journal article·2020-03

Experimental study on tensile properties of 3D printed flexible kirigami specimens

Jun Nakajima, Kazem Fayazbakhsh, Yoshinori Teshima

Publisher page

Abstract

Abstract Fused Filament Fabrication (FFF) is one of the most popular 3D printing processes that can be used to manufacture flexible parts. With the use of kirigami structures, the load-carrying capability and elongation of these parts can be significantly improved. In this work, we investigate the impact of stacking sequence, slit size, and thickness on the tensile properties of 3D printed flexible kirigami specimens. In addition, we demonstrate how the transition phenomenon and out-of-plane deformation can significantly improve percent elongation at their breaking point. Considering the deformed shape during testing, specimens with a combination of layers printed along and transverse to their length showed the highest tensile break strength and the percent break elongation (2.43 MPa and 183 %, respectively). It is also determined that the occurrence of the transition phenomenon depends on the specimen’s thickness, and was observed for the 1 mm and 1.5 mm thick samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Process–structure–properties in polymer additive manufacturing via material extrusion: a review10.1080/10408436.2018.1549977 ↗
2. Recent developments in fused deposition modeling-based 3D printing of polymers and their composites
3. FDM process parameters influence over the mechanical properties of polymer specimens: a review10.1016/j.polymertesting.2018.05.020 ↗
4. The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication
5. The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties10.1108/RPJ-06-2016-0090 ↗
6. Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method10.1016/j.jmapro.2018.09.025 ↗
7. Experimental analysis of high temperature PEEK materials on 3D printing test
8. An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments10.1108/RPJ-07-2014-0083 ↗
9. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties10.1177/0021998316646169 ↗
10. Fused deposition modelling parts tensile strength characterisation
11. 3-D printing and characterization of polymer composites with different reinforcements
12. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions10.1016/j.matdes.2014.02.038 ↗
13. Characterization and optimization of mechanical properties of abs parts manufactured by the fused deposition modelling process
14. Effects of layer thickness and binder saturation level parameters on 3d printing process10.1007/s00170-010-2821-1 ↗
15. An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study10.1016/j.ijmecsci.2016.11.032 ↗
16. Parametric appraisal of fused deposition modelling process using the grey taguchi method10.1243/09544054JEM1565 ↗
17. Evaluation of dimensional accuracy and material properties of the makerbot 3D desktop printer10.1108/RPJ-09-2013-0093 ↗
18. Anisotropic material properties of fused deposition modeling ABS10.1108/13552540210441166 ↗
19. 3D printing of flexible parts using EVA material
20. Extrusion-based additive manufacturing process for producing flexible parts10.1007/s40430-018-1068-x ↗
21. The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)10.1016/j.jmapro.2018.08.013 ↗
22. Initial rigid response and softening transition of highly stretchable kirigami sheet materials10.1038/srep24758 ↗
23. K. Okumura, M. Isobe and A. Takei, "Sheet material elasticity adjusting method, force sensor, and sheet material". Patent PCT/JP2017/015343, 14 April 2017.
24. ASTM D6693 · 2015