A molecular dynamic study of nano-grinding of a monocrystalline copper-silicon substrate
Source abstract
Abstract
Abstract We performed molecular dynamics simulations to study the nano-grinding process of copper-silicon with a single diamond abrasive grain. The Cu-Si model was based on the modified embedded-atom method. The effects of grinding depth, speed, and Cu thickness on material removal, defects, grinding forces, and temperature were analyzed based on dislocations and phase transitions. Our results show that effects of the interface emerge at a 4.3-nm Cu layer. Shockley dislocations extend from the ground surface to the Cu-Si interface, accompanied by formation of hexagonal-close-packed (HCP) Cu. Shockley dislocations, which lead to the HCP transition, clearly increase at a grinding depth of 4.3 nm. The phase transitions from the face-centered cubic to body-centered cubic structures are accompanied by an increase in the atomic kinetic energy. Kinetic energy is released as material recovers from elastic deformation. At high absorbed energies of 7.3 eV/atom potential and 4.4 eV/atom kinetic, the HCP structure is formed between the body-centered cubic and face-centered cubic phases. For the thinner Cu layer (2.2 nm), as the grinding depth gets closer to the Cu-Si interface, more chips form, causing the tangential forces to increase sharply, whereas the normal forces remain almost unchanged. Within a grinding speed range of 40 and 120 m/s, there is a linear positive correlation between the grinding temperature and the speed. The workpiece temperature rises by approximately 30 K for every 20 m/s increase in the speed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Investigations of tool edge radius effect in micromachining: a FEM simulation approach10.1016/j.jmatprotec.2007.04.137 ↗
2. Lauro · 2015 · 65
3. Process modeling of orthogonal cutting by the rigid-plastic finite element method10.1115/1.3225687 ↗
4. A finite element model of orthogonal metal cutting10.1115/1.3186008 ↗
5. J.F. Belak, I.F. Stowers, A Molecular Dynamics Model of the Orthogonal Cutting Process, United States, 1990.
6. Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation10.1016/S0007-8506(07)62399-3 ↗
7. Molecular dynamics simulation for abrasive processes10.1016/S0007-8506(07)62224-0 ↗
8. Investigation of surface integrity by molecular dynamics simulation10.1016/S0007-8506(07)62329-4 ↗
9. Some aspects of machining with negative-rake tools simulating grinding: a molecular dynamics simulation approach10.1080/13642819908214852 ↗
10. Friction and tool wear in nano-scale machining-a molecular dynamics approach10.1016/0043-1648(95)06633-0 ↗
11. Mechanics and energy dissipation in nanoscale cutting10.1016/S0007-8506(07)62396-8 ↗
12. A study on orthogonal micro machining of single crystal copper10.2493/jjspe.57.1247 ↗
13. Three-dimensional molecular dynamics analysis of processing using a pin tool on the atomic scale10.1088/0957-4484/11/3/302 ↗
14. R. Komanduri, N. Ch And Rasekaran, L.M. Raff, Molecular dynamics simulation of the nanometric cutting of silicon, Philos. Mag. B, 81(2001), pp.1989–2019. https://doi.org/10.1080/13642810108208555.10.1080/13642810108208555 ↗
15. Nanotwinning in monocrystalline silicon upon nanoscratching10.1016/j.scriptamat.2011.04.012 ↗
16. A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding10.1016/j.apsusc.2014.02.178 ↗
17. Molecular dynamics research on ultra-high-speed grinding mechanism of monocrystalline nickel10.1016/j.apsusc.2018.06.042 ↗
18. Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalline silicon10.1016/j.mssp.2016.04.013 ↗
19. Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations10.1016/j.apsusc.2014.10.149 ↗
20. Investigation of machining mechanism of monocrystalline silicon in nanometric grinding10.1063/1.4983216 ↗
21. M.J. Kramer, A. Cadien, T. Fujita, M.W. Chen, H.W. Sheng, Highly optimized embedded-atom-method potentials for fourteen fcc metals, Phys. Rev. B, 83(2011), pp.134118. 10.1103/PhysRevB.83.134118.10.1103/PhysRevB.83.134118 ↗
22. Structural stability and lattice defects in copper: ab initio, tight-binding, and embedded-atom calculations10.1103/PhysRevB.63.224106 ↗
23. M. M., Through-silicon via (TSV), P. IEEE, 97(2009), pp.43–48. https://doi.org/10.1109/JPROC.2008.2007462.10.1109/JPROC.2008.2007462 ↗
24. Grain boundary diffusion control of Cu films prepared by the ICB technique10.1016/0168-583X(89)90320-0 ↗
25. An embedded-atom potential for the Cu-Ag system10.1088/0965-0393/14/5/002 ↗
26. Nanometric cutting of copper: a molecular dynamics study10.1016/j.commatsci.2005.10.006 ↗
27. Shearing single crystal copper in molecular dynamics simulation at different temperatures10.1016/j.commatsci.2014.02.019 ↗
28. Liquid/vapor surface tension of metals: embedded atom method with charge gradient corrections10.1103/PhysRevLett.86.2066 ↗
29. Modified embedded-atom potentials for cubic materials and impurities10.1103/PhysRevB.46.2727 ↗
30. Determination of modified embedded atom method parameters for nickel10.1016/S0254-0584(97)80252-0 ↗
31. Modified embedded atom method potential for Al, Si, Mg, Cu, and Fe alloys10.1103/PhysRevB.85.245102 ↗
32. Second nearest-neighbor modified embedded-atom-method potential10.1103/PhysRevB.62.8564 ↗
33. Strength of Ta-Si interfaces by molecular dynamics10.1016/S0026-2714(02)00325-6 ↗
34. Atomistic potentials for the molybdenum-silicon system10.1016/S0921-5093(98)01062-4 ↗
35. Towards a deeper understanding of wear and friction on the atomic scale-a molecular dynamics analysis10.1016/S0043-1648(97)00073-2 ↗
36. Molecular dynamics simulation of phase transformations in silicon monocrystals due to nano-indentation10.1088/0957-4484/11/3/307 ↗
37. Nano-sclerometry measurements of superhard materials and diamond hardness using scanning force microscope with the ultrahard fullerite C60 tip10.1557/JMR.1997.0406 ↗
38. The nanoindentation behaviour of hard and soft films on silicon substrates10.1016/j.tsf.2004.03.006 ↗
39. Investigation of nanocutting characteristics of off-axis 4H-SiC substrate by molecular dynamics
40. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
41. Damage-free machining of monocrystalline silicon carbide10.1016/j.cirp.2013.03.098 ↗
42. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
43. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
44. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
45. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
46. Effect of vacancy defects on generalized stacking fault energy of fcc metals10.1088/0953-8984/26/11/115404 ↗
47. The formation and destruction of stacking fault tetrahedron in fcc metals: a molecular dynamics study10.1016/j.scriptamat.2017.04.019 ↗
48. The reinforcement and defect interaction of two-dimensional lattice materials with imperfections10.1016/j.ijsolstr.2012.04.002 ↗
49. Stress concentration in two-dimensional lattices with imperfections10.1007/s00707-010-0354-1 ↗
50. Correlation between the microstructural defects and residual stress in a single crystal nickel-based superalloy during different creep stages10.1007/s12540-018-0106-7 ↗
51. Study on subsurface damage of wafer silicon containing through silicon via in thinning10.1140/epjp/i2019-12591-4 ↗
52. Fractal roughness effects on nanoscale grinding10.1016/j.apsusc.2018.10.144 ↗
53. Mechanisms of subsurface damage and material removal during high speed grinding processes in Ni/Cu multilayers using a molecular dynamics study10.1039/C7RA06975H ↗
54. Molecular dynamics simulations of thermal effects in nanometric cutting process10.1007/s11431-009-0243-9 ↗
55. Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy10.1016/j.apsusc.2014.08.031 ↗