journal article·2017-05

Flaw detection in powder bed fusion using optical imaging

Mostafa Abdelrahman, Edward W. Reutzel, Abdalla R. Nassar, Thomas L. Starr

Publisher page

Abstract

Abstract Lack-of-fusion flaws can occur in powder bed fusion (PBF) additive manufacturing of metal components. This paper demonstrates a method for detecting such flaws by monitoring the fabrication of every layer before and after laser scanning with high resolution optical imaging. A binary template is created from the sliced 3D model of the part. Using this template the optical image data is indexed to the part geometry. The indexed image data is used to detect anomalies in the powder layer before laser scanning and in the solidified material after scanning. Lack-of-fusion defects are identified from optical data by correlating multiple images with different lighting conditions and from multiple layers. To test the algorithms intentional defects are created inside a test part at different locations and are successfully detected with a high true positive rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
2. Metallic additive manufacturing: state-of-the-art review and prospects10.1051/meca/2012003 ↗
3. Thermal model of the build environment for polyamide powder selective laser sintering
4. Process monitoring in laser sintering using thermal imaging
5. Integration of a thermal imaging feedback control system in electron beam melting
6. Vision-based process monitoring for laser metal deposition processes
7. Optical system for on-line monitoring and temperature control in selective laser melting technology10.4028/www.scientific.net/KEM.437.458 ↗
8. On-line temperature monitoring in selective laser sintering/melting10.1016/j.phpro.2010.08.079 ↗
9. Comprehensive optical monitoring of selective laser melting
10. A review on process monitoring and control in metal-based additive manufacturing10.1115/1.4028540 ↗
11. Determination of geometrical factors in layerwise laser melting using optical process monitoring10.1016/j.optlaseng.2011.06.016 ↗
12. Online quality control of selective laser melting
13. Feedback control of layerwise laser melting using optical sensors10.1016/j.phpro.2010.08.078 ↗
14. Detection of process failures in layerwise laser melting with optical process monitoring10.1016/j.phpro.2012.10.097 ↗
15. High resolution imaging for inspection of laser beam melting systems
16. Elevated region area measurement for quantitative analysis of laser beam melting process stability
17. In situ flaw detection by IR-imaging during electron beam melting10.1108/13552541211231572 ↗
18. Optical, layerwise monitoring of powder bed fusion
19. Layerwise monitoring of polymer laser sintering using thermal imaging
20. Feedforward control for polymer laser sintering process using part geometry
21. Quality certification and control of polymer laser sintering: layerwise temperature monitoring using thermal imaging
22. A level set algorithm for minimizing the Mumford–Shah functional in image processing
23. A level set method for image segmentation in the presence of intensity inhomogeneities with application to MRI
24. Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
25. Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting10.1016/j.matdes.2015.07.147 ↗
26. An introduction to ROC analysis10.1016/j.patrec.2005.10.010 ↗