A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting
Source abstract
Abstract
3D sand mould printing using binder jet technology can enable many technical improvements in casting practice, including part consolidation, design of parts to optimise the consumption of materials and hazardous chemicals, and on-demand and flexible size part manufacturing near the customer. Incorporating artificial intelligence in optimising the design of moulds, printing process parameters, and solidification processes may help automate a production facility and reduce labour time. Elimination of hazardous chemicals from industrial use may be a challenge. Therefore, an alternative technology to fuse the sand particles during printing or an environmentally friendlier alternative option for the binders and other consumables should be utilised with the 3D sand printing process. Properties of parts produced using 3D printed sand moulds have the potential to be better than the properties of parts produced using traditional casting due to this technology's benefits. This technology is an enabling technology for traditional casting processes rather than a competing technology. It is causing a paradigm shift in casting design because of the mould geometries achievable by using additive manufacturing to produce the sand mould. This paper reviews the first twenty years of research and challenges in developing 3D sand printing processes as an innovation for sustainable manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Laser sintering of silica sand – mechanism and application to sand casting mould10.1007/s00170-002-1424-x ↗
2. A review on additive manufacturing of sand molds by binder jetting and selective laser sintering10.1108/RPJ-10-2016-0161 ↗
3. Materials for additive manufacturing10.1016/j.cirp.2017.05.009 ↗
4. WITHDRAWN: Binder jet 3D printing – process parameters, materials, properties, and challenges10.1016/j.pmatsci.2020.100684 ↗
5. D. Günther, F. Mögele, Additive manufacturing of casting tools using powder-binder-jetting technology, in: New Trends in 3D Printing, 2016.10.5772/62532 ↗
6. Effect of process parameters on flexure strength and gas permeability of 3D printed sand molds10.1016/j.jmapro.2020.02.043 ↗
7. Characterisation of 3D printed sand moulds using micro-focus X-ray computed tomography10.1108/RPJ-04-2018-0091 ↗
8. Investigation of process parameter effect on anisotropic properties of 3D printed sand molds
9. Gibson · 2015 · 205
10. Reduced consumption of materials and hazardous chemicals for energy efficient production of metal parts through 3D printing of sand molds10.1016/j.jclepro.2019.03.158 ↗
11. Effectiveness analysis of resources consumption, environmental impact and production efficiency in traditional manufacturing using new technologies: case from sand casting10.1016/j.enconman.2020.112671 ↗
12. Case studies on integrating 3D sand-printing technology into the production portfolio of a sand-casting foundry
13. Mechanical characterisation of anisotropic silica sand/furan resin compound induced by binder jet 3D additive manufacturing technology10.1016/j.ceramint.2020.04.093 ↗
14. S. Mitra, M. El Mansori, M. Costin, A. Rodríguez de Castro, On quality assessment of 3D printed sand mold using non-destructive X-ray µ-CT.
15. The effect of ageing process on three-point bending strength and permeability of 3D printed sand molds10.1007/s00170-018-2024-8 ↗
16. On the rapid manufacturing process of functional 3D printed sand molds10.1016/j.jmapro.2019.04.034 ↗
17. S. Mitra, M. El Mansori, M. Costin, A.R.D. Castro, On quality assessment of 3D printed sand mold using non-destructive X-ray µ-CT, in: International Symposium on Digital Industrial Radiology and Computed Tomography – DIR2019, 2019.
18. 3D printing for rapid sand casting—a review10.1016/j.jmapro.2017.07.017 ↗
19. Research on the method for improving mechanical properties of sand mold based on 3D printing process
20. 3D-printed shell-truss sand mold for aluminum castings10.1016/j.jmatprotec.2017.05.010 ↗
21. The design of 3D-printed lattice-reinforced thickness-varying shell molds for castings10.3390/ma11040535 ↗
22. Controlled cooling of an aluminum alloy casting based on 3D printed rib reinforced shell mold10.1007/s41230-018-7252-x ↗
23. Effects of hollow structures in sand mold manufactured using 3D printing technology10.1016/j.jmatprotec.2017.12.031 ↗
24. Additive manufacturing-driven mold design for castings
25. Acoustical and optical determination of mechanical properties of inorganically-bound foundry core materials10.3390/ma13112531 ↗
26. Manufacturing processes for light alloys
27. Casting of light alloys
28. Quantifying the role of part design complexity in using 3D sand printing for molds and cores
29. Toward wave-based sound synthesis for computer animation
30. M. Aghaei Meibodi, R. Giesecke, B. Dillenburger, 3D printing sand molds for casting bespoke metal connections-digital metal: additive manufacturing for cast metal joints in architecture, intelligent & informed, in: Proceedings of the 24th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Hong Kong, 2019, pp. 133–142.10.52842/conf.caadria.2019.1.133 ↗
31. D. Snelling, H. Blount, C. Forman, K. Ramsburg, A. Wentzel, C. Williams, A. Druschitz, The effects of 3D printed molds on metal castings, in: Proceedings of the Solid Freeform Fabrication Symposium, 2013, pp. 827–845.
32. Obtaining desired surface roughness of castings produced using ZCast direct metal casting process through Taguchi's experimental approach10.1108/13552541211272009 ↗
33. Mathematical modeling of surface roughness of castings produced using ZCast direct metal casting10.1007/s40032-014-0139-8 ↗
34. Obtaining casts of aluminum alloys by foundry in loose molds fabricated on installations of three-dimensional printing10.3103/S1067821211010081 ↗
35. Characterisation of direct 3D sand printing process for the production of sand cast mould tools10.1108/RPJ-08-2014-0101 ↗
36. A comparative study of fabrication of sand casting mold using additive manufacturing and conventional process10.1007/s00170-018-2020-z ↗
37. Effects of layer thickness and binder saturation level parameters on 3D printing process
38. D. Snelling, C. Williams, A. Druschitz, A comparison of binder burnout and mechanical characteristics of printed and chemically bonded sand molds, in: SFF Symposium, 2014, pp. 197–209.
39. Heat absorption capacity and binder degradation characteristics of 3D printed cores investigated by inverse Fourier thermal analysis
40. Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys
41. Modeling and analysis for hardness and structure of nonferrous alloy castings produced using Zcast metal casting process through response surface methodology10.4028/www.scientific.net/AMR.1137.101 ↗
42. N. McKenna, S. Singamneni, O. Diegel, D. Singh, T. Neitzert, J. St George, A. Roy Choudhury, P. Yarlagadda, Direct metal casting through 3D printing: a critical analysis of the mould characteristics, in: Global Congress on Manufacturing and Management, 2008.
43. Direct metal rapid casting: mechanical optimization and tolerance calculation10.1108/13552540910979758 ↗
44. D. Snelling, R. Kay, A. Druschitz, C. Williams, Mitigating gas defects in castings produced from 3D printed molds, in: 117th Metalcasting Congress, 2012.
45. Research on key technique of line forming for 3D sand mould printing based on quantitative analysis of binder content10.1108/RPJ-08-2017-0168 ↗
46. Investigation on moist silica sand’s circulation for sand mold printing with line-forming
47. 3D sand mould printing: a review and a new approach10.1108/RPJ-05-2016-0088 ↗
48. Experimental investigation on the performance and mesostructure of multi-material composite 3D-printed sand mold10.1108/RPJ-10-2018-0265 ↗
49. Digital high-efficiency print forming method and device for multi-material casting molds10.1007/s11465-019-0574-6 ↗
50. A comparative study of simulation software for modelling metal casting processes10.2507/IJSIMM17(2)402 ↗
51. Optimisation of the filling process in counter-gravity casting10.1088/1757-899X/861/1/012031 ↗
52. Novel sprue designs in metal casting via 3D sand-printing
53. A study on the development of the laser-assisted milling process and a related constitutive equation for silicon nitride10.1016/j.cirp.2014.03.087 ↗
54. Lightweight metal cellular structures fabricated via 3D printing of sand cast molds10.1002/adem.201400524 ↗
55. Non-conventional mold design for metal casting using 3D sand-printing10.1016/j.jmapro.2018.03.049 ↗
56. The role and impact of 3D printing technologies in casting10.1007/s41230-017-6109-z ↗
57. ExOne, 3D Printed Sacrificial Tooling —Washes Out with Water, 2020. 〈https://www.exone.com/en-US/parts-and-service/washout-tooling〉. (Accessed 25 May 2020).
58. V.G.T.O.-P.T. Production-Skovde, Volvo- A foundry with a vision, 2014.
59. Development of a substitute for Z cast molding sand used on installations of 3D printing for obtaining aluminum, magnesium, and iron casting10.3103/S1067821212010129 ↗
60. 3D printing of inorganic sand moulds for casting applications10.4028/www.scientific.net/AMR.1018.441 ↗
61. Bridging additive manufacturing and sand casting: utilizing foundry sand
62. Environmental analysis of waste foundry sand via life cycle assessment10.1007/s11356-016-8085-z ↗
63. Challenges and opportunities to integrate the oldest and newest manufacturing processes: metal casting and additive manufacturing10.1108/RPJ-10-2019-0277 ↗
64. Research on the influence of furan resin addition on the performance and accuracy of 3D printing sand mold
65. Comparative study of 3D printing technologies for rapid casting of aluminium alloy10.1080/10426910902997571 ↗
66. Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys10.1007/s00170-010-2716-1 ↗
67. Rapid casting: a critical analysis of mould and casting characteristics10.1080/14484846.2009.11464576 ↗
68. 3D printed sandstone strength: curing of furfuryl alcohol resin-based sandstones10.1089/3dp.2017.0032 ↗
69. 3D printing for rapid sand casting—a review10.1016/j.jmapro.2017.07.017 ↗
70. 3D printed smart molds for sand casting
71. Mechanical analysis of ceramic/polymer composite with mesh-type lightweight design using binder-Jet 3D printing10.3390/ma11101941 ↗
72. 3D-printed rib-enforced shell sand mold for aluminum castings10.1007/s00170-018-1783-6 ↗
73. Effectiveness analysis of resources consumption, environmental impact and production efficiency in traditional manufacturing using new technologies: case from sand casting10.1016/j.enconman.2020.112671 ↗
74. Study of the evolution of transport properties induced by additive processing sand mold using X-ray computed tomography10.1016/j.jmatprotec.2019.116495 ↗
75. Research on the effect of the waveform on the droplet injection behavior of a piezoelectric printhead and the forming accuracy of casting sand molds
76. Y.Y.颜. Yang Weidong (杨伟东)**, Zhang Renji (张人佶)†, Liu Libing (刘丽冰), Effective Factors on Forming Precision in Patternless Casting Manufacturing Technique, Tsinghua Science and Technology 14 (Number S1, June 2009).10.1016/S1007-0214(09)70089-6 ↗
77. Coating process of multi-material composite sand mold 3D printing10.1007/s41230-017-7078-y ↗
78. S. Chastain, Metal Casting: A Sand Casting Manual for the Small Foundry, Steve Chastain, 2004.
79. ExOne, Sand Casting 3D Printing Materials & Binders, 2020. 〈http://www.exone.com/Resources/Materials〉.
80. Granta, A selection of publications referencing CES Selector, 2020. 〈http://www.grantadesign.com/userarea/papers/〉.
81. Toxicity and carcinogenicity of furan in human diet10.1007/s00204-010-0531-y ↗
82. HoosiernPatternInc., Calculating the Cost of 3D Sand Printing, 2018. 〈https://hoosierpattern.com/news/cost-analysis-breakdown-of-3d-sand-printing〉. (Accessed 04 June 2020).
83. EnvisionTEC, The Robotic Additive Manufacturing systems from EnvisionTEC and Viridis3D are the fastest, most flexible robotic 3D printing options in the foundry and 3D printing industries today, 2020. 〈https://envisiontec.com/3d-printers/robotic-additive-manufacturing/〉. (Accessed 15 June 2020).
84. e. G.H. Bruntland, Report of the World Commission on Environment and Development, Our Common Future, General United Nations Assembly Resolution, 42/187, 1987.
85. Strategies for value creation through sustainable manufacturing10.1016/j.promfg.2017.02.002 ↗
86. Sustainability assessment for manufacturing operations10.3390/en13112730 ↗
87. E. Pagone, K. Salonitis, M. Jolly, Energy and material efficiency metrics in foundries, in: 5th Global Conference on Sustainable Manufacturing, Manufacturing Engineering Society International Conference 2017, MESIC, 2018.10.1016/j.promfg.2018.02.140 ↗
88. Pagone · 2019 · 77
89. U.S.D.o. Environment, Energy and Environmental Profile of the U. S. Aluminum Industry, Office (July), 1997.
90. Classification of industrial energy management practices10.1016/j.egypro.2015.07.311 ↗
91. Energy diagnosis and structuring an energy saving proposal for the metal casting industry: an experience in Colombia10.1016/j.applthermaleng.2018.04.012 ↗
92. I.E. Association, CO2 Emissions from Fuel Combustion 2018—Highlights; International Energy Association, Paris, France, 2018. 〈https://webstore.iea.org/co2-emissions-from-fuel-combustion-2018-highlights〉. (Accessed 30 April 2020).
93. Energy gap method (EGM) to increase energy efficiency in industrial processes: successful cases in polymer processing10.1016/j.jclepro.2017.12.009 ↗
94. Improvements in energy consumption and environmental impact by novel single shot melting process for casting10.1016/j.jclepro.2016.06.165 ↗
95. The challenges for energy efficient casting processes10.1016/j.procir.2016.01.043 ↗
96. Emission of organic compounds from mould and core binders used for casting iron, aluminium and bronze in sand moulds10.1080/10934529.2010.520595 ↗
97. B.C.S. Incorporated, Energy and Environmental Profile of the U.S. Mining Industry, (December), 2002, 11–11.
98. Thermal decomposition of foundry resins: a determination of organic products by thermogravimetry–gas chromatography–mass spectrometry (TG–GC–MS)10.1016/j.arabjc.2016.11.003 ↗
99. Thermal utilization of the post reclamation dust from molding sand with furan resin in test unit
100. S. Dalquist, T. Gutowski, Life cycle analysis of conventional manufacturing techniques: sand casting, in: ASME 2004 International Mechanical Engineering Congress and Exposition, 2004, pp. 631–641.10.1115/IMECE2004-62599 ↗