Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging
Source abstract
Abstract
Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is prone to inducing detrimental material features such as porosity and residual stresses negatively affecting fatigue resistance and lifetime. Here we apply neutron Bragg edge radiography in a parametric study on printing 316L steel. The parameters concerned are the laser scanning speed and strategy as well as the optional use of support structures. Analyses of the full field single shot wavelength-resolved Bragg edge radiography data enables to characterize local density inhomogeneities, as well as cracks, based on the long wavelength tail of the spectrum and variations of the stress field but also textural features based on the Bragg edge pattern. It is found that in the performed study not only respective differences in the residual stresses due to parameter variation are manifesting but also systematic irregularities due to machine imperfections (e.g. issues with the powder coater) are observed in the printed samples. The study supports the use of the parallel scanning strategy without supports and with the lower utilized scanning speed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Nuclear Physics and Applications · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
2. Additive manufacturing: technology, applications and research needs10.1007/s11465-013-0248-8 ↗
3. Microscale metal additive manufacturing of multi-component medical devices
4. J.-P., Kruth, B., Vandenbroucke, J., Van Vaerenbergh, I., Naert, Rapid manufacturing of dental prostheses by means of selective laser sintering/melting, in: Proceedings of the AFPR S 4, 2005, 176–186.
5. Development of porous medical implant scaffolds via laser additive manufacturing10.1016/S1003-6326(12)61706-3 ↗
6. D., Türk, et al. Additive manufacturing with composites for integrated aircraft structures, in: Proceedings of the International SAMPE Technical Conference, 1404–1418 (Society for the Advancement of Material and Process Engineering, 2016.
7. Laser powder bed fabrication of nickel-base superalloys: influence of parameters; characterisation, quantification and mitigation of cracking10.7449/2012/Superalloys_2012_577_586 ↗
8. C., Semini, et al. Additive manufacturing for agile legged robots with hydraulic actuation, in: Proceedings of the 2015 International Conference on Advanced Robotics (ICAR), 123–129 (IEEE, 2015).10.1109/ICAR.2015.7251444 ↗
9. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
10. Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice10.1016/j.pmatsci.2019.100590 ↗
11. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗
12. Standard test method for determining residual stresses by the hole-drilling strain-gage method, in: Proceedings of the ASTM, E, 837–95, 2008.
13. Cross-sectional mapping of residual stresses by measuring the surface contour after a cut10.1115/1.1345526 ↗
14. Residual stress measurement by successive extension of a slot: the crack compliance method10.1115/1.3098926 ↗
15. Diffraction in neutron imaging—a review10.1016/j.nima.2017.07.040 ↗
16. Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction10.1107/S0021889802009044 ↗
17. Using pulsed neutron transmission for crystalline phase imaging and analysis10.1063/1.1861144 ↗
18. Neutron characterization for additive manufacturing
19. Texture imaging of zirconium based components by total neutron cross-section experiments10.1016/j.jnucmat.2011.06.043 ↗
20. Bragg-edge neutron transmission strain tomography for in situ loadings10.1016/j.nimb.2016.06.012 ↗
21. Neutron Bragg edge tomography for phase mapping10.1016/j.phpro.2015.07.032 ↗
22. In situ time-of-flight neutron imaging of NiO–YSZ anode support reduction under influence of stress10.1107/S1600576716012668 ↗
23. Investigation of the effect of laser shock peening in additively manufactured samples through Bragg edge neutron imaging
24. The energy-resolved neutron imaging system, RADEN10.1063/1.5136034 ↗
25. Unique capabilities and applications of microchannel plate (MCP) detectors with Medipix/Timepix readout10.1016/j.radmeas.2019.106228 ↗
26. Optimization of Timepix count rate capabilities for the applications with a periodic input signal10.1088/1748-0221/9/05/C05026 ↗
27. NXS: a program library for neutron cross section calculations10.1107/S0021889812016056 ↗
28. Effect of process parameters on the microstructure, tensile strength and productivity of 316L parts produced by laser powder bed fusion10.1016/j.matchar.2019.110016 ↗
29. Effect of scan rotation on the microstructure development and mechanical properties of 316Lva parts produced by laser powder bed fusion
30. In-situ neutron diffraction during biaxial deformation10.1016/j.actamat.2015.12.015 ↗
31. Gas tungsten arc welding of as-rolled crmnfeconi high entropy alloy10.1016/j.matdes.2020.108505 ↗
32. Stress calculation error analysis for incremental hole-drilling residual stress measurements10.1115/1.2805924 ↗
33. 3D laser shock peening–a new method for the 3D control of residual stresses in selective laser melting10.1016/j.matdes.2017.05.083 ↗
34. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel10.1007/s11661-014-2549-x ↗
35. Neutron diffraction measurements of residual stress in additively manufactured stainless steel10.1016/j.msea.2016.09.086 ↗
36. Tailoring residual stress profile of selective laser melted parts by laser shock peening
37. Residual stress determination by neutron diffraction in powder bed fusion-built alloy 718: influence of process parameters and post-treatment10.1016/j.matdes.2020.109045 ↗
38. Competitive grain growth and dendrite morphology evolution in selective laser melting of Inconel 718 superalloy10.1016/j.jcrysgro.2019.05.027 ↗
39. Correlation of meltpool characteristics and residual stresses at high laser intensity for metal lpbf process
40. Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V10.1016/j.msea.2017.11.103 ↗