468 ↗
37. Bechmann R, Ballato AD, Lukaszek TJ. Frequency-temperature characteristics of quartz resonators derived from the temperature behavior of the elastic constants. In: Proceedings of the IEEE Symposium on Frequency Control 1962. p. 77–109.10.1109/FREQ.1962.199500 ↗
38. Yong YK, Wei W. Lagrangean versus classical formulation of frequency-temperature problems in quartz resonators. In: Proceedings of the IEEE international frequency control symposium 2001. p. 828–837.
39. Li N, Qian ZH, Wang B. Forced coupling vibration analysis of FBAR based on two-dimensional equations associated with state-vector approach. AIP Adv. 2018;8(9):095306.10.1063/1.5046533 ↗
40. Li N, Wang B, Qian ZH. Effects of mode couplings on the vibration characteristics of partially electroded thin-film bulk acoustic wave resonators. AIP Adv. 2019;9(6):065203.10.1063/1.5092541 ↗
41. He HJ, Yang JS, Zhang WP, Wang J. Effects of mode coupling on the admittance of an AT-cut quartz thickness-shear resonator. Chin Phys B. 2013;22(4):476–81.10.1088/1674-1056/22/4/047702 ↗
42. Yang JS, Zhang X. Vibrations of a crystal plate under a thermal bias. J Therm Stresses. 2003;26(5):467–77.10.1080/713855936 ↗
43. Yong YK, Patel M, Tanaka M. Effects of thermal stresses on the frequency-temperature behavior of piezoelectric resonators. J Therm Stresses. 2007;30(6):639–61.10.1080/01495730701274252 ↗
44. Shen Q, Yang J, Xie JB, Ren S, Yuan WZ. An enhanced high-sensitivity micro resonant thermometer with axial strain amplification effect. In: Proceedings of the IEEE international nanoelectronics conference 2018. p. 23–24.10.1109/INEC.2018.8441931 ↗
45. Ballato A, Tilton R. Electronic activity dip measurement. IEEE Trans Instrum Meas. 1978;27(1):59–65.10.1109/TIM.1978.4314618 ↗