journal article·2018-10

Real-time acoustic emission monitoring of powder mass flow rate for directed energy deposition

Justin Whiting, Adam Springer, Federico Sciammarella

Publisher page

Abstract

In order to ensure a reliable and repeatable additive manufacturing process, the material delivery rate in the directed energy deposition (DED) process requires in situ monitoring and control. This paper demonstrates acoustic emission (AE) sensing as a method of monitoring the flow of powder feedstock in a powder fed DED process. With minimal calibration, this signal closely correlates to the actual mass flow rate. This article describes the fabricated mass flow monitoring system, documents various conditions in which the actual flow rate deviates from its set value, and details situations that highlight the system's utility. While AE mass flow monitoring is not free of concerns, its features make it an attractive measurement technique in the powder-fed DED process. The work presented here highlights the results obtained and illustrates that accurate monitoring of powder flow in real-time regardless of environmental conditions within the build chamber is possible.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Particle Dynamics in Fluid Flows · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A finer modeling approach for numerically predicting single track geometry in two dimensions during laser rapid manufacturing10.1016/j.optlastec.2011.08.026 ↗
2. The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V10.1016/S1359-6462(00)00408-5 ↗
3. Three-dimensional heat transfer analysis of LENSTM process using finite element method10.1007/s00170-009-2024-9 ↗
4. Semi-empirical model of deposit size and porosity in 420 stainless steel and 4140 steel using laser engineered net shaping10.1016/j.jmapro.2015.06.026 ↗
5. An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers10.1016/j.csite.2014.02.002 ↗
6. Freeform fabrication of metallic components using laser engineered net shaping
7. Gas flow rate and powder flow rate effect on properties of laser metal deposited Ti6Al4V
8. Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel10.1016/j.apsusc.2005.01.039 ↗
9. Pore formation in laser-assisted powder deposition process10.1115/1.3184087 ↗
10. Sensing, modeling and control for laser-based additive manufacturing10.1016/S0890-6955(02)00163-3 ↗
11. Development of monitoring and control system for laser remanufacturing
12. Intelligent metal powder laser forming system, knowledge enterprise: intell. strategies in product
13. Design characteristics and development of a nozzle for coaxial laser cladding10.2351/1.521821 ↗
14. Variable powder flow rate control in laser metal deposition processes10.1115/1.2953074 ↗
15. A robust method for drilling monitoring using acoustic emission
16. On-line robust identification of tool-wear via multi-sensor neural-network fusion10.1016/S0952-1976(98)00046-3 ↗
17. Detection of partial discharges in transformers using acoustic emission techniques10.1109/TPAS.1978.354646 ↗
18. Fatigue crack propagation monitoring by acoustic emission signal analysis10.1016/j.engfracmech.2011.09.017 ↗
19. Nondestructive detection of valves using acoustic emission technique
20. The uses of passive measurement of acoustic emissions from chemical engineering processes10.1016/S0009-2509(00)00540-6 ↗
21. Upstream multiphase flow assurance monitoring using acoustic emission
22. Characterization of particle impact by quantitative acoustic emission10.1016/0043-1648(90)90018-6 ↗
23. Powder size measurement by acoustic emission10.1016/j.measurement.2010.10.005 ↗
24. Statistical distribution models for monitoring acoustic emission (AE) energy of abrasive particle impacts on carbon steel10.1016/j.ymssp.2011.12.017 ↗
25. Mass flow rate measurement in abrasive jets using acoustic emission10.1088/0957-0233/20/9/095402 ↗
26. AE monitoring and analysis of HVOF thermal spraying process10.1007/s11666-011-9620-6 ↗
27. The use of acoustic emission instrumentation to monitor powder flows10.1016/0308-9126(81)90056-0 ↗
28. An investigation of the generation of acoustic emission from the flow of particulate solids in pipelines10.1016/j.powtec.2013.03.038 ↗
29. Smoothing and differentiation of data by simplified least squares procedures10.1021/ac60214a047 ↗