journal article·2020-03

Simulation study of the spatter removal process and optimization design of gas flow system in laser powder bed fusion

Xiaobing Zhang, Bo Cheng, Charles Tuffile

Publisher page

Abstract

Abstract An urgent need in the laser powder bed fusion (LPBF) process is to efficiently remove emissions from or around the moving melt pool since the powder bed contamination by spatter can potentially damage fabricated part quality. The objective of this study is to propose new designs of the gas flow system in the build chamber to enhance the removability of spatter. Specifically, a Computational Fluid Dynamics (CFD) model for the LPBF gas flow system has been developed to simulate the complicated flow behavior inside the build chamber. The movement of spatter has been calculated by the Discrete Phase Model (DPM). The fully coupled CFD-DPM fluid-particle interaction method has been applied to capture the influence of gas flow on solid particles accurately. Additionally, an analytical expression is utilized to obtain the threshold velocity of inert gas flow upon the powder bed. The spatter distribution in a generic gas chamber design was studied. It was found that the Coanda effect, a gas flow downward tendency toward the substrate, can have a significant impact on the spatter removal process. With the proposed new designs, the Coanda effect is minimized, and most of the spatters can be removed from the build region without blowing up powder bed particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · Aeolian processes and effects · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing10.1038/s41598-017-04237-z ↗
2. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder10.1016/j.matdes.2015.08.086 ↗
3. Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
4. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
5. Numerical analysis of molten pool behavior and spatter formation with evaporation during selective laser melting of 316L stainless steel
6. Two-fluid model to simulate metal powder bed fusion additive manufacturing10.1299/jfst.2018jfst0010 ↗
7. A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V10.1007/s11661-015-2882-8 ↗
8. Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process10.1016/j.jmatprotec.2017.08.012 ↗
9. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties10.1016/j.matdes.2016.12.060 ↗
10. Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction10.1038/s41598-017-03761-2 ↗
11. Spatter formation in selective laser melting process using multi-laser technology10.1016/j.matdes.2017.06.040 ↗
12. A study on the effect of energy input on spatter particles creation during selective laser melting process
13. On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing10.1016/j.jmapro.2018.11.012 ↗
14. In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry10.1016/j.matdes.2018.05.050 ↗
15. Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts10.1016/j.msea.2019.04.026 ↗
16. Spatter and oxide formation in laser powder bed fusion of Inconel 718
17. Study of the spatter distribution on the powder bed during selective laser melting
18. Gas flow effects on selective laser melting (SLM) manufacturing performance10.1016/j.jmatprotec.2011.09.020 ↗
19. Flow analysis of the laminated manufacturing system with laser sintering of metal powder. Part I: flow uniformity inside the working chamber10.1007/s00170-017-0213-5 ↗
20. Optimization of inert gas flow inside laser powder-bed fusion chamber with computational fluid dynamics
21. A study into the effects of gas flow inlet design of the Renishaw AM250 laser powder bed fusion machine using computational modelling
22. Philo · 2018 · 65
23. Spatter transport by inert gas flow in selective laser melting: a simulation study10.1016/j.powtec.2019.04.044 ↗
24. Fluent · 2013
25. The physics of wind-blown sand and dust10.1088/0034-4885/75/10/106901 ↗
26. A comprehensive numerical model of steady state saltation (COMSALT)10.1029/2009JD011702 ↗
27. Eulerian–Lagrangian simulation of aeolian sand transport10.1016/j.powtec.2005.12.002 ↗
28. Numerical investigation of particle velocity distributions in aeolian sand transport10.1016/j.geomorph.2009.10.001 ↗
29. Numerical simulation of saltating particles in atmospheric boundary layer over flat bed and sand ripples10.1029/2011JD017424 ↗
30. Wind-blown particulate transport: A review of computational fluid dynamics models10.3934/mine.2019.3.508 ↗
31. A simple expression for wind erosion threshold friction velocity10.1029/2000JD900304 ↗
32. Çengel · 2010
33. Is there a universal log law for turbulent wall-bounded flows? Philosophical Transactions of the Royal Society A: Mathematical
34. Laser powder bed fusion at sub-atmospheric pressures10.1016/j.ijmachtools.2018.03.007 ↗
35. Denudation of metal powder layers in laser powder bed fusion processes10.1016/j.actamat.2016.05.017 ↗
36. Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing10.1038/s41598-019-41415-7 ↗
37. Ahmed · 2019
38. Low cost, High speed stereovision for spatter tracking in laser powder bed fusion
39. High-power laser-matter interaction during laser powder bed fusion
40. A Numerical Investigation of Thermal Property Effects on Melt Pool Characteristics in Powder-bed Electron Beam Additive Manufacturing10.1177/0954405416673105 ↗