Design and Experiments of an Origami-Inspired Pneumatic Flexible Manipulator
Source abstract
Abstract
Unlike traditional manipulators with high rigidity and limited degrees of freedom, pneumatic manipulators have significant superiorities such as flexibility, lightweight and cleanliness, and therefore, have been one of the most popular research directions in robotics. However, most existing pneumatic manipulators have disadvantages such as low rigidity and simple functionality. In order to make up for the shortcomings of existing pneumatic manipulators, this paper proposes a new pneumatic flexible manipulator inspired by the concept of origami, which realizes the combination and balance of flexibility and rigidity. Finite element analysis is conducted to study influences of the number of airbags, the angle of main beam, and the width of main beam on the performance of the flexible manipulator. The simulation results are utilized to optimize the structure of the flexible manipulator. A pneumatic control system is designed to realize the automatic control of the pneumatic flexible manipulator. At the same time, a prototype is 3D printed, the experimental platform for pneumatic deformation is built, and the verification experiments of the single-jaw manipulator and the three-jaw manipulator are completed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Soft Robotics and Applications · Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Salem ME, Wang Q, Wen R, Xiang M. Design and characterization of soft pneumatic actuator for universal robot gripper. In: 2018 international conference on control and robots (ICCR). IEEE; 2018. p. 6–10.10.1109/ICCR.2018.8534483 ↗
2. Elango N, Faudzi AAM. A review article: investigations on soft materials for soft robot manipulations. Int J Adv Manuf Technol. 2015;80(5):1027–37.10.1007/s00170-015-7085-3 ↗
3. Asaka K, Okuzaki H. Soft actuators. Singapore: Springer; 2012.
4. Xu H, Chai G, Zhang N, Gu G. Restoring finger-specific tactile sensations with a sensory soft neuroprosthetic hand through electrotactile stimulation. Soft Science. 2022;2(4):19.10.20517/ss.2022.17 ↗
5. Demaine E. Origami, linkages, and polyhedra: folding with algorithms, Algorithms–ESA; 2006.10.1017/CBO9780511735172 ↗
6. Vaccaro PO, Kubota K, Fleischmann T, Saravanan S, Aida T. Valley-fold and mountain-fold in the micro-origami technique. Microelectron J. 2003;34(5–8):447–9.10.1016/S0026-2692(03)00070-3 ↗
7. Lee D-Y, Jung G-P, Sin M-K, Ahn S-H, Cho K-J. Deformable wheel robot based on origami structure. In: 2013 IEEE international conference on robotics and automation (ICRA); May 2013. p. 5612–7.10.1109/ICRA.2013.6631383 ↗
8. Schenk M, Guest SD. Origami folding: a structural engineering approach. In: Origami 5: fifth international meeting of origami science, mathematics, and education (5OSME); 2011. p. 291–303.
9. Hawkes E, An B, Benbernou N, Tanaka H, Kim S, Demaine E, Rus D, Wood R. Programmable matter by folding. Proc Natl Acad Sci. 2010;107(28):12441.10.1073/pnas.0914069107 ↗
10. Martinez RV, Fish CR, Chen X, Whitesides GM. Elastomeric origami: programmable paper-elastomer composites as pneumatic actuators. Adv Func Mater. 2012;22:1376–84.10.1002/adfm.201102978 ↗
11. Onal CD, Wood RJ, Rus D. Towards printable robotics: origami-inspired planar fabrication of three-dimensional mechanisms. In: Proceedings on IEEE international conference on robotics and automation; 2011. p. 4608–13.10.1109/ICRA.2011.5980139 ↗
12. Evans TA, Lang RJ, Magleby SP, Howell LL. Rigidly foldable origami gadgets and tessellations. R Soc Open Sci. 2015;2(9):150067.10.1098/rsos.150067 ↗
13. Fei LJ, Sujan D. Origami theory and its applications: a literature review. Int J Soc Behav Educ Econ Manag Eng. 2013;7(1):113–7.
14. Morris E, McAdams DA, Malak R. The state of the art of origami-inspired products: a review. In: 2016 international design engineering technical conferences and computers and information in engineering conference, Charlotte, NC, USA. ASME; 2016.10.1115/DETC2016-59629 ↗
15. Zhakypov Z, Heremans F, Billard A, Paik J. An origami-inspired reconfigurable suction gripper for picking objects with variable shape and size. IEEE Robot Autom Lett. 2018;3(4):2894–901.10.1109/LRA.2018.2847403 ↗
16. Wang C, Guo H, Liu R, Yang H, Deng Z. A programmable origami-inspired webbed gripper. Smart Mater Struct. 2021;30:5.
17. Guo QF, He X, Wang Z, et al. Effects of wing flexibility on aerodynamic performance of an aircraft model. Chin J Aeronaut. 2021;34(9):133–42.10.1016/j.cja.2021.01.012 ↗
18. Shapiro Y, Wolf A, Gabor K. Bi-bellows: pneumatic bending actuator. Sens Actuators A. 2011;167(2):484–94.10.1016/j.sna.2011.03.008 ↗
19. Walker J, Zidek T, Harbel C, Yoon S, Strickland FS, Kumar S, Shin M. Soft robotics: a review of recent developments of pneumatic soft actuators. Actuators. 2020;9:3.10.3390/act9010003 ↗
20. Zhang Z, Lei H, Xu M, Hua J, Li C, Fang D. Out-of-plane compressive performance and energy absorption of multi-layer graded sinusoidal corrugated sandwich panels. Mater Des. 2019;178: 107858.10.1016/j.matdes.2019.107858 ↗
21. Xavier MS, Fleming AJ, Yong YK. Image-guided locomotion of a pneumatic-driven peristaltic soft robot. In: Proceedings on IEEE international conference on robotics and biomimetics (ROBIO); 2019. p. 2269–74.10.1109/ROBIO49542.2019.8961406 ↗
22. Suresh A, Udupa G, Gaba D. Design and development of soft robotic hand for vertical farming in spacecraft. Int J Robot Autom. 2020;9(1):6–16.