Improved microwave shielding behavior of carbon nanotube-coated PET fabric using plasma technology
Source abstract
Abstract
Abstract Four different procedures were conducted to load amine functionalized multiwall carbon nanotube (NH 2 -MWCNT) onto poly (ethylene terephthalate) (PET) fabric surface to obtain a microwave shielding sample. Plasma treated fabric which was subsequently coated with NH 2 -MWCNT in the presence of acrylic acid was chosen as the best sample. Surface changes in the PET fabrics were investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Wide-angle X-ray diffraction was used to study the crystalline structure of the PET fabric. The microwave shielding performance of the PET fabrics in term of reflection loss was determined using a network analyzer at X-band (8.2–12.4 GHz). The XPS results revealed that the carbon atomic percentage decreased while the oxygen atomic percentage increased when the fabric was plasma treated and coated with NH 2 -MWCNT. The SEM images showed that the NH 2 -MWCNTs were homogenously dispersed and individually separated in the surface of fabric. Moreover, the structural studies showed that the crystalline region of the fabrics was not affected by NH 2 -MWCNT and plasma treatment. The best microwave absorbing properties were obtained from the plasma treated fabric which was then coated with 10% NH 2 -MWCNT in the presence of acrylic acid. It showed a minimum reflection loss of ∼−18.2 dB about 11 GHz. Proper attachments of NH 2 -MWCNT on the PET fabric surface was explained in the suggested mechanism in which hydrogen bonding and amide linkage are responsible for the achievement of microwave shielding properties with high durability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Flame retardant materials and properties · Advanced Antenna and Metasurface Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Characterization of electromagnetic shielding fabrics obtained from carbon nanotube composite coatings10.1016/j.synthmet.2013.10.003 ↗
2. Electromagnetic shielding characteristics of woven fabrics made of hybrid yarns containing metal wire10.1007/s12221-012-0063-6 ↗
3. Electromagnetic shielding effectiveness of polyester fabrics with polyaniline deposition10.1177/0040517513515316 ↗
4. Shielding effectiveness of conducting polyaniline coated fabrics at 101GHz10.1016/S0379-6779(01)00478-7 ↗
5. Shielding behaviour of conducting polymer-coated fabrics in X-band, W-band and radio frequency range10.1016/S0379-6779(02)00079-6 ↗
6. Microwave absorption properties of fabric coated absorbing material using modified carbonyl iron power10.1016/j.compositesb.2011.02.019 ↗
7. Improved electromagnetic interference shielding response of poly(aniline)-coated fabrics containing dielectric and magnetic nanoparticles10.1021/jp302131w ↗
8. Electromechanical properties of CNT-coated cotton yarn for electronic textile applications10.1088/0964-1726/20/1/015004 ↗
9. Smart electronic yarns and wearable fabrics for human biomonitoring made by carbon nanotube coating with polyelectrolytes10.1021/nl801495p ↗
10. Conducting textiles from single-walled carbon nanotubes10.1016/j.synthmet.2007.04.010 ↗
11. Electrically conductive yarns based on PVA/carbon nanotubes10.1016/j.compstruct.2005.10.016 ↗
12. The effect of plasma modification on the sheet resistance of nylon fabrics coated with carbon nanotubes10.1016/j.apsusc.2012.05.023 ↗
13. Electrically high-conductive textiles10.1016/j.synthmet.2009.03.021 ↗
14. Polyaniline coated conducting fabrics. Chemical and electrochemical characterization
15. Flexible electromagnetic interference shields in S band region from textile materials10.1177/1528083712452898 ↗
16. Controlling the wettability properties of polyester fibers using grafted functional nanomaterials10.1039/c1jm10823a ↗
17. Atmospheric air-plasma treatment of polyester fiber to improve the performance of nanoemulsion silicone10.1016/j.apsusc.2010.11.175 ↗
18. Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization10.1016/j.surfcoat.2010.05.038 ↗
19. Surface modification of PET films by atmospheric pressure plasma exposure with three reactive gas sources10.1007/s00396-012-2600-7 ↗
20. Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films10.1002/app.1749 ↗
21. Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films: characterization and human smooth muscle cell growth on grafted films10.1016/S0142-9612(01)00195-8 ↗
22. Electronic properties of carbon nanotube/fabric composites10.1016/j.cap.2005.09.001 ↗
23. Stretchable, porous, and conductive energy textiles10.1021/nl903949m ↗
24. Wettability of poly(ethylene terephthalate) film treated with low-temperature plasma and their surface analysis by ESCA10.1002/(SICI)1097-4628(19990606)72:10<1327::AID-APP13>3.0.CO;2-0 ↗
25. Surface modification of poly(ethylene terephthalate) fibers induced by radio frequency air plasma treatment10.1016/S0169-4332(03)00265-4 ↗
26. Surface properties and the stability of poly(ethylene terephtalate) films treated in plasmas of helium–oxygen mixtures10.1002/(SICI)1097-4628(19971114)66:7<1367::AID-APP15>3.0.CO;2-# ↗
27. Surface treatment of natural and synthetic textiles using a dielectric barrier discharge10.1016/j.surfcoat.2006.06.021 ↗
28. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs10.1016/j.carbon.2004.08.033 ↗
29. Ghosh · 1983
30. Highly conductive and transparent carbon nanotube composite thin films deposited on polyethylene terephthalate solution dipping10.1016/j.tsf.2009.11.021 ↗
31. Microwave absorption by polyaniline–carbon nanotube composites10.1016/j.synthmet.2005.05.019 ↗
32. Electromagnetic Interference (EMI) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗