journal article·2016-02

Influence of C dopant on the structure, mechanical and tribological properties of r.f.-sputtered MoS2/a-C composite films

Jiao Xu, Liqiang Chai, Li Qiao, Tengfei He, Peng Wang

Publisher page

Abstract

Abstract In present work, MoS2/a-C composite films were synthesized by r.f. sputtering of MoS2 and graphite targets, and the influence of C dopant on the structure, morphology, mechanical and the tribological properties of composite films in vacuum, ambient air and mutually alternated atmospheres were discussed in detail. Increasing the sputtering power applied on graphite target from 0 to 400 W, the film hardness increases significantly by one order of magnitude, and the optimized lubricant performance were obtained at 300 W. After sliding tests the morphology and structure of tribofilm and debris were investigated by using optical spectroscopy and Raman spectroscopy. The results reveal that the adaptive release of non-lubricant phase from tribofilm is a critical issue for determining the tribological performance of MoS2/a-C composite films in different sliding atmospheres. The more exhaustive release of non-lubricant phase, the lower friction of rubbed counterparts can be obtained. More interestingly, the lubricant mechanism of tribofilms formed in alternated atmospheres is partially affected by their initial composition established at the beginning of sliding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Tribological characteristics of magnetron sputtered MoS2 films in various atmospheric conditions10.1007/BF02984425 ↗
2. A comparison of oxidation and oxygen substitution in MoS2 solid film lubricants10.1016/S0301-679X(99)00088-2 ↗
3. Surface and subsurface contributions of oxidation and moisture to room temperature friction of molybdenum disulfide10.1007/s11249-013-0273-0 ↗
4. Tribological properties of Cr- and Ti-doped MoS2 composite coatings under different humidity atmosphere
5. Composition and structure-property relationship of low friction, wear resistant TiN–MoSx composite coating deposited by pulsed closed-field unbalanced magnetron sputtering10.1016/j.surfcoat.2008.11.004 ↗
6. Deposition of CrN–MoS2 thin films by D.C. magnetron sputtering10.1016/j.surfcoat.2004.08.013 ↗
7. Structural, mechanical and tribological properties of Mo–S–C solid lubricant coating10.1016/j.surfcoat.2010.11.043 ↗
8. Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon10.1016/j.surfcoat.2011.03.004 ↗
9. Amorphous self-lubricant MoS2-C sputtered coating with high hardness10.1016/j.apsusc.2015.01.057 ↗
10. Structure, mechanical, and tribological properties of MoS2/a-C:H composite films10.1007/s11249-013-0216-9 ↗
11. Friction of self-lubricating W-S-C sputtered coatings sliding under increasing load10.1002/ppap.200731402 ↗
12. Mechanical behaviour of W–S–N and W–S–C sputtered coatings deposited with a Ti interlayer10.1016/S0257-8972(02)00622-9 ↗
13. W–S–C sputtered films: influence of the carbon alloying method on the mechanical properties10.1016/j.surfcoat.2005.02.039 ↗
14. Tribological behaviour of N(C)-alloyed W–S films10.1007/s11249-007-9248-3 ↗
15. The influence of the addition of C and N on the wear behavior of W-S-C/N coatings10.1016/S0257-8972(01)01249-X ↗
16. Nanoscale triboactivity: the response of Mo–Se–C coatings to sliding10.1016/j.actamat.2008.06.029 ↗
17. Tribological behavior of WC/DLC/WS2 nanocomposite coatings10.1016/j.surfcoat.2004.07.079 ↗
18. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
19. The quantitative analysis of thin specimens10.1111/j.1365-2818.1975.tb03895.x ↗
20. The use of Raman scattering to study disorder in pulsed laser deposited MoS2 films10.1016/0040-6090(94)90698-X ↗
21. Disorder-induced low-frequency Raman band observed in deposited MoS2 films10.1366/000370294774369063 ↗
22. Utilization of Raman spectroscopy in tribochemistry studies10.1016/0043-1648(93)90280-Y ↗
23. MoS2 nanoparticles decorating titanate-nanotube surfaces: combined microscopy, spectroscopy, and catalytic studies10.1021/acs.langmuir.5b00396 ↗
24. Model oxide supported MoS2 HDS catalysts: structure and surface properties10.1039/c0cy00050g ↗
25. Anomalous lattice vibrations of single and few-layer MoS210.1021/nn1003937 ↗
26. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
27. The tribological properties of MoS2 coatings in vacuum, low relative-humidity, and high relative-humidity environments10.1116/1.575669 ↗
28. Surface oxidation of molybdenum disulfide10.1021/j150531a020 ↗
29. Effect of water vapor on friction of molybdenum disulfide10.1021/i160019a010 ↗
30. Effects of crystallite orientation on environmental stability and lubrication properties of sputtered MoS2 thin films10.1080/05698198408981548 ↗
31. The effects of environmental water and oxygen on the temperature-dependent friction of sputtered molybdenum disulfide10.1007/s11249-013-0233-8 ↗
32. Towards an optimized sputtered MoS2 lubricant film
33. Colbert · 2012
34. A study of the lubricating mechanism of molybdenum disulfide10.1016/0043-1648(72)90124-X ↗
35. Evolution of transfer layers on steel balls sliding against hydrogenated amorphous carbon coatings in ambient air10.1016/j.triboint.2013.09.007 ↗