Radio frequency O2-plasma treatment of carbon felts: stoichiometric insight into C1s and O1s XPS with correlated Raman and SEM characterization
Source abstract
Abstract
Surface functionalization of carbon plays a key role in tailoring their interfacial properties for applications in energy storage, energy conversion, structural composites, etc. In this work, radio frequency (RF) O 2 -plasma was employed to tailor the surface chemistry of C-felts. The influence of plasma power and treatment duration was studied. X-ray photoelectron spectroscopy (XPS) revealed that oxygen incorporation increases upon plasma treatment with powers up to 100 W, decreasing the C/O ratio significantly, followed by partial recovery at higher powers due to ion-induced etching. High-resolution C1s and O1s spectra were deconvoluted using a stoichiometric correlation strategy to improve peak assignments. Despite the inherent complexity of O1s spectra due to peak overlap and symmetric features, a consistent interpretation was achieved. Hence, by providing a stoichiometry-driven framework we improve the accuracy and consistency of XPS analysis by correlating the deconvolution of high-resolution C1s and O1s spectra. Raman spectroscopy confirmed the progressive increase in structural defects, with higher plasma powers and longer exposures. Scanning electron microscopy (SEM) revealed pronounced surface roughening and fiber etching after plasma. Overall, this work provides a deeper insight into surface modification of carbon felt utilizing O 2 -plasma and establishes a stoichiometric framework for interpreting complex XPS spectra of oxygen-functionalized carbons.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Carbon foams: 3D porous carbon materials holding immense potential10.1039/D0TA08749A ↗
2. Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study10.1039/D4RA01380H ↗
3. Coffee waste-derived nanoporous carbons for hydrogen storage10.1021/acsaem.2c01573 ↗
4. Surface functionalization of activated carbon: coupling of 3-(Aminopropyl)trimethoxysilane and (3-glycidyloxypropyl)trimethoxysilane
5. Design of experiments as a tool to guide the preparation of tailor-made activated carbons10.1038/s41598-023-30642-8 ↗
6. Influence of plasma treatment on electrochemical activity of Ni (o)-based catalyst for hydrogen production by hydrolysis of NaBH410.1016/j.jpowsour.2013.05.036 ↗
7. Overview on the surface functionalization mechanism and determination of surface functional groups of plasma treated carbon nanotubes10.1080/10408347.2017.1356699 ↗
8. Effects of oxygen plasma treatment power on surface properties of poly(p-phenylene benzobisoxazole) fibers10.1016/j.apsusc.2008.09.014 ↗
9. Macromolecular plasma-chemistry: an emerging field of polymer science10.1016/j.progpolymsci.2004.05.001 ↗
10. Investigation into the differences between atomic oxygen erosion yields of materials in ground-based facilities and LEO10.1177/0954008308089711 ↗
11. Covalent introduction of plasma-treated carbon nanotubes into polyimide nanocomposites at ultra-low content10.1016/j.eurpolymj.2023.112609 ↗
12. Post-plasma oxidation in water of graphene paper surface10.1016/j.carbon.2022.07.031 ↗
13. Enhancing graphene nanoplatelet reactivity through low-temperature plasma modification10.1021/acsami.4c01226 ↗
14. Aging of plasma-activated carbon surfaces: challenges and opportunities10.1016/j.apsusc.2021.150362 ↗
15. Tuning the reactivity of carbon surfaces with oxygen-containing functional groups10.1038/s41467-023-37962-3 ↗
16. Characterizing graphitic carbon with X‐ray photoelectron spectroscopy: a step‐by‐step approach10.1002/cctc.201500344 ↗
17. The interpretation of XPS spectra: Insights into materials properties10.1016/j.surfrep.2013.03.001 ↗
18. Avoiding common errors in X-ray photoelectron spectroscopy data collection and analysis, and properly reporting instrument parameters10.1016/j.apsadv.2023.100534 ↗
19. On the wrong assignment of the XPS O1s signal at 531–532 eV attributed to oxygen vacancies in photo- and electro-catalysts for water splitting and other materials applications10.1016/j.susc.2021.121894 ↗
20. Comments on the XPS analysis of carbon materials
21. Application of design of experiments (DoE) for optimised production of micro- and mesoporous Norway spruce bark activated carbons10.1007/s13399-021-01917-9 ↗
22. Converting furfural residue wastes to carbon materials for high performance supercapacitor
23. Introduction to topical collection: reproducibility challenges and solutions with a focus on guides to XPS analysis
24. Correlation of C1s chemical state intensities with the O1s intensity in the XPS analysis of anodically oxidized glass-like carbon samples10.1023/A:1004761103919 ↗
25. The use and misuse of curve fitting in the analysis of core X‐ray photoelectron spectroscopic data
26. Introductory guide to backgrounds in XPS spectra and their impact on determining peak intensities
27. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
28. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
29. Probing the nature of defects in graphene by Raman spectroscopy10.1021/nl300901a ↗
30. Thermal stability and reducibility of oxygen-containing functional groups on multiwalled carbon nanotube surfaces: a quantitative high-resolution XPS and TPD/TPR study10.1021/jp804413a ↗
31. Accurate chemical analysis of oxygenated graphene-based materials using X-ray photoelectron spectroscopy10.1016/j.carbon.2018.11.012 ↗
32. Improving the deconvolution and interpretation of XPS spectra from chars by ab initio calculations10.1016/j.carbon.2016.09.012 ↗
33. XPS study of carbon fiber surfaces treated by thermal oxidation in a gas mixture of O2/(O2+N2)10.1016/S0169-4332(00)00558-4 ↗
34. High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database (Beamson, G; Briggs, D.). J. Chem. Educ. 1993;70(1):A25. doi:10.1021/ed070pA25.5.10.1021/ed070pA25.5 ↗
35. The characterization of activated carbons with oxygen and nitrogen surface groups10.1016/S0008-6223(97)00096-1 ↗
36. Probing the chemical nature of surface oxides during coal char oxidation by high-resolution XPS10.1016/j.carbon.2015.04.003 ↗
37. Nitric acid oxidation of vapor grown carbon nanofibers10.1016/j.carbon.2004.04.040 ↗
38. Reactivity of mesoporous carbon against water – an in-situ XPS study10.1016/j.carbon.2014.05.019 ↗
39. Practical guide for curve fitting in x-ray photoelectron spectroscopy
40. Calibration of binding energy positions with C1s for XPS results10.1007/s11595-020-2312-7 ↗
41. XPS insights: asymmetric peak shapes in XPS
42. Novel effects of surface modification on activated carbon fibers using a low pressure plasma treatment10.1021/jp065907j ↗
43. Modifications produced by O2 plasma treatments on a mesoporous glassy carbon10.1016/S0008-6223(99)00136-0 ↗
44. Graphene and graphene oxide (raman spectroscopy)
45. Quantifying ion-induced defects and Raman relaxation length in graphene10.1016/j.carbon.2009.12.057 ↗
46. Dynamic of the structural alteration of biochar in ancient Anthrosol over a long timescale by Raman spectroscopy10.1371/journal.pone.0229447 ↗
47. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
48. The importance of interbands on the interpretation of the raman spectrum of graphene oxide10.1021/acs.jpcc.5b01590 ↗
49. Effects of atmospheric air plasma treatment of graphite and carbon felt electrodes on the anodic current from Shewanella attached cells10.1016/j.bioelechem.2015.03.011 ↗
50. Tunable oxygen functional groups as electrocatalysts on graphite felt surfaces for all-vanadium flow batteries10.1002/cssc.201600198 ↗