journal article·2008-08

Study on Drilling Characteristics and Mechanical Properties of CFRP Composites

Seung-Chul Lee, Seong-Taek Jeong, Jong-Nam Park, Sun-Jin Kim, Gyu-Jae Cho

Acta Mechanica Solida Sinica· Volume 21· Issue 4
Publisher page

Abstract

Abstract Stacking plates of CFRP composite materials are increasingly used because of their unique characteristics. However, unlike other materials used in metallurgy they have a disadvantage of uneven quality and anisotropy when combined with other composites. Hence, specimens of CFRP stacking plates are manufactured by changing orientation angles throughout three quasi-isotropic plies (0°/45°/90°/−45°)6s, (03°/453°/903°/−453°)2s, and (06°/456°/906°/−456°)s and throughout three cross plies (0°/90°/0°/90°)6s, (03°/903°/03°/903°)2s, and (06°/906°/06°/906°)s. In this study 3-point bending tests and transverse bending tests have been carried out in order to find out mechanical characteristics according to orientation angles by stacking in 6 different types along with the change of stacking composition method of a CFRP composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Malick, P.K., Fiber-Reinforced Composites, Marcel Dekker, Inc., 1988, 3–4.
2. Jcantwell, W.J. and Morton, J., Detection of impact damage in CFRP laminates. Composites Structures, 1985, 3: 241–257.10.1016/0263-8223(85)90056-X ↗
3. Reugg, C. and Habermeir, J., Composite propeller shaft Design and optimization advances in composite material. Advances in Composite Material Processings of ICCM 3, 1980, 2: 1740–1755.10.1016/B978-1-4832-8370-8.50139-X ↗
4. Ramulu, M. and Arola, D., The Influence of abrasive waterjet cutting conditions on the surface quality of graphite/epoxy laminates. International Journal of Machine Tools and Manufacture, 1994, 34: 295–313.10.1016/0890-6955(94)90001-9 ↗
5. Cantwell, W.J. and Morton, J., Residual strength assessment of impact damaged CFRP laminates. Proc. Int. Conf. Post-Failure Analysis of Fiber Reinforced Composites, Dayton, Ohio, July 1985.
6. Caprino, G., Tagliaferri, V. and Covelli, L., Cutting glass fiber reinforce composites using CO2 laser with multimodal-gaussian distribution. International Journal of Machine Tools and Manufacture, 1995, 35: 831–840.10.1016/0890-6955(94)00054-N ↗
7. Koenig, W. and Grass, P., Quality definition and assessment in drilling of fiber reinforced thermosets. Annals of the CIRP, 1989, 38(1): 119–124.10.1016/S0007-8506(07)62665-1 ↗
8. Chen Wen-Chou, Some experimental investigations in the drilling of carbon fiber-reinforced plastics composite laminates. International Journal of Machine Tools and Manufacture, 1997, 37(8): 639–650.
9. Radhakrishnan, T. and Wu, S.M., On-line hole quality evaluation for drilling composite material using dynamic data. Transactions Of the ASME, Journal of Engineering for Industry, 1981, 103: 119–125.10.1115/1.3184452 ↗
10. Koenig, W., Wulf, C., Grass, P. and Willersheid, H., Quality definition and assessment in drilling of fiber reinforced thermosets. Annals of the CIRP, 1985, 34(2): 537–548.10.1016/S0007-8506(07)60186-3 ↗
11. Caprino, G. and Tagliaferri, V., Damage development drilling glass fiber reinforced plastics. International Journal of Machine Tools and Manufacture, 1995, 35(6): 817–829.10.1016/0890-6955(94)00055-O ↗