Physics-based crack formation model for René 80 in laser blown directed energy deposition: Theory and experiment
Source abstract
Abstract
Hot cracking prevents the additive manufacturing of a range of high-strength and temperature alloys. This work presents a physics-driven method for avoiding crack formation in the crack-susceptible nickel-based superalloy René 80 built using laser blown-powder directed energy deposition (DED-LB/M). A hierarchal model that links process parameters, thermal features, and crack formation is proposed. The model uses a multi-source Rosenthal model calibrated against process monitoring to provide thermal features as an input to a simplified crack formation criterion based on the Rappaz-Drezet-Gremaud model. The results of the hierarchal model are developed and tested on single-pass walls built with a range of process parameters. The model matches the observed crack formation trend. The concepts are then applied for contour and hatch walls, and results suggest that this approach may be geometrically generalizable.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Liquation cracking in the heat-affected zone of IN738 superalloy weld
2. Direct laser metal deposition of Inconel 73810.1016/j.msea.2018.10.020 ↗
3. Additive manufacturing of powdery Ni-based superalloys Mar-M-247 and CM 247 LC in hybrid laser metal deposition10.1007/s11661-018-4777-y ↗
4. Additive manufacturing and characterization of Rene 80 superalloy processed through scanning laser epitaxy for turbine engine hot-section component repair10.1002/adem.201400589 ↗
5. On the strengthening and embrittlement mechanisms of an additively manufactured nickel-base superalloy10.1016/j.mtla.2020.100657 ↗
6. Development of a new alumina-forming crack-resistant high-γ′ fraction Ni-base superalloy for additive manufacturing10.1007/978-3-030-51834-9_102 ↗
7. Computational design of additively printable nickel superalloys
8. Investigation of cracking causes during multi-pass laser cladding of heat-resistant single crystal nickel alloy10.1016/j.procir.2020.09.059 ↗
9. The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy10.1016/j.jmatprotec.2021.117398 ↗
10. A survey of transfer learning10.1186/s40537-016-0043-6 ↗
11. J. Beuth, J. Fox, J. Gockel, C. Montgomery, R. Yang, H. Qiao, E. Soylemez, P. Reeseewatt, A. Anvari, S. Narra, and N. Klingbeil, Process mapping for qualification across multiple direct metal additive manufacturing processes, In Solid Freeform Fabrication Proceedings, pp. 655–665, Austin: Univ. Tex., (August 2013).
12. Review on thermal analysis in laser-based additive manufacturing10.1016/j.optlastec.2018.04.034 ↗
13. Probabilistic machine learning assisted feature-based qualification of DED Ti6410.1007/s11837-021-04770-3 ↗
14. K. Sadekar, S. Mallick, Camera calibration using OpenCV, 〈https://learnopencv.com/camera-calibration-using-opencv/〉.
15. Bishop · 2006
16. TWI, How can I minimize the risk of solidification cracking in submerged arc (saw) welds?. 〈https://www.twi-global.com/technical-knowledge/faqs/faq-how-can-i-minimise-the-risk-of-solidification-cracking-in-submerged-arc-saw-welds〉.
17. Advances in Bayesian probabilistic modeling for industrial applications
18. Linear vs. quadratic discriminant analysis classifier: a tutorial10.1504/IJAPR.2016.079050 ↗
19. A new hot-tearing criterion10.1007/s11661-999-0334-z ↗
20. J.C. Ramirez, C. Beckermann, Evaluation of a Rayleigh-number-based freckle criterion for Pb-Sn alloys and Ni-base superalloys, Metallurgical and Materials Transactions A, 34(7), pp. 1525–1536 (2003).10.1007/s11661-003-0264-0 ↗
21. Mathematical modeling of porosity formation in solidification10.1007/BF02679728 ↗
22. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
23. D. Rosenthal, The theory of moving sources of heat and its application to metal treatments. Transactions ASME, 43, 849–866.
24. A closed-form solution for the effect of free edges on melt pool geometry and solidification microstructure in additive manufacturing of thin-wall geometries10.1007/s11663-015-0547-z ↗
25. An analytic computation of temperature field evolved in directed energy deposition10.1115/1.4040621 ↗
26. scikit-optimize/scikit-optimize (v0.9.0)
27. D. Emaasit, Pymc-learn: Practical probabilistic machine learning in Python. arXiv preprint arXiv:1811.00542 (2018).
28. On the scrambled Soboĺ sequence
29. An extended Rosenthal weld model
30. Temperature fields produced by traveling distributed heat sources
31. Welding of Precipitation Hardening Nickel-Base Alloys
32. Microstructure, mechanical properties and cracking behaviour in a γ′-precipitation strengthened nickel-base superalloy fabricated by electron beam melting10.1016/j.matdes.2018.08.054 ↗
33. Geometry-induced spatial variation of microstructure evolution during selective electron beam melting of Rene-N510.1007/s11661-018-4793-y ↗
34. Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting10.1016/j.actamat.2013.04.002 ↗
35. Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion10.1016/j.msea.2019.138849 ↗
36. Additive manufacturing and characterization of René 80 superalloy processed through scanning laser epitaxy for turbine engine hot‐section component repair10.1002/adem.201400589 ↗
37. On the spatial variation of the microstructure and microhardness properties of nickel-based superalloy René 142 fabricated via scanning laser epitaxy (SLE)10.1520/MPC20180112 ↗
38. Additive manufacturing of nickel superalloys: opportunities for innovation and challenges related to qualification10.1007/s11661-018-4702-4 ↗
39. Laser powder bed fusion of a new high gamma prime Ni-based superalloy with improved weldability10.1016/j.matdes.2021.109895 ↗
40. Integrated approach for prediction of hot tearing10.1007/s11661-009-9941-y ↗
41. Roles of tension and solidification shrinkage in solidification cracking during aluminium arc welding10.1080/13621718.2021.1985368 ↗
42. Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting10.1016/j.scriptamat.2019.04.036 ↗