journal article·2021-03Open access

There’s plenty of room at the top

L. Love, B. Post, M. Noakes, A. Nycz, V. Kunc

Abstract

Abstract Richard Feynman’s famous words, “there’s plenty of room at the bottom,” referred to the opportunities for revolutionizing the electronics industry by developing the science and technology of how to manufacture very small components (sub-micron to nanometer sized features) (Feynman, 1959) [ 1 ]. In additive manufacturing (AM), the opposite may be true: There’s plenty of room at the top. AM’s strength is in the low volume production of complex components, which is demanded in big industries such as oil and gas, construction, tooling, wind and water turbines, and infrastructure. Is AM’s ‘big’ future in the manufacture of large structures? This special issue surveys the technical challenges and enormous opportunities associated with large scale additive manufacturing while discussing the materials, processes and applications that are enabled by scaling to much larger structures, much faster speeds and lower manufacturing costs. The authors believe that, if Professor Feynman was alive, he’d say “There’s plenty of room at the top.”
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. R. Feynman, Plenty of Room at the Bottom. American Physical Society Meeting, 1959.
2. On stereolithography10.1080/17452759.2012.723409 ↗
3. Wohlers Associates, Wohlers Report: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report, 2015. Retrieved from 〈https://wohlersassociates.com/2015-ExSum.pdf〉.
4. Crump · 1991 · 53
5. Perspectives on additive manufacturing10.1146/annurev-matsci-070115-031606 ↗
6. Economics of additive manufacturing for end-usable metal parts10.1007/s00170-011-3878-1 ↗
7. J. Ruan, T. Sparks, C. Fan, J. Stroble, A. Panackal, F. Liou, A Review of Layer Based Manufacturing Processes for Metals. Solid Freeform Fabrication Symposium, 2006, pp. 233–245. Austin.
8. Integrating digital image correlation in mechanical testing for the materials characterization of big area additive manufacturing feedstock
9. Designing for big area additive manufacturing
10. Introduction to the design rules for metal big area additive manufacturing
11. Extrusion control for high quality printing on Big Area Additive Manufacturing (BAAM) systems
12. Large-format plymeric pellet-based additive manufacturing for the naval industry
13. Multi-scale design and fabrication of the trabeculae pavilion
14. Laser strip cladding for large area metal deposition
15. Skeleton arc additive manufacturing with closed loop control
16. Planar deposition flow modeling of fiber filled composites in large area additive manufacturing
17. Green fab lab applications of large-area waste polymer-based additive manufacturing
18. 3D printing for construction based on a complex wall of polymer-foam and concrete
19. Print Time vs. elapsed time: a temporal analysis of a continuous printing operation for additive constructed concrete
20. Development of the construction processes for reinforced additively constructed concrete
21. Fabrication and durability testing of a 3D printed façade for desert climates
22. B. Canis, The tool and die industry: Contribution to US manufacturing and federal policy considerations. CRS Report for congress, 2012.