Process optimization and characterization of dense pure copper parts produced by paste-based 3D micro-extrusion
Source abstract
Abstract
The manufacturing of dense pure Cu components by 3D micro-extrusion, a Material Extrusion (MEX) Additive Manufacturing (AM) technology, was investigated. This technology is based on the extrusion of a highly viscous powder-loaded suspension or paste at room temperature. The present study focused on the development of a complete processing route for 3D micro-extrusion from feedstock paste formulation, optimization of printing parameters, and thermal post-processing conditions. A propanol-based feedstock paste with 95 wt% Cu powder loading was prepared by employing optimized mixing and degassing steps to produce ∼98% dense Cu after pressureless sintering in pure H2 atmosphere at 1050 °C for 5 h. Printing of green parts by 3D micro-extrusion of the developed paste with optimized printing parameters followed by the same post-processing conditions enabled the fabrication of 96–99% dense Cu components with high purity. Microstructural investigation of the paste and printed parts after thermal treatment revealed the presence of residual isolated spherical pores (<10 µm) distributed within the grains, at the grain boundaries and in triple junctions. The final material has an electrical conductivity in the range 90–100 %IACS, a yield strength of 61 ± 7 MPa, an ultimate tensile strength of 194 ± 9 MPa and an elongation at fracture of 32 ± 4%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Opportunities for heat exchanger applications in environmental systems10.1016/S1359-4311(99)00045-9 ↗
2. Lei · 2016
3. A comprehensive review of additive manufacturing in construction of electrical machines10.1109/TEC.2020.2964942 ↗
4. Additive manufacturing of copper and copper alloys
5. Solid-state additive manufacturing for heat exchangers10.1007/s11837-015-1299-6 ↗
6. Influence of selective laser melting process parameters on texture evolution in pure copper10.1016/j.jmatprotec.2019.02.022 ↗
7. Physical and geometrical properties of additively manufactured pure copper samples using a green laser source10.3390/ma14133642 ↗
8. Mechanical and electrical properties of selective laser-melted parts produced from surface-oxidized copper powder
9. High-precision laser powder bed fusion processing of pure copper
10. Microstructure and mechanical properties of pure copper manufactured by selective laser melting10.1016/j.msea.2020.139615 ↗
11. Laser-based powder bed fusion additive manufacturing of pure copper
12. Thermal and electrical conductivity of 99.9% pure copper processed via selective electron beam melting10.1002/adem.201600078 ↗
13. Process development for the manufacturing of 99.94% pure copper via selective electron beam melting10.1016/j.matlet.2014.12.105 ↗
14. Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties10.1016/j.matchar.2018.04.009 ↗
15. An exploration of binder jetting of copper10.1108/RPJ-12-2014-0180 ↗
16. Impacts of process-induced porosity on material properties of copper made by binder jetting additive manufacturing10.1016/j.matdes.2019.108001 ↗
17. Rapid manufacturing of copper components using 3D printing and ultrasonic assisted pressureless sintering: experimental investigations and process optimization10.1016/j.jmapro.2019.05.010 ↗
18. Additive manufacturing of copper-ABS filament by fused deposition modeling (FDM)
19. Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing
20. Influence of binder composition and material extrusion (mex) parameters on the 3D printing of highly filled copper feedstocks
21. Mechanical, electrical, and thermal characterization of pure copper parts manufactured via material extrusion additive manufacturing10.3390/ma15134644 ↗
22. Process parameter optimization of extrusion-based 3D metal printing utilizing PW-LDPE-SA binder system10.3390/ma10030305 ↗
23. G. Singh, J.-M. Missiaen, D. Bouvard, J.-M. Chaix, Copper additive manufacturing using MIM feedstock: adjustment of printing, debinding, and sintering parameters for processing dense and defectless parts, (n.d.). https://doi.org/10.1007/s00170–021-07188-y/Published.
24. Innovative 3D-manufacture of structured copper supports post-coated with catalytic material for CO2 methanation10.1016/j.cep.2018.03.023 ↗
25. Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method10.1039/C7RA13149F ↗
26. Fabrication of 3D printed metal structures by use of high-viscosity cu paste and a screw extruder10.1007/s11664-014-3601-8 ↗
27. Optimization of extrusion based ceramic 3D printing process for complex bony designs10.1016/j.matdes.2018.11.054 ↗
28. E. Udofia, E.N. Udofia, W. Zhou, Microextrusion Based 3D Printing-A Review Production of 3-D Geometric Models with Aluminium Scraps Using CAD/CAM Systems View project Microheater Array Powder Sintering View project Microextrusion Based 3D Printing-A Review, n.d. 〈https://www.researchgate.net/publication/335430080〉.
29. A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer
30. Robocasting of structural ceramic parts with hydrogel inks10.1016/j.jeurceramsoc.2016.03.001 ↗
31. State of the art of additively manufactured electromagnetic materials for topology optimized electrical machines
32. Rheological characterisation of ceramic inks for 3D direct ink writing: a review10.1016/j.jeurceramsoc.2021.08.031 ↗
33. Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes10.1007/s00170-015-7720-z ↗
34. Davis · 2001