Friction and wear performance of some thermoplastic polymers and polymer composites against unsaturated polyester
Source abstract
Abstract
Abstract Wear experiments have been carried out with a range of unfilled and filled engineering thermoplastic polymers sliding against a 15% glass fibre reinforced unsaturated polyester polymer under 20, 40 and 60 N loads and 0.5 m/s sliding speed. Pin materials used in this experimental investigation are polyamide 66 (PA 66), poly-ether-ether-ketone (PEEK) and aliphatic polyketone (APK), glass fibre reinforced polyamide 46 (PA 46 + 30% GFR), glass fibre reinforced polytetrafluoroethylene (PTFE + 17% GFR), glass fibre reinforced poly-ether-ether-ketone (PEEK + 20% GFR), glass fibre reinforced poly-phylene-sulfide (PPS + 30% GFR), polytetrafluoroethylene filled polyamide 66 (PA 66 + 10% PTFE) and bronze filled pofytetrafluoroethylene (PTFE + 25% bronze) engineering polymers. The disc material is a 15% glass fibre reinforced unsaturated polyester thermoset polymer produced by Bulk Moulding Compound (BMC). Sliding wear tests were carried out on a pin-on-disc apparatus under 0.5 m/s sliding speed and load values of 20, 40 and 60 N. The results showed that the highest specific wear rate is for PPS + 30% GFR with a value of 1 × 10 −11 m 2 /N and the lowest wear rate is for PTFE + 17% GFR with a value of 9.41 × 10 −15 m 2 /N. For the materials and test conditions of this investigation, apart from polyamide 66 and PA 46 + 30% GFR polymers, the coefficient of friction and specific wear rates are not significantly affected by the change in load value. For polyamide 66 and PA 46 + 30% GFR polymers the coefficient of friction and specific wear rates vary linearly with the variation in load values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Lewis · Lubr. Eng. · 1986 · 42 · 152
2. Blanchet · Tribol. Trans. · 1991 · 34 · 32710.1080/10402009108982041 ↗
3. Tanaka · Wear · 1982 · 79 · 22110.1016/0043-1648(82)90170-3 ↗
4. Bijwe · Wear · 1990 · 138 · 7710.1016/0043-1648(90)90169-B ↗
5. Bahadur · Wear · 1984 · 98 · 110.1016/0043-1648(84)90213-8 ↗
6. Cogswell · 1992
7. 1986 · vol. 1
8. 1993
9. Stolarski · J. Appl. Polym. Sci. · 1993 · 48 · 89710.1002/app.1993.070480514 ↗
10. Kurokawa · Tribol. Int. · 2000 · 33 · 71510.1016/S0301-679X(00)00111-0 ↗
11. Ovaert · Wear · 1991 · 150 · 27510.1016/0043-1648(91)90323-M ↗
12. Hanchi · Tribol. Trans. · 1995 · 38 · 30510.1080/10402009508983409 ↗
13. Ovaert · Tribol. Trans. · 1997 · 40 · 44510.1080/10402009708983679 ↗
14. Tribology of polyetheretherketone10.1016/0043-1648(92)90031-3 ↗
15. Ovaert · J. Tribol. · 1991 · 113 · 15010.1115/1.2920581 ↗
16. Hanchi · Tribol. Trans. · 1994 · 37 · 49410.1080/10402009408983322 ↗
17. The wear of polymers
18. Bhushan · Wear · 1982 · 75 · 4110.1016/0043-1648(82)90139-9 ↗
19. Hanmin · Wear · 1987 · 116 · 5910.1016/0043-1648(87)90267-5 ↗
20. Hanmin · Wear · 1987 · 116 · 6910.1016/0043-1648(87)90268-7 ↗
21. Zhao · Wear · 1998 · 217 · 6210.1016/S0043-1648(98)00155-0 ↗
22. Hutchings · 1992
23. Tewari · Rev. Macromol. Chem. Phys. · 1989 · C29 · 110.1080/07366578908055162 ↗
24. Yamaguchi · 1990
25. Hooke · Wear · 1996 · 200 · 8310.1016/S0043-1648(96)07270-5 ↗
26. Lawrence · Wear · 1989 · 132 · 8310.1016/0043-1648(89)90211-1 ↗
27. Santner · Tribol. Int. · 1989 · 22 · 10310.1016/0301-679X(89)90170-9 ↗
28. Unal · Mater. Des. · 2003 · 24 · 18310.1016/S0261-3069(03)00018-9 ↗
29. Brentnall · 1989 · 596
30. Da Silva · Wear · 1999 · 225–229 · 33910.1016/S0043-1648(98)00365-2 ↗
31. Ludema · Wear · 1966 · 9 · 32910.1016/0043-1648(66)90018-4 ↗
32. Watanabe · Wear · 1968 · 110 · 37910.1016/0043-1648(86)90111-0 ↗
33. Tanaka · Wear · 1982 · 27 · 18310.1016/0043-1648(82)90147-8 ↗
34. Bahadur · 1985 · 253
35. Hu · Polym. Plast. Technol. Eng. · 2000 · 39 · 13710.1081/PPT-100100020 ↗