Consumable development to tailor residual stress in parts fabricated using directed energy deposition processes
Source abstract
Abstract
Abstract Distortion and residual stresses are major challenges that limit the ability to fabricate large scale structures using Additive Manufacturing (AM). Researchers worldwide are evaluating techniques to induce compressive residual stress in the parts via intermittent rolling. While reasonable success has been documented, the idea of lowering the martensite start temperature to induce compressive stresses has not been evaluated in the context of AM, despite demonstrated success by the welding community. This study validates the hypothesis that, by a proper selection of materials and process parameters, one may effectively reduce distortion and induce a compressive residual stress in AM parts. Using neutron diffraction to measure residual stresses in parts, we demonstrate that, in addition to selection of the correct materials, the inter pass temperature plays a major role in controlling the residual stress evolution. The observations relating to the residual stresses are rationalized based on a microstructural evolution in these samples. Based on this preliminary study, a strategy to fabricate large structures with minimal distortion and residual stress is outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. On the toughness scatter in low alloy C-Mn steel samples fabricated using wire arc additive manufacturing10.1016/j.msea.2017.11.101 ↗
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Texture evolution during laser direct metal deposition of Ti-6Al-4V10.1007/s11837-015-1797-6 ↗
4. Design, fabrication, and characterization of graded transition joints
5. Gibson · 2010
6. On the toughness scatter in low alloy C-Mn steel samples fabricated using wire arc additive manufacturing10.1016/j.msea.2017.11.101 ↗
7. Correlation of microstructure and mechanical properties of metal big area additive manufacturing10.3390/app9040787 ↗
8. H.E. Coules, Contemporary approaches to reducing weld induced residual stress Contemporary approaches to reducing weld induced residual stress, vol. 0836, 2013, doi: 10.1179/1743284712Y.0000000106.10.1179/1743284712Y.0000000106 ↗
9. Residual stress. Part 2–Nature and origins10.1179/026708301101510087 ↗
10. Residual stress. Part 1–measurement techniques10.1179/026708301101509980 ↗
11. Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
12. Metal additive-manufacturing process and residual stress modeling10.1186/s40192-016-0047-2 ↗
13. Fast simulation of temperature and phase transitions in directed energy deposition additive manufacturing
14. In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
15. Welding residual stresses in ferritic power plant steels10.1179/174328407X213116 ↗
16. C.L. Tsai, S.C. Park, and W.T. Cheng, Welding Distortion of a Thin-Plate Panel Structure The effect of welding sequence on panel distortion is evaluated, no. May, pp. 156–165, 1999, [Online]. Available: 〈http://files.aws.org/wj/supplement/WJ_1999_05_s156.pdf〉.
17. Investigating the bifurcation phenomenon in plate welding
18. An efficient FE computation for predicting welding induced buckling in production of ship panel structure10.1016/j.marstruc.2014.12.007 ↗
19. Experimental and computational analysis of residual buckling distortion of bead-on-plate welded joint10.1016/j.jmatprotec.2013.02.009 ↗
20. Mitigation of welding induced buckling distortion using transient thermal tensioning10.1179/136217103225008919 ↗
21. F.M. Pattee, Buckling distortion of thin aluminum plates during welding. p. 214, 1975, [Online]. Available: 〈https://dspace.mit.edu/handle/1721.1/27432%0Ahttp://dspace.mit.edu/handle/1721.1/27432〉.
22. W.K.C. Jones, P.J. Alberry, Model for stress accumulation in steels during welding, 1978.
23. Superior fatigue crack growth properties in newly developed weld metal10.1016/S0142-1123(99)00062-6 ↗
24. Fatigue strength improvement of lap welded joints by low transformation temperature welding wire - Superior improvement with strength of steel10.1007/BF03266382 ↗
25. Repair of fatigue cracks initiated around box welds using low transformation temperature welding material10.1533/wint.2004.3221 ↗
26. New developed welding electrode for improving the fatigue strength of welded joints
27. Cruciform filletwelded joint fatigue strength improvements by weld metal phase transformations10.1111/j.1460-2695.2007.01205.x ↗
28. Effect of martensite start and finish temperature on residual stress development in structural steel welds
29. S. Wu, D. Wang, X. Di, Y. Li, X. Meng, Toughening mechanisms of low transformation temperature deposited metals with martensite – austenite dual phases, pp. 3720–3734, 2018.10.1007/s10853-017-1766-2 ↗
30. Review: low transformation temperature weld filler for tensile residual stress reduction10.1016/j.matdes.2013.11.050 ↗
31. Wang · 2016
32. G. Çam, O. Özdemir, M. Koçak, “Progress in Low Transformation Temperature (LTT) Filler Wires: Review,” … 63rd Annu. Assem. …, 2010.
33. Analysis of low transformation temperature welding (LTTW) consumables – distortion control and evolution of stresses10.1179/1362171814Y.0000000199 ↗
34. Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy10.1179/1362171813Y.0000000162 ↗
35. Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds10.1179/1362171811Y.0000000003 ↗
36. Residual stress control of multipass welds using low transformation temperature fillers10.1080/02670836.2017.1410954 ↗
37. A simple model for multipass steel welds10.1016/0956-7151(94)90432-4 ↗
38. The importance of interpass temperature
39. Current capabilities of the residual stress diffractometer at the high flux isotope reactor10.1063/1.5037593 ↗
40. Hutchings · 2005
41. A high performance focusing silicon monochromator10.1080/10238169708200225 ↗
42. Fatigue properties of longitudinal attachments welded using low transformation temperature filler
43. The effects of filler metal transformation temperature on residual stresses in a high strength steel weld10.1115/1.3122036 ↗
44. Mechanical properties of low-transformation-temperature weld metals after low-temperature postweld heat treatment10.1080/13621718.2018.1492776 ↗
45. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
46. Experimental measurement of biaxial thermal stress fields caused by arc welding10.1016/j.jmatprotec.2011.12.006 ↗
47. Residual stresses in LENS® components using neutron diffraction and contour method10.1016/j.msea.2005.02.019 ↗
48. Experimental and numerical study of the LENS rapid fabrication process10.1115/1.3173952 ↗
49. Residual stresses in LENS-deposited AISI 410 stainless steel plates10.1016/j.msea.2008.05.044 ↗
50. Time-resolved X-ray diffraction investigation of primary weld solidification in Fe-C-Al-Mn steel welds10.1016/S1359-6454(02)00317-8 ↗
51. A model for the development of microstructure in low-alloy steel (Fe-Mn-Si-C) weld deposits10.1016/0001-6160(85)90238-X ↗
52. On the ductile-brittle transition in lath martensitic steel10.2355/isijinternational.51.1569 ↗
53. Thermal mechanisms of grain and packet refinement in a lath martensitic steel10.2355/isijinternational.38.1277 ↗
54. Variant selection of martensites in steel welded joints with low transformation temperature weld metals10.1016/j.jallcom.2012.02.022 ↗