journal article·2024-03Open access

Cyclodextrins in 3D/4D printing for biomedical applications

Carmen Alvarez-Lorenzo, Alvaro Goyanes, Angel Concheiro

Abstract

Additive manufacturing is one of the key technologies behind recent industrial revolutions. Mass customization requires production techniques that can meet current needs for human-centricity, sustainability, and resiliency. Furthermore, for biomedical applications and personalized medicine, 3D printing demands advanced materials that can respond to the processing requirements of each technique but that are at the same time biocompatible, biofunctional and bioeliminable. Cyclodextrins (CDs) have only recently been explored as components of 3D printed objects despite the variety of functionalities they can offer. Considered safe for most administration routes, these macrocyclic oligosaccharides possess a unique capability to host a wide variety of substances, ranging from small drugs and biomarkers to large peptides and polymers, and can be versatilely functionalized at their numerous hydroxyl groups. Although still underexplored, these capabilities could be transferred to 3D printed structures. The aim of this review is to analyze the contribution of CDs to make 3D/4D printing more sustainable and provide printed objects with novel features. The information collected from the papers published in the last decade has been organized into three sections: CDs to improve drug biopharmaceutical properties and controlled release; CDs as structural agents of 3D printed objects; and CDs as responsive agents for 4D printing and wearable sensors. The obtained results confirm the suitability of CDs to be processed using a variety of 3D printing techniques and to provide new nano-scale tunable architectures, with permanent or stimuli-transient conformations. CDs can expand 3D printing to lipophilic compounds that form inclusion complexes during the preparation of water-based semisolid masses or the melting of filaments or powders. Furthermore, CDs offer several advantages as structural components by forming reversible supramolecular assemblies that exhibit self-healing properties and by facilitating photocross-linking reactions in aqueous environments acting as initiator solubilizer and building blocks. Additionally, CDs can provide 4D behavior through sensitivity to humidity, temperature, pH, ionic strength, and external forces. Overall, CDs can enable 3D printed objects to meet widely varying mechanical, electrical, and drug delivery demands.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A systematic literature review: Industry 4.0 based monitoring and control systems in additive manufacturing10.3390/machines11070712 ↗
2. Breque M., De Nul L., Petridis A. Industry 5.0: Towards a sustainable, humancentric and resilient European industry. European Commision 2021. 〈https://msu.euramet.org/current_calls/documents/EC_Industry5.0.pdf〉.
3. Industry 5.0: Prospect and retrospect10.1016/j.jmsy.2022.09.017 ↗
4. Industry 5.0 technology capabilities in Trauma and Orthopaedics10.1016/j.jor.2022.06.001 ↗
5. Industry 5.0 and its expected applications in medical field10.1016/j.cmrp.2019.07.002 ↗
6. Industry 5.0 in Orthopaedics10.1007/s43465-022-00712-6 ↗
7. Impact assessment of additive manufacturing on sustainable business models in Industry 4.0 context10.3390/su12177066 ↗
8. Achieving sustainability in manufacturing through additive manufacturing: An analysis of its enablers10.3390/su15129504 ↗
9. Limb prostheses: Industry 1.0 to 4.0: Perspectives on technological advances in prosthetic care10.3389/fresc.2022.854404 ↗
10. A case study on decentralized manufacturing of 3D printed medicines
11. Three-dimensional printing of medicinal products and the challenge of personalized therapy10.1016/j.xphs.2017.03.021 ↗
12. A review of state-of-the-art on enabling additive manufacturing processes for precision medicine10.1115/1.4056199 ↗
13. Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients10.1016/j.ijpharm.2019.118497 ↗
14. The clinical use of 3D printing in surgery10.1007/s13304-018-0586-5 ↗
15. 3D printing surgical phantoms and their role in the visualization of medical procedures
16. Clinical study of 3D printed personalized prosthesis in the treatment of bone defect after pelvic tumor resection
17. Additive manufacturing in orthopedics: A Review10.1021/acsbiomaterials.1c01072 ↗
18. Anti-biofilm multi drug-loaded 3D printed hearing aids10.1016/j.msec.2020.111606 ↗
19. Significant capabilities of SMART sensor technology and their applications for Industry 4.0 in trauma and orthopaedics
20. Advances and future perspectives in 4D bioprinting10.1002/biot.201800148 ↗
21. 5D printing and its expected applications in Orthopaedics10.1016/j.jcot.2018.11.014 ↗
22. Concept of 5D printing technology and its applicability in the healthcare industry10.1016/j.matpr.2021.10.391 ↗
23. Cornelius K. Contact lenses are a surprising source of pollution. Scientific American, August 20, 2018. 〈https://www.scientificamerican.com/article/contact-lenses-are-a-surprising-source-of-pollution/〉; Accessed August 2023.
24. Assessment of the environmental impacts of medical devices: a review10.1007/s10668-020-01086-1 ↗
25. FDA. Working Together to Improve Reusable Medical Device Reprocessing. 2022. 〈https://www.fda.gov/medical-devices/reprocessing-reusable-medical-devices/working-together-improve-reusable-medical-device-reprocessing〉; Accessed August 2023.
26. 3D Printing of green and renewable polymeric materials: Toward greener additive manufacturing10.1021/acsapm.2c02171 ↗
27. Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials10.1016/j.matdes.2023.111661 ↗
28. Bacterial cellulose-based materials and medical devices: current state and perspectives10.1007/s00253-011-3432-y ↗
29. 3D printing using plant-derived cellulose and its derivatives: a review10.1016/j.carbpol.2018.09.027 ↗
30. Application of 3D-bioprinted nanocellulose and cellulose derivative-based bio-inks in bone and cartilage tissue engineering
31. 3D printing of biomass-derived composites: application and characterization approaches10.1039/D0RA03620J ↗
32. Recent advances in 3D printed cellulose-based wound dressings: A review on in vitro and in vivo achievements10.1016/j.carbpol.2023.121298 ↗
33. Pharmaceutical applications of cyclodextrins: basic science and product development10.1111/j.2042-7158.2010.01030.x ↗
34. 130 years of cyclodextrin discovery for health, food, agriculture, and the industry: a review10.1007/s10311-020-01156-w ↗
35. Recent list of cyclodextrin-containing drug products10.3311/PPch.21222 ↗
36. Chemically cross-linked and grafted cyclodextrin hydrogels: from nanostructures to drug-eluting medical devices10.1016/j.addr.2013.04.015 ↗
37. Supramolecular cyclodextrin-based drug nanocarriers10.1039/C4CC10388B ↗
38. Recent advances in host-guest supramolecular hydrogels for biomedical applications10.1002/asia.202200608 ↗
39. Advanced supramolecular design for direct ink writing of soft materials10.1039/D2CS01011A ↗
40. Multiacrylated cyclodextrin: A bio-derived photocurable macromer for VAT 3D printing10.1002/mame.202000350 ↗
41. Implementation of Water-soluble cyclodextrin-based polymers in biomedical applications: How far are we?10.1002/mabi.202200090 ↗
42. Modular multifunctional poly(ethylene glycol) hydrogels for stem cell differentiation10.1002/adfm.201201902 ↗
43. Cyclodextrins as versatile building blocks for regenerative medicine10.1016/j.jconrel.2017.10.038 ↗
44. Cyclodextrin-mediated quorum quenching in the Aliivibrio fischeri bioluminescence model system – Modulation of bacterial communication10.1016/j.ijpharm.2020.120150 ↗
45. Dressings loaded with cyclodextrin-hamamelitannin complexes increase Staphylococcus aureus susceptibility toward antibiotics both in single as well as in mixed biofilm communities10.1002/mabi.201500437 ↗
46. Hierarchically templated synthesis of 3D-printed crosslinked cyclodextrins for lycopene harvesting
47. A reproducible, low cost microfluidic microcavity array SERS platform prepared by soft lithography from a 2 photon 3D printed template10.1016/j.snb.2021.129970 ↗
48. Orthogonal covalent and noncovalent functionalization of cyclodextrin-alkyne patterned surfaces10.1021/ja1048658 ↗
49. Quantitative proteomics in translational pharmacokinetics10.1124/pharmrev.121.000449 ↗
50. Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges10.1016/j.jconrel.2021.02.027 ↗
51. Hydroxypropyl-β-cyclodextrin-based fast dissolving carbamazepine printlets prepared by semisolid extrusion 3D printing10.1016/j.carbpol.2019.05.084 ↗
52. Carbamazepine-related antiepileptic drugs for the treatment of epilepsy - a comparative review10.1517/14656566.2016.1168399 ↗
53. Dual encapsulation of β-carotene by β-cyclodextrin and chitosan for 3D printing application10.1016/j.foodchem.2022.132088 ↗
54. Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing10.1016/j.carbpol.2023.121209 ↗
55. Development of food grade 3D printable ink based on pectin containing cannabidiol/cyclodextrin inclusion complexes10.1080/03639045.2020.1791168 ↗
56. Development of bio-active patches based on pectin for the treatment of ulcers and wounds using 3D-bioprinting technology10.3390/pharmaceutics12010056 ↗
57. 3D printing of essential oil/β-cyclodextrin/popping candy modified atmosphere packaging for strawberry preservation10.1016/j.carbpol.2022.120037 ↗
58. Hot-melt extrusion as a continuous manufacturing process to form ternary cyclodextrin inclusion complexes10.1016/j.ejps.2016.09.032 ↗
59. Hot melt-extrusion improves the properties of cyclodextrin-based poly(pseudo)rotaxanes for transdermal formulation10.1016/j.ijpharm.2020.119510 ↗
60. Development of mAb-loaded 3D-printed (FDM) implantable devices based on PLGA10.1016/j.ijpharm.2021.120337 ↗
61. Design and characterization of carboplatin and paclitaxel loaded PCL filaments for 3D printed controlled release intrauterine implants10.3390/pharmaceutics15041154 ↗
62. 3D-Printed drug-loaded composite scaffolds to promote osteogenesis and antibacterial activity10.1021/acsapm.2c00432 ↗
63. Direct cyclodextrin-based powder extrusion 3D printing for one-step production of the BCS class II model drug niclosamide10.1007/s13346-022-01124-7 ↗
64. Direct cyclodextrin based powder extrusion 3D printing of budesonide loaded mini-tablets for the treatment of eosinophilic colitis in paediatric patients10.1016/j.ijpharm.2023.122592 ↗
65. 3D printed mucoadhesive orodispersible films manufactured by direct powder extrusion for personalized clobetasol propionate based paediatric therapies10.1016/j.ijpharm.2023.123214 ↗
66. Mechanical characterization and ex vivo evaluation of anticancer and antiviral drug printed bioadhesive film for the treatment of cervical cancer10.1016/j.ejps.2019.01.030 ↗
67. Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration10.1016/j.ijpharm.2017.04.036 ↗
68. Powder bed fusion: The working process, current applications and opportunities
69. Selective laser sintering 3D printing of orally disintegrating printlets containing ondansetron10.3390/pharmaceutics12020110 ↗
70. Pickering emulsion ink in additive manufacturing: A state-of-the-art review
71. 3D/4d printing of β-cyclodextrin-based high internal phase emulsions10.1016/j.jfoodeng.2023.111455 ↗
72. Utilization of polysaccharide-based high internal phase emulsion for nutraceutical encapsulation and 3D printing: Reinforcement of curcumin stability and bioaccessibility10.1016/j.lwt.2023.115478 ↗
73. Extrusion-based 3D printing of high internal phase emulsions stabilized by co-assembled beta­cyclodextrin and chitosan10.1016/j.foodhyd.2022.108036 ↗
74. Development of emulsion gels stabilized by chitosan and octenyl succinic anhydride-modified β-cyclodextrin complexes for β-carotene digestion and 3D printing10.1021/acs.jafc.3c05632 ↗
75. Modulating hydrophilic properties of β-cyclodextrin/carboxymethyl cellulose colloid particles to stabilize Pickering emulsions for food 3D printing10.1016/j.carbpol.2023.120764 ↗
76. Fabrication of Pickering emulsions stabilized by citrus pectin modified with β-cyclodextrin and its application in 3D printing10.1016/j.carbpol.2023.120833 ↗
77. Pickering emulgels reinforced with host–guest supramolecular inclusion complexes for high fidelity direct ink writing10.1039/D1MH01741A ↗
78. Cyclodextrin-based polyrotaxanes and polypseudorotaxanes as drug delivery carriers10.1016/S1773-2247(13)50080-3 ↗
79. Physicochemical changes of alginate and polyacrylate mixture induced by interactions of the appended units10.1002/macp.202200444 ↗
80. Ring shuttling controls macroscopic motion in a three-dimensional printed polyrotaxane monolith10.1002/anie.201612440 ↗
81. Supramolecular self-healing materials via host-guest strategy between cyclodextrin and specific types of guest molecules10.1016/j.ccr.2020.213711 ↗
82. Recent advances in host-guest supramolecular hydrogels for biomedical applications10.1002/asia.202200608 ↗
83. Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing10.1038/nprot.2017.053 ↗
84. Injectable and cytocompatible tough double-network hydrogels through tandem supramolecular and covalent crosslinking10.1002/adma.201602268 ↗
85. 3D-printable supramolecular hydrogels with shear-thinning property: fabricating strength tunable bioink via dual crosslinking
86. Syringeable Pluronic-α-cyclodextrin supramolecular gels for sustained delivery of vancomycin10.1016/j.ejpb.2011.09.017 ↗
87. Ring shuttling controls macroscopic motion in a three-dimensional printed polyrotaxane monolith10.1002/anie.201612440 ↗
88. Self-assembled hydrogels utilizing polymer–nanoparticle interactions10.1038/ncomms7295 ↗
89. Supramolecular reinforcement of polymer-nanoparticle hydrogels for modular materials design10.1002/adma.202106941 ↗
90. Effect of dimethyl sulfoxide on the binding of 1-adamantane carboxylic acid to β- and γ-cyclodextrins10.1021/acsomega.7b01212 ↗
91. Direct 3D printing of shear-thinning hydrogels into self-healing hydrogels10.1002/adma.201501234 ↗
92. 3D printing of shear-thinning hyaluronic acid hydrogels with secondary cross-linking10.1021/acsbiomaterials.6b00158 ↗
93. A balance between inter- and intra-microgel mechanics governs stem cell viability in injectable dynamic granular hydrogels10.1002/adma.202304212 ↗
94. 3D-printable self-healing and mechanically reinforced hydrogels with host–guest non-covalent interactions integrated into covalently linked networks10.1039/C8MH01208C ↗
95. A rapidly self-healing host–guest supramolecular hydrogel with high mechanical strength and excellent biocompatibility10.1002/anie.201804400 ↗
96. Alginate-based self-healing hydrogels assembled by dual cross-linking strategy: Fabrication and evaluation of mechanical properties10.1016/j.ijbiomac.2021.09.062 ↗
97. Superstructured biomaterials formed by exchange dynamics and host–guest interactions in supramolecular polymers
98. Multimaterial vat polymerization additive manufacturing10.1021/acsapm.1c00262 ↗
99. Volumetric 3D printing for rapid production of medicines
100. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications10.1016/j.jconrel.2020.10.008 ↗