journal article·2022-08

On-the-fly 3D metrology of volumetric additive manufacturing

Antony Orth, Kathleen L. Sampson, Yujie Zhang, Kayley Ting, Derek Aranguren van Egmond, Kurtis Laqua, Thomas Lacelle, Daniel Webber, Dorothy Fatehi, Jonathan Boisvert, Chantal Paquet

Publisher page

Abstract

Additive manufacturing techniques are revolutionizing product development by enabling fast turnaround from design to fabrication. However, the throughput of the rapid prototyping pipeline remains constrained by print optimization, requiring multiple iterations of fabrication and ex-situ metrology. Despite the need for a suitable technology, robust in-situ shape measurement of an entire print is not currently available with any additive manufacturing modality. Here, we address this shortcoming by demonstrating fully simultaneous 3D metrology and printing. We exploit the dramatic increase in light scattering by a photoresin during gelation for real-time 3D imaging of prints during tomographic volumetric additive manufacturing. Tomographic imaging of the light scattering density in the build volume yields quantitative, artifact-free 3D + time models of cured objects that are accurate to below 1% of the size of the print. By integrating shape measurement into the printing process, our work paves the way for next-generation rapid prototyping with real-time defect detection and correction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Anatomy and Medical Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Volumetric additive manufacturing via tomographic reconstruction10.1126/science.aau7114 ↗
2. One-step volumetric additive manufacturing of complex polymer structures10.1126/sciadv.aao5496 ↗
3. High-resolution tomographic volumetric additive manufacturing10.1038/s41467-020-14630-4 ↗
4. Correcting ray distortion in tomographic additive manufacturing10.1364/OE.419795 ↗
5. High fidelity volumetric additive manufacturing
6. Tomographic color Schlieren refractive index mapping for computed axial lithography
7. J. Madrid-Wolff, A. Boniface, D. Loterie, P. Delrot, C. Moser, Light-based Volumetric Additive Manufacturing in Scattering Resins, ArXiv:2105.14952 [Physics]. (2021). 〈http://arxiv.org/abs/2105.14952〉 (accessed September 17, 2021).10.1109/CLEO/Europe-EQEC52157.2021.9541688 ↗
8. Highly tunable thiol-ene photoresins for volumetric additive manufacturing10.1002/adma.202003376 ↗
9. Volumetric bioprinting of complex living-tissue constructs within seconds10.1002/adma.201904209 ↗
10. M. Kollep, G. Konstantinou, J. Madrid-Wolff, A. Boniface, P.V.W. Sasikumar, G. Blugan, P. Delrot, D. Loterie, C. Moser, Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics, ArXiv:2109.12680 [Physics]. (2021). 〈http://arxiv.org/abs/2109.12680〉 (accessed October 25, 2021).
11. J. Toombs, M. Luitz, C. Cook, S. Jenne, C.C. Li, B. Rapp, F. Kotz-Helmer, H. Taylor, Volumetric Additive Manufacturing of Silica Glass with Microscale Computed Axial Lithography, ArXiv:2110.01651 [Physics]. (2021). 〈http://arxiv.org/abs/2110.01651〉 (accessed October 25, 2021).
12. A comprehensive review: metrology in additive manufacturing and 3D printing technology10.1007/s40964-020-00142-6 ↗
13. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing10.1016/j.matdes.2016.01.099 ↗
14. Additive manufacturing metrology: state of the art and needs assessment10.1063/1.4940604 ↗
15. X-ray microcomputed tomography in additive manufacturing: a review of the current technology and applications10.1089/3dp.2018.0060 ↗
16. Online geometry monitoring during directed energy deposition additive manufacturing using laser line scanning
17. Vision-based real-time monitoring of extrusion additive manufacturing processes for automatic manufacturing error detection10.1007/s00170-021-07419-2 ↗
18. Dijkshoorn · 2020 · 1
19. In-situ droplet monitoring of inkjet 3D printing process using image analysis and machine learning models10.1016/j.promfg.2021.06.045 ↗
20. Factors effecting real-time optical monitoring of fused filament 3D printing10.1007/s40964-017-0027-x ↗
21. Online quality monitoring in material extrusion additive manufacturing processes based on laser scanning technology10.1016/j.precisioneng.2019.06.004 ↗
22. An application of 3D model reconstruction and augmented reality for real-time monitoring of additive manufacturing10.1016/j.procir.2019.03.060 ↗
23. Time-resolved light scattering study on the gelation process of poly(N-isopropyl acrylamide)10.1016/S0032-3861(97)00596-X ↗
24. Time-resolved dynamic light scattering studies on gelation process of organic−inorganic polymer hybrids10.1021/ma981306h ↗
25. Optical projection tomography as a tool for 3D microscopy and gene expression studies10.1126/science.1068206 ↗
26. Correction of artefacts in optical projection tomography10.1088/0031-9155/50/19/015 ↗
27. Point spread function based image reconstruction in optical projection tomography10.1088/1361-6560/aa8945 ↗
28. Continuous liquid interface production of 3D objects10.1126/science.aaa2397 ↗
29. Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning10.1126/sciadv.aau8723 ↗
30. Xolography for linear volumetric 3D printing10.1038/s41586-020-3029-7 ↗
31. Two-photon direct laser writing of ultracompact multi-lens objectives10.1038/nphoton.2016.121 ↗
32. Object-space optimization of tomographic reconstructions for additive manufacturing
33. The Stanford 3D Scanning Repository, (n.d.). 〈http://graphics.stanford.edu/data/3Dscanrep/〉 (accessed December 16, 2020).
34. High-resolution limited-angle phase tomography of dense layered objects using deep neural networks10.1073/pnas.1821378116 ↗
35. Optimal short scan convolution reconstruction for fan beam CT10.1118/1.595078 ↗
36. P. Cignoni, M. Callieri, M. Corsini, M. Dellepiane, F. Ganovelli, G. Ranzuglia, MeshLab: an Open-Source Mesh Processing Tool, Eurographics Italian Chapter Conference. (2008) 8 pages. 〈https://doi.org/10.2312/LOCALCHAPTEREVENTS/ITALCHAP/ITALIANCHAPCONF2008/129–136〉.
37. Thingiverse.com, Skye (Paw Patrol) by Gunnar86, (n.d.). 〈https://www.thingiverse.com/thing:2070914〉 (accessed October 25, 2021).
38. Scattering, Rayleigh
39. Volumetric Bioprinting of Organoids and Optically Tuned Hydrogels to Build Liver-Like Metabolic Biofactories
40. Bio-inspired self-healing structural color hydrogel10.1073/pnas.1703616114 ↗
41. Static light scattering monitoring and kinetic modeling of polyacrylamide hydrogel synthesis10.3390/pr7040237 ↗
42. Zwitterionic poly(betaine-n-isopropylacrylamide) microgels: properties and applications10.1021/cm801585x ↗
43. Direct printing of functional 3D objects using polymerization-induced phase separation10.1038/s41467-020-20256-3 ↗
44. M. Dawson-Haggerty, Trimesh, (2020). 〈https://github.com/mikedh/trimesh〉 (accessed December 15, 2020).