journal article·2022-01

Interfacial combination of Ti3C2Tx MXene with waterborne epoxy anticorrosive coating

Changchun Zhao, Min Zhou, Haibin Yu

Publisher page

Abstract

Abstract Interfacial combination of two-dimensional material composite coatings is one of the main factors affecting anti-corrosion performance of coatings. The surface of MXene are usually covered with active groups such as F, O, OH, etc. However, the interactions between active groups and epoxy molecules are still unclear. Here in, the adsorption stability and chemical bond types of Ti3C2Tx/epoxy structures with different surface groups were investigated by first-principles calculations. The waterborne Ti3C2Tx/epoxy composite coatings were prepared by liquid phase blending method. The micro-structures, anticorrosion performance and compactness of the coatings were studied. Based on the theoretical calculations, Ti3C2Tx shows excellent adsorption stability with epoxy molecules, and the Ti3C2Tx with OH groups exhibited the best adsorption stability due to the formation of covalent bonds between OH groups and the epoxy groups (or benzene structures). The experimental results show that, Ti3C2Tx nanosheets can disperse uniformly in the coating prepared by the liquid phase blending method. The micro-pores in composite coatings are improved, and the impedance modulus is 2 orders of magnitude much higher than that of pure epoxy coating. In this work, the studies of the adsorption behavior of Ti3C2Tx MXene to epoxy groups and benzene structures provide a reliable basis for the subsequent targeted regulation of the interaction between them.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advanced Photocatalysis Techniques · 2D Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Effects of N-alkylation on anticorrosion performance of doped polyaniline/epoxy coating10.1016/j.jmst.2019.06.012 ↗
2. Study of dielectric relaxations in zinc oxide-epoxy resin nanocomposites10.1016/j.jallcom.2008.10.084 ↗
3. Self-healing hybrid nanocomposite anticorrosive coating from epoxy/modified nanosilica/perfluorooctyl triethoxysilane10.1016/j.porgcoat.2016.12.020 ↗
4. Fabrication of ZnO/epoxy resin superhydrophobic coating on AZ31 magnesium alloy10.1016/j.cej.2019.02.032 ↗
5. Improved corrosion protection of waterborne epoxy/graphene coating by combining non-covalent and covalent bonds10.1016/j.reactfunctpolym.2019.02.001 ↗
6. Superior compatible interface and non-conductive two dimensional(2D) Co2(OH)2BDC nanosheets enabled the robust anti-corrosion and anti-friction performance epoxy coating system
7. Anticorrosion performance of electro-deposited epoxy/ amine functionalized graphene oxide nanocomposite coatings10.1016/j.corsci.2020.109143 ↗
8. Highly orientated graphene/epoxy coating with exceptional anti-corrosion performance for harsh oxygen environments10.1016/j.corsci.2020.109049 ↗
9. Bioinspired ultrathin graphene nanosheets sandwiched between epoxy layers for high performance of anticorrosion coatings10.1016/j.cej.2020.128301 ↗
10. Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances10.1016/j.carbon.2020.12.084 ↗
11. Synergistic functionalization of h-BN by mechanical exfoliation and PEI chemical modification for enhancing the corrosion resistance of waterborne epoxy coating10.1016/j.porgcoat.2020.105541 ↗
12. Evaluating the performance of MoS2 based materials for corrosion protection of mild steel in an aggressive chloride environment10.1039/C7RA01372H ↗
13. In situ assemble Ti3C2Tx MXene@MgAl-LDH heterostructure towards anticorrosion and antiwear application10.1016/j.cej.2021.130050 ↗
14. Synergistic Effect of Polypyrrole-Intercalated Graphene for Enhanced Corrosion Protection of Aqueous Coating in 3.5% NaCl Solution10.1021/acsami.7b08325 ↗
15. Enhanced functional properties of CeO2 modified graphene/epoxy nanocomposite coating through interface engineering10.1016/j.surfcoat.2020.126819 ↗
16. Poly (o-phenylenediamine) modified graphene toward the reinforcement in corrosion protection of epoxy coatings10.1016/j.corsci.2019.108131 ↗
17. Graphene and MXene Nanomaterials: Toward High-Performance Electromagnetic Wave Absorption in Gigahertz Band Range10.1002/adfm.202000475 ↗
18. Modulation engineering of 2D MXene-based compounds for metal-ion batteries10.1039/C9NR08217D ↗
19. Reductive Sequestration of Toxic Bromate from Drinking Water using Lamellar Two-Dimensional Ti3C2TX (MXene)10.1021/acssuschemeng.8b01147 ↗
20. Ti3C2 MXene-Based Sensors with High Selectivity for NH3 Detection at Room Temperature10.1021/acssensors.9b01308 ↗
21. MXenes for polymer matrix electromagnetic interference shielding composites: A review10.1016/j.coco.2021.100653 ↗
22. Nanoscale Elastic Changes in 2D Ti3C2Tx (MXene) Pseudocapacitive Electrodes10.1002/aenm.201502290 ↗
23. Predicted Surface Composition and Thermodynamic Stability of MXenes in Solution10.1021/acs.jpcc.5b11887 ↗
24. Mechanically strong MXene/Kevlar nanofiber composite membranes as high-performance nanofluidic osmotic power generators10.1038/s41467-019-10885-8 ↗
25. MXene/Polymer Hybrid Materials for Flexible AC-Filtering Electrochemical Capacitors10.1016/j.joule.2018.10.017 ↗
26. Charge transfer induced polymerization of EDOT confined between 2D titanium carbide layers10.1039/C7TA00149E ↗
27. MXene (Ti3C2Tx) Functionalized Short Carbon Fibers as a Cross-Scale Mechanical Reinforcement for Epoxy Composites10.3390/polym13111825 ↗
28. Attapulgite-MXene Hybrids with Ti3C2Tx Lamellae Surface Modified by Attapulgite as a Mechanical Reinforcement for Epoxy Composites10.3390/polym13111820 ↗
29. Flexible and conductive MXene films and nanocomposites with high capacitance10.1073/pnas.1414215111 ↗
30. Large Dielectric Constant Enhancement in MXene Percolative Polymer Composites10.1021/acsnano.7b08895 ↗
31. Highly Conductive Transition Metal Carbide/Carbonitride(MXene)@polystyrene Nanocomposites Fabricated by Electrostatic Assembly for Highly Efficient Electromagnetic Interference Shielding10.1002/adfm.201702807 ↗
32. Functionalization with MXene (Ti3C2) Enhances the Wettability and Shear Strength of Carbon Fiber-Epoxy Composites10.1021/acsanm.9b01127 ↗
33. Aqueous solution-processed MXene (Ti3C2Tx) for non-hydrophilic epoxy resin-based composites with enhanced mechanical and physical properties10.1016/j.matdes.2020.109276 ↗
34. Surface Functionalization of Ti3C2Tx MXene with Highly Reliable Superhydrophobic Protection for Volatile Organic Compounds Sensing10.1021/acsnano.0c03896 ↗
35. Role of surface structure on Li-ion energy storage capacity of two-dimensional transition-metal carbides10.1021/ja501520b ↗
36. Functionalized MXenes as effective polyselenide immobilizers for lithium-selenium batteries: a density functional theory (DFT) study10.1039/D0NR02296A ↗
37. Wettability of MXene and its interfacial adhesion with epoxy resin10.1016/j.matchemphys.2020.123820 ↗
38. Amino-functionalized Ti3C2T with anti-corrosive/wear function for waterborne epoxy coating10.1016/j.jmst.2020.05.002 ↗
39. Synthesis of two-dimensional Ti3C2Tx MXene using HCl+LiF etchant: Enhanced exfoliation and delamination10.1016/j.jallcom.2016.10.127 ↗
40. Ti3C2 MXene nanosheets toward high-performance corrosion inhibitor for epoxy coating10.1016/j.porgcoat.2019.06.013 ↗
41. Freezing Titanium Carbide Aqueous Dispersions for Ultra-long-term Storage10.1021/acsami.0c06728 ↗
42. Efficient Iterative Schemes for Ab Initio Total-Energy Calculations Using a Plane-Wave Basis Set, Physical review
43. Ernzerhof · Generalized Gradient Approximation Made Simple · 1996
44. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
45. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
46. A fast and robust algorithm for Bader decomposition of charge density10.1016/j.commatsci.2005.04.010 ↗
47. An acid induction strategy to construct an ultralight and durable amino-functionalized graphene oxide aerogel for enhanced quinoline pollutants extraction from coking wastewater10.1016/j.cej.2021.128686 ↗
48. Morphology, toughness mechanism, and thermal properties of hyperbranched epoxy modified diglycidyl ether of bisphenol A (DGEBA) interpenetrating polymer networks
49. How a bio-based epoxy monomer enhanced the properties of diglycidyl ether of bisphenol A (DGEBA)/graphene composites10.1039/c3ta01700a ↗
50. Heterogeneous nuclei effect of MgAl2O4 on NbC in Fe matrix MMC coating10.1016/j.apsusc.2018.11.089 ↗
51. Synthesis of Graphene Oxide-Based Sulfonated Oligoanilines Coatings for Synergistically Enhanced Corrosion Protection in 3.5% NaCl Solution10.1021/acsami.6b13722 ↗
52. Controlled Preparation of MgAl-Layered Double Hydroxide/Graphene Hybrids and Their Applications for Metal Protection10.1021/acs.iecr.9b01742 ↗
53. Hybrids of Two-Dimensional Ti3C2 and TiO2 Exposing 001 Facets toward Enhanced Photocatalytic Activity10.1021/acsami.5b11973 ↗
54. A comprehensive review on graphene-based anti-corrosive coatings10.1016/j.cej.2019.05.034 ↗