journal article·2016-12

Surface characteristics of Ti–6Al–4V alloy by EDM with Cu–SiC composite electrode

L. Li, L. Feng, X. Bai, Z.Y. Li

Publisher page

Abstract

Abstract Ti–6Al–4V alloy is widely used in many industries due to its outstanding properties. However, it has poor machinability using conventional mechanical cutting process. Electrical discharge machining is an alternative competitive process to machine titanium alloy by electrical erosion. This article studies the machining characteristics of Ti–6Al–4V with Cu–SiC composite electrode. Surface topography, subsurface microstructure, energy dispersive spectroscopy analysis, and micro-hardness have been analyzed. The machined surfaces show irregular compound structures, droplets of debris, shallow craters, and micro-pores. The surfaces processed by Cu–SiC electrode have fewer number of microcracks compared with that by Cu electrode. Continuous and uniform hardened layer can be achieved by Cu–SiC electrode. The hardened layer has significantly higher hardness than the bulk material because the new phases of TiC and TiSi 2 were created on the surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Study on improved tribological properties by alloying copper to CP-Ti and Ti–6Al–4V alloy10.1016/j.msec.2015.07.046 ↗
2. Effect of the alpha grain size on the deformation behavior during isothermal compression of Ti–6Al–4V alloy10.1016/j.matdes.2015.08.130 ↗
3. Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach10.1016/j.ijrmhm.2015.07.027 ↗
4. Friction surfacing of Ti–6Al–4V: Process characteristics and deposition behaviour at various rotational speeds10.1016/j.surfcoat.2015.07.039 ↗
5. Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide10.1016/j.apsusc.2013.03.161 ↗
6. Study of the recast layer of a surface machined bysinking electrical discharge machining using water-in-oil emulsion as dielectric10.1016/j.apsusc.2011.01.083 ↗
7. Workpiece surface roughness and integrity after WEDM of Ti-6Al-4V and Inconel 718 using minimum damage generator technology10.1016/j.cirp.2008.03.054 ↗
8. Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM)10.1080/10426914.2013.852211 ↗
9. Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension10.1016/j.apsusc.2012.03.054 ↗
10. Effect of dielectric fluid with surfactant and graphite powder on electrical discharge machining of titanium alloy using Taguchi method10.1016/j.jestch.2015.03.009 ↗
11. Research developments in additives mixed electrical discharge machining (AEDM): A state of art review10.1080/10426914.2010.502954 ↗
12. Experimental investigation on surface characteristics in powder-mixed electrode discharge machining of AA6061/10%SiC composite10.1080/10426914.2014.880463 ↗
13. Effect of mixed powder ultrasonic vibration on surface structure and mechanical properties of Ti-6Al-4V in electro-discharge machining
14. Dimensional accuracy studies of copper shells used for electro-discharge machining electrodes made with rapid prototyping and the electroforming process10.1016/j.jmatprotec.2003.11.009 ↗
15. Effect of tool electrode resolidification on surface hardness in electrical discharge machining10.1080/10426914.2014.930956 ↗