A Three-Dimensional Dynamic Constitutive Model and Its Finite Element Implementation for NiTi Alloy Based on Irreversible Thermodynamics
Source abstract
Abstract
In the present work, the governing equations based on theory of irreversible thermodynamics is deduced by introducing two internal variables to characterize the phase transformation and finite plastic deformation evolution for NiTi shape memory alloy. Thus a three-dimensional dynamic constitutive model is established by summarizing the governing equations for phase transformation and plastic deformation under high strain rate loading conditions. By adopting a stress compensation algorithm to update the stress tensor, the phenomenological-based constitutive model is embedded into ABAQUS finite element software as user material subroutine with FORTRAN code. Thus the numerical simulation of dynamic responses of NiTi alloy is successfully implemented. The numerical simulation results are in good agreement with the experimental data, validating the feasibility of this proposed model. Comparison between the simulation results and the experimental data indicates that the proposed model can well describe not only the different deformation stages of NiTi alloy but also its constitutive behavior subjected to different high strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Elasticity and Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Tanaka K. A thermomechanical sketch of shape memory effect: one-dimensional tensile behavior. Res Mech. 1986;18:251–63.
2. Liang C, Rogers CA. One-dimensional thermomechanical constitutive relations for shape memory materials. J Intell Mater Syst Struct. 1990;1(2):207–34.10.1177/1045389X9000100205 ↗
3. Brinson LC, Lammering R. Finite element analysis of the behavior of shape memory alloys and their applications. Int J Solids Struct. 1993;30(23):3261–80.10.1016/0020-7683(93)90113-L ↗
4. Boyd JG, Lagoudas DC. A thermodynamical constitutive model for shape memory materials, part I. The monolithic shape memory alloy. Int J Plast. 1996;12(6):805–42.10.1016/S0749-6419(96)00030-7 ↗
5. Lagoudas DC, Bo Z. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part II: material characterization and experimental results for a stable transformation cycle. Int J Eng Sci. 1999;37(9):1141–73.10.1016/S0020-7225(98)00114-1 ↗
6. Auricchio F, Taylor RL. Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior. Comput Methods Appl Mech Eng. 1997;143(1):175–94.10.1016/S0045-7825(96)01147-4 ↗
7. Auricchio F, Taylor RL, Lubliner J. Shape-memory alloys: macromodelling and numerical simulations of the superelastic behavior. Comput Methods Appl Mech Eng. 1997;146(3):281–312.10.1016/S0045-7825(96)01232-7 ↗
8. Lubliner J, Auricchio F. Generalized plasticity and shape memory alloys. Int J Solids Struct. 1996;33(7):991–1003.10.1016/0020-7683(95)00082-8 ↗
9. Kan QH, Kang GZ. Constitutive model for uniaxial transformation ratchetting of super-elastic NiTi shape memory alloy at room temperature. Int J Plast. 2010;26(3):441–65.10.1016/j.ijplas.2009.08.005 ↗
10. Kan QH, Kang GZ, Qian LM. Super-elastic constitutive model considering plasticity and its finite element implementation. Acta Mech Solida Sin. 2010;23(2):95–105.10.1016/S0894-9166(10)60011-0 ↗
11. Patoor E, Eberhardt A, Berveiller M. Micromechanical modelling of superelasticity in shape memory alloys. J Phys IV. 1996;6(C1):C1-277–92.
12. Manchiraju S, Anderson PM. Coupling between martensitic phase transformations and plasticity: a microstructure-based finite element model. Int J Plast. 2010;26(10):1508–26.10.1016/j.ijplas.2010.01.009 ↗
13. Thamburaja P. Constitutive equations for martensitic reorientation and detwinning in shape-memory alloys. J Mech Phys Solids. 2005;53(4):825–56.10.1016/j.jmps.2004.11.004 ↗
14. Gao X, Huang M, Brinson LC. A multivariant micromechanical model for SMAs: part 1. Crystallographic issues for single crystal model. Int J Plast. 2000;16(10–11):1345–69.10.1016/S0749-6419(00)00013-9 ↗
15. Shi X, Zeng X, Chen H. Constitutive model for dynamic response of a NiTi shape memory alloy. Mater Res Express. 2016;3(7):076502.10.1088/2053-1591/3/7/076502 ↗
16. Guijuan H, Zhang K, Huang S. Yield surfaces and plastic low of 45 steel under tension-torsion loading paths. Acta Mech Solida Sin. 2012;25(4):348–60.10.1016/S0894-9166(12)60032-9 ↗
17. Chaboche JL. On some modifications of kinematic hardening to improve the description ofratchetting effects. Int J Plast. 1991;7:661–78.10.1016/0749-6419(91)90050-9 ↗
18. Sia N-N, Wei-Guo G. Superelastic and cyclic response of NiTi SMA at various strain rates and temperatures. Mech Mater. 2006;38(5):463–74.
19. Belyaev S, Razov A, Volkov A, Petrov A. Mechanical properties of titanium nickelide at high strain rate loading. Mater Sci Eng A. 2004;378(1):122–4.10.1016/j.msea.2003.11.059 ↗
20. Gao CY, Liu PH, Zhang LC. An explicit integration algorithm for introducing user-defined thermo-viscoplastic constitutive models in FE simulations. Mater Sci Forum. 2012;697–698:204–7.
21. Xiang-guo Z, Ying S, Ti-xin H, Jun C, Hua-yan C. Dynamic constitutive relation considering thermo viscoplasticity for titanium alloy and experimental verification. J Sichuan Univ (Eng Sci Ed). 2014;46(6):152–7 (in Chinese).