3D Printed high functional density packaging compatible out-of-plane antennas
Source abstract
Abstract
Abstract This paper demonstrates a simple, low-cost additive manufacturing technique for fabricating structures compatible with high-density packaging solutions. Leveraging the third dimension (z-axis), several out-of-plane (non-planar) antennas that are compatible with multi-layer integration are presented, including an elevated vertical mount patch antenna, an air-gap based E-Patch antenna, a monopole with a corner reflector, and a vertical Yagi-Uda antenna. A T-line resonator is characterized to understand the transmission line losses associated with the vertical bends. Details of the simulation, fabrication, and measurements are presented. Simulations are carried out using ANSYS High-Frequency Structure Simulator (HFSS®), and structures are fabricated using a polyjet printing process. The measured results are in good agreement with the simulation results, and overall a good performance is achieved for all the antenna designs. For example, the elevated vertical mount patch shows a gain of 3.62 dBi (center frequency of 5.4 GHz), and the air-gap E-patch antenna shows a gain of 6 dBi at 2.4 GHz and 10 dB bandwidth of 4.9 GHz. The vertical monopole antenna with a corner reflector shows a peak gain of 7.3 dBi at 6 GHz, and the Yagi-Uda antenna shows a forward gain of 6 dBi at 5 GHz.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Antenna Design and Analysis · Advanced Antenna and Metasurface Technologies · Microwave Engineering and Waveguides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Gibson · 2009
2. 3D printing multifunctionality: structures with electronics10.1007/s00170-014-5717-7 ↗
3. 3-D printing: the new industrial revolution10.1016/j.bushor.2011.11.003 ↗
4. Affordable 3D printed microwave antennas
5. Rf/microwave high-frequency high-reliability
6. 3-D printed air substrates for the design and fabrication of rf components, IEEE Transactions on Components
7. 3D printed out-of-plane antennas for use on high density boards
8. A Yagi–Uda array of high-efficiency wire-bond antennas for on-chip radio applications10.1109/TMTT.2009.2034051 ↗
9. 60-GHz CPW-fed post-supported patch antenna using micromachining technology10.1109/LMWC.2005.856690 ↗
10. 122 ghz antenna-integration in a plastic package based on a flip chip interconnect
11. Integration of slot antenna in LTCC package for 60 GHz radios10.1049/el:20083352 ↗
12. High performance system-on-package integrated yagi-uda antennas for W-band applications and mm-wave ultra-wideband data links
13. On-chip antenna: practical design and characterization considerations
14. Demonstration of rf and microwave passive circuits through 3D printing and selective metalization10.1109/TCPMT.2017.2651645 ↗
15. A 94-GHz aperture-coupled micromachined microstrip antenna10.1109/8.817650 ↗
16. Micromachined CPW-fed suspended patch antenna for 77 GHz automotive radar applications
17. Performance enhancement of a dual-band monopole antenna by using a frequency selective surface-based corner reflector10.1109/TAP.2016.2552543 ↗