journal article·2021-04

Low-frequency plasma activation of nylon 6

Richard Thompson, David Austin, Chun Wang, Anne Neville, Long Lin

Publisher page

Abstract

Abstract In the study reported in this paper, a series of reproducible conditions were employed to uniformly functionalize nylon 6 surfaces using a commercially available, low-frequency (40 kHz), low-pressure plasma system, utilizing oxygen plasma as a reactive gas. Initially, the plasma-treated samples were investigated using static contact angle measurements, showing a progressive increase in wettability with increasing plasma activation time between 10 and 40 s. Such an increase in wettability (and therefore increase in adhesive capabilities of the surfaces) was attributed to the creation of surface C-OH, C=O, and COOH groups. These surface-chemical modifications were characterized using x-ray photoelectron spectroscopy (XPS) and static secondary ion mass spectrometry (SSIMS). Surface radical densities were also shown to increase following plasma activation, having been quantified using a radical scavenging method based on the molecule 2,2-diphenyl-1-picrylhydrazyl (DPPH). The samples were imaged and analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM), to confirm that there had been no detectable alteration to the surface roughness or morphology. Additionally, the “hydrophobic recovery” or “ageing” of the activated polymer samples, post-plasma treatment, was also investigated in terms of wettability and surface-chemistry, with the wettability of the sample surfaces decreasing over time due to a reduction in surface-oxygen concentration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. White paper on the future of plasma science and technology in plastics and textiles10.1002/ppap.201700228 ↗
2. Substrate-Independent, Transparent Oil-Repellent Coatings with Self-Healing and Persistent Easy-Sliding Oil Repellency10.1021/acsnano.5b06404 ↗
3. Aspects of the hydrophobic effect sustainability obtained in plasma for cotton fabrics10.35530/IT.070.03.1476 ↗
4. Atmospheric-pressure plasma assisted engineering of polymer surfaces: From high hydrophobicity to superhydrophilicity10.1016/j.apsusc.2020.147032 ↗
5. Plasma-based treatments of textiles for water repellency
6. Plasma Treatment in Textile Industry10.1002/ppap.201400052 ↗
7. Effect of Particle Size on Silver Nanoparticle Deposition onto Dielectric Barrier Discharge (DBD) Plasma Functionalized Polyamide Fabric10.1002/ppap.201200089 ↗
8. Novel flame retardant flexible polyurethane foam: plasma induced graft-polymerization of phosphonates10.1039/C5RA08289G ↗
9. Robust Superhydrophobic Cotton Fibers Prepared by Simple Dip-Coating Approach Using Chemical and Plasma-Etching Pretreatments, ACS10.1021/acsomega.9b00688 ↗
10. Antimicrobial cotton textiles with robust superhydrophobicity via plasma for oily water separation10.1016/j.apsusc.2017.05.008 ↗
11. Preparation and properties of nylon 6/sulfonated graphene composites by an in situ polymerization process10.1039/C6RA03017C ↗
12. The effect of plasma modification on the sheet resistance of nylon fabrics coated with carbon nanotubes10.1016/j.apsusc.2012.05.023 ↗
13. A review of low-temperature plasma treatment of textile materials10.1007/s10853-015-9152-4 ↗
14. Surface modification of thermoplastics by low-pressure microwave O2 plasma treatment for enhancement of the adhesion of the interface box/encapsulating resin and the influence on film capacitors operating under extreme humidity conditions10.1016/j.apsusc.2020.145764 ↗
15. Natural dyeing and antibacterial activity of atmospheric-plasma-treated nylon 6 fabric10.1111/cote.12060 ↗
16. Dyeing mechanism and optimization of polyamide 6,6 functionalized with double barrier discharge (DBD) plasma in air10.1016/j.apsusc.2013.12.126 ↗
17. Reactive-ion etching of nylon fabric meshes using oxygen plasma for creating surface nanostructures10.1016/j.apsusc.2015.06.185 ↗
18. Adhesion improvement at polyester fabric-silicone rubber interface by plasmas of argon and airto obtain conveyor belt10.35530/IT.070.05.1501B ↗
19. Surface modification of polyester fabrics by atmospheric-pressure air/He plasma for color strength and adhesion enhancement10.1016/j.apsusc.2016.12.096 ↗
20. Helium/oxygen atmospheric pressure plasma jet treatment for hydrophilicity improvement of grey cotton knitted fabric10.1016/j.apsusc.2011.03.064 ↗
21. Surface modification of cotton fabrics by gas plasmas for color strength and adhesion by inkjet ink printing10.1016/j.apsusc.2015.12.102 ↗
22. Surface processing and ageing behavior of silk fabrics treated with atmospheric-pressure plasma for pigment-based ink-jet printing10.1016/j.apsusc.2017.10.178 ↗
23. Study on the physical-morphological and chemical properties of silk fabric surface modified with multiple ambient gas plasma for inkjet printing10.1016/j.apsusc.2019.06.053 ↗
24. Characterization of atmospheric pressure plasma treated wool/cashmere textiles: Treatment in nitrogen10.1016/j.apsusc.2017.07.280 ↗
25. Low Temperature Plasma on Wool Substrates: The Effect of the Nature of the Gas10.1177/004051759906900604 ↗
26. Functionalization of polymer surfaces by medium frequency non-thermal plasma10.1016/j.apsusc.2017.09.147 ↗
27. Analysis of the low-pressure plasma pretreated polymer surface in terms of acid–base approach10.1016/j.apsusc.2016.02.247 ↗
28. Influence of non-thermal plasma treatement on the adsorption of a stimuli-responsive nanogel onto polyethylene terephthalate fabric10.1016/j.porgcoat.2018.03.023 ↗
29. Actinometry study on dissociation fraction in low pressure capactively coupled Ar–O2 mixture plasma10.1134/S0018143915040116 ↗
30. Plasma processes at atmospheric and low pressures10.1016/j.vacuum.2008.04.063 ↗
31. Enhanced Protein Immobilization on Polymers - A Plasma Surface Activation Study10.3390/polym12010104 ↗
32. Low-temperature plasma modification of carbon nanofillers for improved performance of advanced rubber composites10.1007/s00289-019-02785-0 ↗
33. Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid10.1002/app.25701 ↗
34. Low-Cost Plasma Etching Method for Achieving Size Controlled Non-Close-Packed Monolayer Arrays of Polystyrene Nano-Spheres10.3390/nano9040605 ↗
35. A Systematic Study of Plasma Activation of Silicon Surfaces for Self Assembly10.1021/acsami.5b08358 ↗
36. Surface modification of polyamide meshes and nonwoven fabrics by plasma etching and a PDA/cellulose coating for oil/water separation10.1016/j.apsusc.2019.03.152 ↗
37. Non-thermal plasma treatment of textiles10.1016/j.surfcoat.2007.12.027 ↗
38. The Role of Crystallinity on Polymer Interaction with Oxygen Plasma10.1002/ppap.200900034 ↗
39. Anti-reflective coating for the deep coloring of PET fabrics using an atmospheric pressure plasma technique10.1016/S0257-8972(01)01137-9 ↗
40. New developments in surface functionalization of polymers using controlled plasma treatments10.1088/1361-6463/aa748a ↗
41. Mechanisms of Oxygen Plasma Nanotexturing of Organic Polymer Surfaces: From Stable Super Hydrophilic to Super Hydrophobic Surfaces10.1021/la901072z ↗
42. Simple pre-treatment by low-level oxygen plasma activates screen-printed carbon electrode: potential for mass production
43. A model for diffusion-driven hydrophobic recovery in plasma treated polymers10.1016/j.apsusc.2012.03.122 ↗
44. Suppression of Hydrophobic Recovery by Plasma Polymer Films with Vertical Chemical Gradients10.1021/acs.langmuir.5b03913 ↗
45. Towards understanding hydrophobic recovery of plasma treated polymers: Storing in high polarity liquids suppresses hydrophobic recovery10.1016/j.apsusc.2013.02.078 ↗
46. Surface modification of polyester by oxygen and nitrogen plasma treatment10.1002/sia.2923 ↗
47. Atmospheric Pressure Plasma Processing for Polymer Adhesion: A Review10.1080/00218464.2013.804407 ↗
48. Physical mechanisms of interaction of cold plasma with polymer surfaces10.1016/j.jcis.2015.02.025 ↗
49. Optimization of mica surface hydroxylation in water vapor plasma monitored by optical emission spectroscopy10.1016/j.apsusc.2020.145362 ↗
50. Identification of Gas-Phase Reactive Species and Chemical Mechanisms Occurring at Plasma−Polymer Surface Interfaces10.1021/la0106642 ↗
51. Free-Radical-Induced Grafting from Plasma Polymer Surfaces10.1021/acs.chemrev.5b00634 ↗
52. Surface modification of electrospun polycaprolactone microfibers by air plasma treatment: Effect of plasma power and treatment time10.1016/j.eurpolymj.2016.09.060 ↗
53. Rapid Polymer Brush Growth by TEMPO-Mediated Controlled Free-Radical Polymerization from Swollen Plasma Deposited Poly(maleic anhydride) Initiator Surfaces10.1021/la051566+ ↗
54. Genesis and development of DPPH method of antioxidant assay10.1007/s13197-011-0251-1 ↗
55. Polymers