3D Printing of Damage‐tolerant Martian Regolith Simulant‐based Geopolymer Composites
Source abstract
Abstract
Geopolymers (GPs) have emerged as promising building blocks for Martian construction, yet their inherent brittleness and relatively high density hinder practical application and technological implementation. Implanting biomimetic inspiration from long-term evolution into GPs provides an alternative approach to endow the skeleton with fascinating properties such as lightweight, high strength and high toughness. Here, we first develop a basalt fiber-reinforced Martian regolith simulant-based GP ink for direct ink writing that exhibits excellent rheological properties and rapid solid-to-liquid transition, enabling large-scale production of GP composites with customizable biomimetic patterns and controllable fiber alignment. Among these biomimetic structures, the helical pattern shows the highest compressive strength of ~32.2 MPa, enabling the construction of robust engineering components that can withstand high loads. Meanwhile, the 3D-printed suture pattern shows a relatively low compressive strength of ~9.3 MPa, yet excellent fracture ductility with an ultimate strain of ~14% due to the layer-by-layer stress relaxation mode, promising for deformation-resistant materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Planetary Science and Exploration · Additive Manufacturing and 3D Printing Technologies · Spaceflight effects on biology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Glacial and gully erosion on Mars: A terrestrial perspective10.1016/j.geomorph.2018.05.019 ↗
2. Effect of Moon perturbation on the energy curves and equilibrium points in the Sun–Earth–Moon system
3. The Moon Project: Where Management Meets Mathematics
4. Sustainable challenges on the moon, Current Opinion in Green and Sustainable
5. The lunar moho and the internal structure of the Moon: A geophysical perspective10.1016/j.tecto.2013.02.024 ↗
6. Preparation and evaluation of geopolymer based on BH-2 lunar regolith simulant under lunar surface temperature and vacuum condition10.1016/j.actaastro.2021.08.039 ↗
7. Spectral properties of simulated impact glasses produced from martian soil analogue JSC Mars-110.1016/j.icarus.2009.02.007 ↗
8. Comparison of lunar and Martian regolith simulant-based geopolymer cements formed by alkali-activation for in-situ resource utilization10.1016/j.asr.2021.10.045 ↗
9. A review on applications of sol-gel science in cement10.1016/j.conbuildmat.2021.123065 ↗
10. Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure
11. Thermoelectric energy harvesting using cement-based composites: a review, Materials Today10.1002/9781119741503 ↗
12. Development of martian regolith and bedrock simulants: Potential and limitations of martian regolith as an in-situ resource10.1016/j.icarus.2020.114055 ↗
13. Geopolymer foams: An overview of recent advancements10.1016/j.pmatsci.2019.100621 ↗
14. Chakraborty · Geopolymerization Simula Martian Soil · 2019
15. Geopolymers from lunar and Martian soil simulants10.1016/j.asr.2016.10.003 ↗
16. Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites10.1016/j.jeurceramsoc.2016.03.026 ↗
17. Mechanical Properties of Basalt Fiber Reinforced Fly Ash-Based Geopolymer Composites10.18502/keg.v5i4.6800 ↗
18. Review on Basalt Fiber
19. Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack10.1016/j.conbuildmat.2016.12.103 ↗
20. Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer10.1016/j.conbuildmat.2020.118976 ↗
21. Performance evaluation of basalt fiber-reinforced geopolymer composites with various contents of nano CaCO310.1016/j.ceramint.2021.07.169 ↗
22. Structural Design Elements in Biological Materials: Application to Bioinspiration10.1002/adma.201502403 ↗
23. Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs10.1002/adma.201901561 ↗
24. Materials science. Bioinspired structural materials10.1126/science.1154295 ↗
25. Biomimicry for 3D concrete printing: A review and perspective
26. 3D-printing of architectured short carbon fiber-geopolymer composite10.1016/j.compositesb.2021.109348 ↗
27. Biological and bioinspired materials: Structure leading to functional and mechanical performance
28. 3D printed architected polymeric sandwich panels: Energy absorption and structural performance10.1016/j.compstruct.2018.04.002 ↗
29. 3D printing geopolymers: A review10.1016/j.cemconcomp.2022.104455 ↗
30. Direct ink writing of geopolymeric inks10.1016/j.jeurceramsoc.2017.01.030 ↗
31. Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing10.1016/j.compositesb.2019.107290 ↗
32. Shaping of geopolymer composites by 3D printing
33. 3D printed mesh reinforced geopolymer: Notched prism bending10.1016/j.cemconcomp.2020.103892 ↗
34. Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing10.1016/j.cemconcomp.2021.104088 ↗
35. Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing10.1016/j.conbuildmat.2020.120786 ↗
36. Role of temperature in 3D printed geopolymers: Evaluating rheology and buildability10.1016/j.matlet.2021.129680 ↗
37. Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications10.1016/j.cemconcomp.2021.104060 ↗
38. Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties
39. The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies10.3390/ijms23042023 ↗
40. Additive Manufacturing of Ceramics from Liquid Feedstocks
41. X-ray diffraction results from Mars Science Laboratory: mineralogy of Rocknest at Gale crater10.1126/science.1238932 ↗
42. Xu, The geopolymerisation of alumino-silicate minerals
43. Kinetics of fly ash geopolymerization10.1007/s10853-010-5186-9 ↗
44. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
45. C.C.A.K.M.J.R.V.M.D.J. Lindstrom, JSC MARS-1: A Martian Soil Simulant Sixth ASCE Specialty Conference and Exposition on Engineering, Construction, and Operations in Space (1998).
46. JMSS-1: a new Martian soil simulant10.1186/s40623-015-0248-5 ↗
47. Stiffness and strength of suture joints in nature
48. The hierarchical structure and mechanics of plant materials10.1098/rsif.2012.0341 ↗
49. 3D-printing of lightweight cellular composites10.1002/adma.201401804 ↗
50. 3D printing geopolymer nanocomposites: Graphene oxide size effects on a reactive matrix10.1016/j.carbon.2020.02.021 ↗
51. A multi-scale description of orientation in simple shear flows of confined rod suspensions10.1016/j.jnnfm.2016.01.011 ↗
52. Fiber motion in highly confined flows of carbon fiber and non-Newtonian polymer10.1016/j.jnnfm.2019.01.003 ↗
53. Stiffness and strength of suture joints in nature10.1103/PhysRevE.84.062904 ↗
54. 3D printed recoverable honeycomb composites reinforced by continuous carbon fibers10.1016/j.compstruct.2021.113974 ↗
55. Synthesis and additive manufacturing of calcium silicate hydrate scaffolds10.1016/j.jmrt.2021.01.090 ↗
56. Enhancing carbonation and strength of MgO cement through 3D printing10.1016/j.conbuildmat.2022.126867 ↗
57. Effect of FA and GGBFS on compressive strength, rheology, and printing properties of cement-based 3D printing material10.1016/j.conbuildmat.2022.127685 ↗
58. Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing10.1016/j.cemconcomp.2018.10.002 ↗
59. Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete10.1016/j.cemconcomp.2020.103899 ↗
60. Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing10.1016/j.jclepro.2019.02.185 ↗
61. Additive manufacturing of SiOC scaffolds with tunable structure-performance relationship10.1016/j.jeurceramsoc.2021.08.043 ↗