journal article·2022-03

Design optimization of thermally conductive support structure for laser powder-bed fusion process with part-scale thermal history

Kang-Hyun. Lee, Gun Jin Yun

Publisher page

Abstract

Although there has been a substantial volume of research for mitigating the thermally-induced residual stress with the heat accumulation in powder bed fusion (PBF) process, it has been challenging to quantify, access, and optimize the heat dissipation at part-scale. Furthermore, a practical method of designing three-dimensional support with a reasonable index for evaluating inhomogeneous cooling is also of high importance for facilitating the process. In this study, an optimization methodology for designing a thermally conductive lattice support structure is proposed considering the layerwise heating and cooling in the PBF process. A part-scale numerical model with homogenized properties of lattice material is constructed using the temperature-thread multiscale modeling approach to simulate the transient temperature field in PBF process. The transient analysis model is then integrated into the lattice structure topology optimization (LSTO) with the equivalent static loads method (ESLM) based sensitivity analysis to derive the optimal density profile of the support. In particular, a novel concept of the normalized liquid lifetime contour is proposed to analyze the inhomogeneous cooling in PBF process at part-scale. The normalized liquid lifetime is also utilized to build an effective part-scale thermal load to significantly reduce the overall computational cost for the optimization process. The proposed framework is also validated through thermo-mechanical process analysis and experiment for a benchmark case of manufacturing a twin cantilever beam.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Gebhardt · 2016
2. Defect generation and propagation mechanism during additive manufacturing by selective beam melting10.1016/j.jmatprotec.2014.05.002 ↗
3. Additive manufacturing of metallic components–process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
4. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
5. An overview of residual stresses in metal powder bed fusion
6. Overhanging features and the SLM/DMLS residual stresses problem: review and future research need10.3390/technologies5020015 ↗
7. Practical support structures for selective laser melting10.1016/j.jmatprotec.2016.08.006 ↗
8. An innovative method to build support structures with a pulsed laser in the selective laser melting process10.1007/s00170-011-3470-8 ↗
9. Support structures for additive manufacturing: a review
10. Photopyroelectric measurement of thermal conductivity of metallic powders10.1063/1.1832740 ↗
11. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts10.1108/13552540710776142 ↗
12. D. Thomas, R. Bibb, Identifying the geometric constraints and process specific challenges of selective laser melting, Proceedings of the Time Compression Technologies Rapid Manufacturing Conference, Coventry, UK, 2008.
13. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
14. M.J. Ansari, D.-S. Nguyen, H.S.J.M. Park, Investigation of SLM Process in Terms of Temperature Distribution and Melting Pool Size: Modeling and Experimental Approaches, 12(8) (2019) 1272.10.3390/ma12081272 ↗
15. Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting10.1016/j.actamat.2017.05.061 ↗
16. Optimizing supports for additive manufacturing10.1007/s00158-018-2125-x ↗
17. Topology optimization of lattice support structures for heat conduction in selective laser melting10.1007/s00170-020-05741-9 ↗
18. C. Wang, X. Qian, Optimizing Support for Heat Dissipation in Additive Manufacturing, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, 2020, p. V009T09A018.10.1115/DETC2020-22198 ↗
19. Topology optimization of thermal conductive support structures for laser additive manufacturing10.1016/j.cma.2019.03.054 ↗
20. Coupling lattice structure topology optimization with design-dependent feature evolution for additive manufactured heat conduction design10.1016/j.cma.2017.12.024 ↗
21. Concurrent lattice infill with feature evolution optimization for additive manufactured heat conduction design10.1007/s00158-018-1905-7 ↗
22. On utilizing topology optimization to design support structure to prevent residual stress induced build failure in laser powder bed metal additive manufacturing
23. Sensitivity analysis and lattice density optimization for sequential inherent strain method used in additive manufacturing process10.1016/j.cma.2020.113231 ↗
24. Limitations of the inherent strain method in simulating powder bed fusion processes
25. An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering
26. New method for fast predictions of residual stress and distortion of AM parts
27. Topology optimization of support structure layout in metal-based additive manufacturing accounting for thermal deformations10.1007/s00158-020-02512-8 ↗
28. Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing10.1007/s10999-020-09494-x ↗
29. Efficient predictive model of part distortion and residual stress in selective laser melting
30. Experimental validation of thermo-mechanical part-scale modeling for laser powder bed fusion processes
31. Heat transfer model and finite element formulation for simulation of selective laser melting10.1007/s00466-017-1496-y ↗
32. Thermodynamically-consistent phase-field models for solidification10.1016/0167-2789(93)90189-8 ↗
33. A novel heat source model for analysis of melt pool evolution in selective laser melting process
34. Prediction of melt pool dimension and residual stress evolution with thermodynamically-consistent phase field and consolidation models during re-melting process of SLM10.32604/cmc.2020.012688 ↗
35. Temperature thread multiscale finite element simulation of selective laser melting for the evaluation of process
36. Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting10.1115/1.3109245 ↗
37. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting10.1016/j.matdes.2013.05.070 ↗
38. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting10.1007/s11665-013-0658-0 ↗
39. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
40. Thermophysical properties of solid and liquid Ti-6Al-4V (TA6V) alloy10.1007/PL00021868 ↗
41. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
42. A.C. To, Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints10.1016/j.cma.2018.10.010 ↗
43. A review of homogenization and topology optimization I—homogenization theory for media with periodic structure10.1016/S0045-7949(98)00131-X ↗
44. Multi-scale topology optimization of multi-material structures with controllable geometric complexity—applications to heat transfer problems10.1016/j.cma.2019.07.021 ↗
45. A brief introduction to homogenization and miscellaneous applications, ESAIM: proceedings
46. Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation10.1108/RPJ-04-2016-0069 ↗
47. A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials10.1016/j.compstruct.2005.11.034 ↗
48. Effective properties of the octet-truss lattice material10.1016/S0022-5096(01)00010-2 ↗
49. Detection of process failures in layerwise laser melting with optical process monitoring10.1016/j.phpro.2012.10.097 ↗
50. Temperature-constrainedtopology optimization of transient heat conduction problems10.1080/10407790.2015.1033306 ↗
51. A global heat compliance measure based topology optimization for the transient heat conduction problem10.1080/10407790.2013.873309 ↗
52. Transient thermal dissipation efficiency based method for topology optimization of transient heat conduction structures10.1016/j.ijheatmasstransfer.2021.121004 ↗
53. Multi-material topology optimization for the transient heat conduction problem using a sequential quadratic programming algorithm10.1080/0305215X.2017.1417401 ↗
54. Least dissipation principle of heat transport potential capacity and its application in heat conduction optimization10.1007/BF03183239 ↗
55. Validation of a structural optimization algorithm transforming dynamic loads into equivalent static loads10.1023/A:1024799727258 ↗
56. Transformation of dynamic loads into equivalent static loads based on modal analysis10.1002/(SICI)1097-0207(19990910)46:1<29::AID-NME661>3.0.CO;2-D ↗
57. Dynamic response topology optimization in the time domain using equivalent static loads10.2514/1.J051256 ↗
58. Structural optimization using equivalent static loads at all time intervals10.1016/S0045-7825(01)00373-5 ↗
59. Optimal shape design as a material distribution problem10.1007/BF01650949 ↗
60. The COC algorithm, Part II: topological, geometrical and generalized shape optimization10.1016/0045-7825(91)90046-9 ↗
61. Generalized shape optimization without homogenization10.1007/BF01742754 ↗
62. The method of moving asymptotes—a new method for structural optimization10.1002/nme.1620240207 ↗
63. Advanced lattice support structures for metal additive manufacturing10.1016/j.jmatprotec.2013.01.020 ↗
64. D. Systèmes, Abaqus 6.10 online documentation, Abaqus User Subroutines Reference Manual (2010).
65. Comparison of residual strains measured by X-ray and neutron diffraction in a titanium (Ti–6Al–4V) matrix composite10.1016/S0921-5093(98)00893-4 ↗
66. Nangle-Smith, Influence of thermal properties on residual stresses in SLM of aerospace alloys10.1108/RPJ-03-2019-0065 ↗
67. Mills · 2002
68. Materials properties handbook: titanium alloys