journal article·2018-05

Growth (AlCrNbSiTiV)N thin films on the interrupted turning and properties using DCMS and HIPIMS system

Kai-Sheng Chang, Kuan-Ta Chen, Chun-Yao Hsu, Po-Da Hong

Publisher page

Abstract

Abstract This paper determines the optimal settings in the deposition parameters for (AlCrNbSiTiV)N high-entropy alloy (HEAs) nitride films that are deposited on CBN cutting tools and glass substrates. We use direct current magnetron sputtering (DCMS) and high power impulse magnetron sputtering (HIPIMS), with Ar plasma and N2 reactive gases. Experiments with the grey-Taguchi method are conducted to determine the effect of deposition parameters (deposition time, substrate DC bias, DC power and substrate temperature) on interrupted turning 50CrMo4 steel machining and the films’ structural properties. Experimental result shows that the multiple performance characteristics for these (AlCrNbSiTiV)N HEAs film coatings can be improved using the grey-Taguchi method. As can be seen, the coated film is homogeneous, very compact and exhibits perfect adherence to the substrate. The distribution of elements is homogeneous through the depth of the (AlCrNbSiTiV)N film, as measured by an auger electron nanoscope. After interrupted turning with an (AlCrNbSiTiV)N film coated tool, we obtain much longer tool life than when using uncoated tools. The correlation of these results with microstructure analysis and tool life indicates that HIPIMS discharge induced a higher (AlCrNbSiTiV)N film density, a smoother surface structure and a higher hardness surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating10.1016/j.apsusc.2016.11.176 ↗
3. Formation of core–shell structure in high entropy alloy coating by laser cladding10.1016/j.apsusc.2015.12.059 ↗
4. Electrochemical deposition and microstructural characterization ofAlCrFeMnNi and AlCrCuFeMnNi high entropy alloy thin films10.1016/j.apsusc.2015.07.142 ↗
5. Effect of chromium on the formation of intermetallic phases in hot-dipped aluminide Cr–Mo steels10.1016/j.apsusc.2013.04.015 ↗
6. Effect of iron content on the structure and mechanical properties of Al25Ti25Ni25Cu25 and (AlTi)60-xNi20Cu20Fex (x=15, 20) high-entropy alloys10.1016/j.apsusc.2015.07.207 ↗
7. Microstructure and mechanical properties of Al20-xCr20+0.5xFe20Co20Ni20+0.5x high entropy alloys10.1016/j.jallcom.2015.10.258 ↗
8. Comparative study of titanium carbide and nitride coatings grown by cathodic vacuum arc technique10.1016/j.apsusc.2011.09.061 ↗
9. Preparation of silicon carbide nitride thin films by sputtering of silicon nitride target10.1016/S0169-4332(01)00010-1 ↗
10. Structure and properties of (AlCrMnMoNiZrB0.1)Nx coatings prepared by reactive DC sputtering10.1016/j.apsusc.2011.03.083 ↗
11. Structure and properties of two Al–Cr–Nb–Si–Ti high-entropy nitride coatings10.1016/j.surfcoat.2013.01.036 ↗
12. Preparation and characterization of AlCrTaTiZr multi-element nitride coatings10.1016/j.surfcoat.2006.06.048 ↗
13. Optimization of catalyst formation conditions for synthesis of carbon nanotubes using Taguchi method10.1016/j.apsusc.2016.02.216 ↗
14. Reactive co-sputter deposition and properties of CrAlSiN hard films for enhancement of cutting tools10.1016/j.ijrmhm.2016.04.006 ↗
15. Mechanical and tribological properties of CrWN nanostructured hard films10.1166/jnn.2017.13461 ↗
16. Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 2510.1016/j.jclepro.2014.12.020 ↗
17. Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures10.1016/j.apsusc.2014.10.052 ↗
18. Turning of interrupted and continuous hardened steel surfaces using ceramic and CBN cutting tools10.1016/j.jmatprotec.2011.01.002 ↗
19. Optimization of hybrid PVD process of TiAlN coatings by Taguchi method10.1016/j.apsusc.2008.06.204 ↗
20. Introduction to grey system
21. Direct current reactive co-sputter deposition of CrWN films to enhance cutting tool performance10.1016/j.ijrmhm.2012.10.020 ↗
22. Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts10.1016/j.ijfatigue.2017.03.023 ↗
23. Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering10.1016/j.tsf.2010.11.034 ↗
24. A study on the corrosion and erosion behavior of electroless nickel and TiAlN/ZrN duplex coatings on ductile iron10.1016/j.apsusc.2014.10.068 ↗
25. A study of the machining characteristics of micro EDM milling and its improvement by electrode coating10.1007/s00170-014-6778-3 ↗
26. A study of TiMoN nano-multilayer coatings deposited by CFUBMSIP using DC and HIPIMS power10.1016/j.apsusc.2011.04.102 ↗
27. Yi Xu, Effect of bias voltage on TiAlSiN nanocomposite coatings deposited by HiPIMS10.1016/j.apsusc.2016.09.028 ↗
28. Quantitative evaluation of sputtering induced surface roughness and its influence on AES depth profiles of polycrystalline Ni/Cu multilayer thin films10.1016/j.apsusc.2017.03.194 ↗
29. Enhanced properties of tungsten thin films deposited with a novel HiPIMS approach10.1016/j.apsusc.2017.01.067 ↗
30. Optimizing HiPIMS pressure for deposition of high-k (k = 18.3) amorphous HfO210.1016/j.apsusc.2016.01.017 ↗
31. Ionized physical vapor deposition (IPVD): a review of technology and applications10.1016/j.tsf.2006.03.033 ↗