Structure, stability and electrochromic properties of polyaniline film covalently bonded to indium tin oxide substrate
Source abstract
Abstract
Abstract Indium tin oxide (ITO) substrate was modified with 4-aminobenzylphosphonic acid (ABPA), and then the polyaniline (PANI) film covalently bonded to ITO substrate was prepared by the chemical oxidation polymerization. X-ray photoelectron spectroscopy (XPS), attenuated total reflection infrared (ATR-IR) spectroscopy, and atomic force microscopy (AFM) measurements demonstrated that chemical binding was formed between PANI and ABPA-modified ITO surface, and the maximum thickness of PANI layer is about 30 nm. The adhesive strength of PANI film on ITO substrate was tested by sonication. It was found that the film formed on the modified ITO exhibited a much better stability than that on bare one. Cyclic voltammetry (CV) and UV–vis spectroscopy measurements indicated that the oxidative potentials of PANI film on ABPA-modified ITO substrate were decreased and the film exhibited high electrochemical activities. Moreover, the optical contrast increased from 0.58 for PANI film (without ultrasound) to 1.06 for PANI film (after ultrasound for 60 min), which had an over 83% enhancement. The coloration time was 20.8 s, while the bleaching time was 19.5 s. The increase of electrochromic switching time was due to the lower ion diffusion coefficient of the large cation of (C 4 H 9 ) 4 N + under the positive and negative potentials as comparison with the small Li + ion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Studies on the effect of solvents on self-assembled monolayers formed from organophosphonic acids on indium tin oxide10.1021/la3010129 ↗
2. Coordination-based molecular assemblies as electrochromic materials: ultra-high switching stability and coloration efficiencies10.1021/jacs.5b00429 ↗
3. Electrochromic bis(terpyridine)metal complex nanosheets10.1021/ja510788b ↗
4. Patterning indium tin oxide and indium zinc oxide using microcontact printing and wet etching10.1021/la015543g ↗
5. Self-assembly of carboxyalkylphosphonic acids on metal oxide powders10.1021/la015749h ↗
6. Hybrid materials from organophosphorus coupling molecules10.1039/b505422b ↗
7. Systems for orthogonal self-assembly of electroactive monolayers on Au and ITO: an approach to molecular electronics10.1021/ja00131a015 ↗
8. Adsorption of hexylferrocene phosphonic acid on indium-tin oxide electrodes. Evidence of strong interchain interactions in ferrocene self-assembled monolayers10.1021/la030150y ↗
9. Electroluminescence: enhanced injection using ITO electrodes coated with a self assembled monolayer10.1016/S0925-3467(97)00110-9 ↗
10. Injection modifications by ITO functionalization with a self-assembled monolayer in OLEDs10.1016/S0379-6779(02)01270-5 ↗
11. Advanced surface modification of indium tin oxide for improved charge injection in organic devices10.1021/ja050481s ↗
12. Tailoring the work function of indium tin oxide electrodes in electrophosphorescent organic light-emitting diodes10.1063/1.3095492 ↗
13. Modification of the surface properties of indium tin oxide with benzylphosphonic acids: a joint experimental and theoretical study10.1002/adma.200900502 ↗
14. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
15. Spatially modulating interfacial properties of transparent conductive oxides: patterning work function with phosphonic acid self-assembled monolayers10.1002/adma.201102321 ↗
16. Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer10.1063/1.124789 ↗
17. Using self-assembling dipole molecules to improve hole injection in conjugated polymers10.1002/adfm.200400035 ↗
18. Phosphonic acid modification of indium-tin oxide electrodes: combined XPS/UPS/contact angle studies10.1021/jp710893k ↗
19. Electrochromic materials and devices: present and future10.1016/S0254-0584(01)00575-2 ↗
20. Switchable window based on electrochromic polymers10.1557/JMR.2004.0259 ↗
21. Spectroelectrochemical analysis of charge carriers as a way of improving poly(p-phenylene)-based electrochromic windows10.1021/acs.jpcc.5b06846 ↗
22. Toward the development of new textile/plastic electrochromic cells using triphenylamine-based copolymers10.1021/cm060407o ↗
23. All-organic electrochromic spandex10.1021/am900767p ↗
24. Layer-by-layer assembled sulfonated-graphene/polyaniline nanocomposite films: enhanced electrical and ionic conductivities, and electrochromic properties10.1039/c2ra21579a ↗
25. Monk · 2007
26. Color control in π-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
27. Hybrid materials and polymer electrolytes for electrochromic device applications10.1002/adma.201200213 ↗
28. Electrochromic materials10.1146/annurev-matsci-062910-100344 ↗
29. Flexible electrochromic device based on poly (3,4-(2,2-dimethylpropylenedioxy)thiophene)10.1016/j.electacta.2008.07.049 ↗
30. Contrast, switching speed, and durability of V2O5-TiO2 film-based electrochromic windows10.1149/1.3031978 ↗
31. Solid-state electrochromic devices: relationship of contrast as a function of device preparation parameters10.1039/C3TC32319F ↗
32. Recent advances in electrochromic polymers10.1016/j.polymer.2014.08.046 ↗
33. Tuning the painter's palette: subtle steric effects on spectra and colour in conjugated electrochromic polymers10.1039/C4TC02685C ↗
34. An electrochromic painter's palette: color mixing via solution co-processing10.1021/am507514z ↗
35. Thiadiazolo[3,4-c]pyridine as an acceptor toward fast-switching green donor–acceptor-type electrochromic polymer with low bandgap10.1021/acsami.5b01188 ↗
36. Highly regiosymmetric homopolymer based on dioxythiophene for realizing water-processable blue-to-transmissive electrochrome10.1021/acsami.5b01908 ↗
37. A pure blue to highly transmissive electrochromic polymer based on poly(3,4-propylenedioxyselenophene) with a high optical contrast ratio10.1021/acs.macromol.5b00022 ↗
38. 4,9-Dihydro-s-indaceno[1,2-b:5,6-b′]dithiophene-embedded electrochromic conjugated polymers with high coloration efficiency and fast coloration time10.1016/j.solmat.2015.01.007 ↗
39. Process controlled performance for soluble electrochromic polymers10.1016/j.solmat.2015.03.018 ↗
40. One-pot synthesis of hybrid TiO2-polyaniline nanoparticles by self-catalyzed hydroamination and oxidative polymerization from TiO2-methacrylic acid nanoparticles10.1039/c1cc13137k ↗
41. Effect of deposition charges on the wettability performance of electrochromic polymers10.1016/j.apsusc.2015.01.103 ↗
42. An unusual electrochromic device based on a new low-bandgap conjugated polymer10.1002/adma.200390030 ↗
43. Four shades of brown: tuning of electrochromic polymer blends toward high-contrast eyewear10.1021/am507063d ↗
44. High performance and long-term stability in ambiently fabricated segmented solid-state polymer electrochromic displays10.1021/acsami.5b02090 ↗
45. Electrochemical synthesis and surface characterization of poly(3,4-ethylenedioxythiophene) films grown in an ionic liquid10.1021/la702442c ↗
46. Polypyrrole films electropolymerized from ionic liquids and in a traditional liquid electrolyte: a comparison of morphology and electro-optical properties10.1016/j.eurpolymj.2008.07.045 ↗
47. Electrochromic properties of multicolored novel polymer synthesized via combination of benzotriazole and N-functionalized 2,5-di(2-thienyl)-1H-pyrrole units10.1016/j.electacta.2014.06.153 ↗
48. Modification of ITO surface for high performance of electrochromic polymer film10.6023/A13020168 ↗
49. Theoretical characterization of the indium tin oxide surface and of its binding sites for adsorption of phosphonic acid monolayers10.1021/cm8014622 ↗
50. The modification of indium tin oxide with phosphonic acids: mechanism of binding, tuning of surface properties, and potential for use in organic electronic applications10.1021/ar200119g ↗
51. Bonding self-assembled, compact organophosphonate monolayers to the native oxide surface of silicon10.1021/ja035956z ↗
52. Easy and efficient bonding of biomolecules to an oxide surface of silicon10.1021/la049506b ↗
53. Self-assembled monolayers of α,ω-diphosphonic acids on Ti enable complete or spatially controlled surface derivatization10.1021/la036084h ↗
54. Surface characterization and modification of indium tin oxide in ultrahigh vacuum10.1021/ja992910q ↗
55. Self-assembled monolayers of 6-phenyl-n-hexanethiol and 6-(p-vinylphenyl)-n-hexanethiol on Au(111): an investigation of structure, stability, and reactivity10.1021/la001633u ↗
56. Surface composition and electrical and electrochemical properties of freshly deposited and acid-etched indium tin oxide electrodes10.1021/la701754u ↗
57. Electronic and chemical properties of tin-doped indium oxide (ITO) surfaces and ITO/ZnPc interfaces studied in-situ by photoelectron spectroscopy10.1021/jp056640b ↗
58. High resolution X-ray photoemission study of plasma oxidation of indium-tin-oxide thin film surfaces10.1063/1.1312847 ↗
59. Tailoring 3D single-walled carbon nanotubes anchored to indium tin oxide for natural cellular uptake and intracellular sensing10.1021/nl203780d ↗
60. Tuning specific biomolecular interactions using electro-switchable oligopeptide surfaces10.1002/adfm.201000411 ↗
61. High energy density nanocomposites based on surface-modified BaTiO3 and a ferroelectric polymer10.1021/nn9006412 ↗
62. Colorless triphenylamine-based aliphatic thermoset epoxy for multicolored and near-infrared electrochromic applications10.1021/am405803z ↗
63. Covalently bonded polyaniline and para-phenylenediamine functionalized graphene oxide: how the conductive two-dimensional nanostructure influences the electrochromic behaviors of polyaniline10.1016/j.electacta.2014.06.108 ↗
64. Flexible and binder-free organic cathode for high-performance lithium-ion batteries10.1002/adma.201305452 ↗
65. Preparation of high-performance covalently bonded polyaniline nanorods/graphene supercapacitor electrode materials using interfacial copolymerization approach10.1016/j.electacta.2014.01.163 ↗
66. Ion diffusion and optical switching performance of 3D ordered nanostructured polyaniline films for advanced electrochemical/electrochromic devices10.1016/j.electacta.2013.04.102 ↗
67. Diffusion behavior of an ion in polyaniline during doping and undoping processes in acidic aqueous solution10.1021/j100100a032 ↗