Enhancing mechanical properties of quasi-continuous-wave laser additive manufactured Inconel 718 through controlling the niobium-rich precipitates
Source abstract
Abstract
Abstract Controlling of Nb-rich intermetallics is an important topic for laser additive manufacturing (LAM) of Inconel 718. In the present work, a novel quasi-continuous-wave LAM (QCW-LAM) with different pulse frequencies is used to control the morphology, distribution and amount of Nb-rich phases of Inconel 718. The results show that dispersively distributed Nb-rich Laves phases are produced by introducing equiaxed dendrites at a low pulse frequency while a high pulse frequency results in coarse and chain-like Laves phases. The samples featured by fine and discrete Laves phases show a good response to the post solution-aging treatment in which the dissolution of Laves-phase and subsequently discrete precipitations of δ-phase as well as high-density precipitation of γ″-Ni3Nb strengthening phase are promoted. Thus, a good combination of strength and ductility is achieved for the QCW-LAM fabricated Inconel 718. This study shows a desired mechanical property can be obtained by synergistically optimizing the microstructures in which various Nb-rich phases are involved even though the formation of brittle Laves phases is hardly avoided during LAM of Inconel 718.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 71810.1007/s11661-009-9949-3 ↗
2. Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process10.1016/j.msea.2019.138327 ↗
3. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
4. Texture control during laser deposition of nickel-based superalloy10.1016/j.scriptamat.2012.06.014 ↗
5. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
6. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
7. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
8. Producing Ni-base superalloys single crystal by selective electron beam melting10.1016/j.scriptamat.2018.03.041 ↗
9. Electron beam additive manufacturing of Inconel 718 alloy rods: impact of build direction on microstructure and high-temperature tensile properties
10. The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition
11. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
12. Multiscale characterization of microstructures and mechanical properties of Inconel 718 fabricated by selective laser melting10.1016/j.jallcom.2018.12.380 ↗
13. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling10.1016/j.jallcom.2016.01.250 ↗
14. Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and gaussian distribution laser10.1016/j.msea.2019.03.096 ↗
15. The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process10.1007/s00170-016-9901-9 ↗
16. Variation of hardness, microstructure, and Laves phase distribution in direct laser deposited alloy 718 cuboids10.1016/j.matdes.2017.01.031 ↗
17. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 71810.1016/j.matdes.2015.10.155 ↗
18. Modeling analysis of laser cladding of a nickel-based superalloy10.1016/j.surfcoat.2014.07.030 ↗
19. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating10.1179/1743294413Y.0000000142 ↗
20. Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring10.1016/j.optlastec.2017.09.022 ↗
21. Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: effects of ultrasonic frequency on microstructural and mechanical properties
22. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
23. Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
24. A review of mechanical properties of additively manufactured Inconel 718
25. Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting10.1016/j.matchar.2018.01.006 ↗
26. Heat treatment of Inconel 718 produced by selective laser melting: microstructure and mechanical properties10.1016/j.msea.2019.02.046 ↗
27. Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718
28. Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy10.1016/j.matlet.2016.10.118 ↗
29. Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: a comparative study10.1016/j.matdes.2017.01.065 ↗
30. Effect of heat treatment on niobium segregation of laser-cladded IN718 alloy coating10.1007/s11661-012-1459-z ↗
31. Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing10.1016/j.actamat.2016.03.063 ↗
32. Control of Laves phase in Inconel 718 GTA welds with current pulsing10.1179/136217104225021788 ↗
33. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
34. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗