journal article·2013-04

Microstructures of Ni–AlN composite coatings prepared by pulse electrodeposition technology

Fafeng Xia, Huibin Xu, Chao Liu, Jinwu Wang, Junjie Ding, Chunhua Ma

Publisher page

Abstract

Abstract Ni–AlN composite coating was fabricated onto the surface of steel substrates by using pulse electrodeposition (PED) technique in this work. The effect of pulse current on the nucleation and growth of grains was investigated using transmission electronic microscopy (TEM), X-ray diffraction (XRD), scanning electronic microscopy (SEM) and atomic force microscopy (AFM), respectively. The results show that the contents of AlN nanoparticles increase with density of pulse current and on-duty ratio of pulse current increasing. Whereas the size of nickel grains decreases with density of pulse current increasing and on-duty ratio of pulse current decreasing. Ni–AlN composite coating consists of crystalline nickel (∼68 nm) and AlN particles (∼38 nm). SEM and AFM observations show that the composite coatings obtained by PED showed more compact surfaces and less grain sizes, whereas those obtained by direct current electrodepositing have rougher surfaces and bigger grain sizes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Electrolytic deposition of magnesium-substituted hydroxyapatite crystals on titanium substrate10.1016/j.matlet.2009.07.048 ↗
2. Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition10.1016/j.apsusc.2009.02.086 ↗
3. Preparation and characterization of hydroxyapatite/titania composite coating on NiTi alloy by electrochemical deposition10.1016/j.surfcoat.2010.11.049 ↗
4. Can modern restorative procedures and materials reliably seal cavities? In vitro investigations. Part 1
5. The influence of the magnetic field configuration on plasma parameters and microstructure of niobium nitride films10.1016/j.surfcoat.2006.08.120 ↗
6. Structural characterization of nickel tantalum oxide synthesized by sol–gel spin coating technique10.1016/S0167-577X(00)00205-6 ↗
7. The effect of deposition parameters on tensile properties of pulse-plated nanocrystalline nickel10.1557/PROC-634-B3.11.1 ↗
8. Composite electrodeposition to obtain nanostructured coatings10.1149/1.1377279 ↗
9. Experimental study of brushite precipitation10.1016/j.jcrysgro.2004.04.024 ↗
10. Oxidation properties of Zr–Nb alloys at 500–600°C under low oxygen potentials10.1016/j.corsci.2004.06.011 ↗
11. Preparation and characterization of self-assembled alkanephosphate monolayers on glass substrate coated with nano-TiO2 thin film10.1016/S0025-5408(01)00731-0 ↗
12. Nanostructured Ni–AlN composite coatings10.1016/j.surfcoat.2006.06.002 ↗
13. Tribological behavior of carbon nanotubes-reinforced nickel matrix composite coatings10.1023/A:1013550326279 ↗
14. Sliding wear behavior of HVOF-sprayed Cr3C2–NiCr/CeO2 composite coatings at elevated temperature up to 800°C10.1007/s11249-009-9540-5 ↗
15. Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2–BaF2·CaF2 composite coating10.1016/j.surfcoat.2009.03.027 ↗
16. Preparation and spray drying of Al2O3–TiO2 nanoparticle suspensions to obtain nanostructured coatings by APS10.1016/j.surfcoat.2010.06.002 ↗
17. Ultrasonic-electrodeposited nano Ni–AlN composite layers and characterization
18. Electrolytic plasma technology: science and engineering—an overview10.1016/j.surfcoat.2006.11.023 ↗
19. Characterization of ceramic coatings fabricated on zirconium alloy by plasma electrolytic oxidation in silicate electrolyte10.1016/j.matchemphys.2009.12.012 ↗
20. Preparation and characterization of Nano Ni–TiN coatings deposited by ultrasonic electrodeposition10.1016/j.jallcom.2009.10.026 ↗
21. Electrodeposited Co–Ni–Al2O3 composite coatings10.1016/S0257-8972(03)00739-4 ↗
22. Effect of surfactant on the electrodeposition and wear resistance of Ni–Al2O3 composite coatings10.1016/j.msea.2006.06.098 ↗