Powder-blown laser-based directed energy deposition of (14M) Ni-Mn-Ga magnetic shape memory alloy
Source abstract
Abstract
Ni-Mn-Ga-based magnetic shape memory (MSM) alloys are renowned for their large magnetic-field-induced strains, making them attractive for compact magnetically controlled actuators requiring high response frequencies and large reversible deformations. In this study, Ni-Mn-Ga alloy samples were deposited using powder-blown laser-based directed energy deposition (DED-LB), employing gas-atomised powder pre-alloyed with excess Mn. The samples were deposited following a systematic experimental design, varying the applied laser power and employing two melting strategies: unidirectional and bidirectional. The results demonstrate the feasibility of achieving high relative densities (>97.5 %) in multi-layered Ni-Mn-Ga samples through DED-LB. All as-deposited samples exhibited a consistent 0.7–0.9 at% Mn loss in comparison to the powder feedstock, thus showing that the Mn overdosing requirements for DED-LB differ from those in laser powder bed fusion. Both as-deposited and heat-treated samples exhibited seven-layered modulated (14 M) martensite structures at ambient temperature. In contrast, the heat-treated samples also exhibited fully reversible martensite transformation at around 66 ºC and a Curie temperature at around 94 ºC. Distinct microstructural characteristics were observed based on the melting strategy, with bidirectional melting promoting the formation of large columnar grains with a strong <100> texture approximately along the build direction. This study highlights the potential of DED-LB processes in manufacturing relatively large (mm to cm scale) functional Ni-Mn-Ga actuators and contributes to the ongoing efforts in laser additive manufacturing of functional materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Large magnetic-field-induced strains in Ni2MnGa single crystals10.1063/1.117637 ↗
2. Magnetically controlled shape memory effect in Ni2MnGa intermetallics10.1016/S1359-6462(96)00483-6 ↗
3. 6% magnetic-field-induced strain by twin-boundary motion in ferromagnetic Ni–Mn–Ga10.1063/1.1306635 ↗
4. Giant magnetic-field-induced strain in NiMnGa seven-layered martensitic phase10.1063/1.1458075 ↗
5. 12% magnetic field-induced strain in Ni-Mn-Ga-based non-modulated martensite10.1063/1.4775677 ↗
6. Ultrafast actuation of Ni-Mn-Ga micropillars by pulsed magnetic field10.1016/j.scriptamat.2018.12.009 ↗
7. Sensing strain with Ni-Mn-Ga10.1016/j.sna.2017.11.002 ↗
8. Magnetic shape memory micropump for submicroliter intracranial drug delivery in rats10.1115/1.4034576 ↗
9. Integratable magnetic shape memory micropump for high-pressure, precision microfluidic applications10.1007/s10404-018-2058-0 ↗
10. Modeling and design of a vibration energy harvester using the magnetic shape memory effect10.1088/0964-1726/24/9/095002 ↗
11. Efficiency of energy harvesting in Ni–Mn–Ga shape memory alloys10.1007/s40830-018-0158-z ↗
12. 4D printing of Ni–Mn–Ga magnetic shape memory alloys: a review10.1080/02670836.2022.2062655 ↗
13. Giant 5.8% magnetic-field-induced strain in additive manufactured Ni-Mn-Ga magnetic shape memory alloy
14. Twin boundary mobility in additive manufactured magnetic shape memory alloy 10M Ni-Mn-Ga10.1016/j.actamat.2022.118666 ↗
15. Laser powder bed fusion of Ni-Mn-Ga magnetic shape memory alloy
16. Characterization of as-built and heat-treated Ni-Mn-Ga magnetic shape memory alloy manufactured via laser powder bed fusion
17. Laser powder bed fusion of (14M) Ni-Mn-Ga magnetic shape memory alloy lattices
18. I. Gibson, D. Rosen, B. Stucker, Directed Energy Deposition, In: Additive Manufacturing Technologies – 3rd Edition, Springer, New York, NY, USA, (2021). https://doi.org/10.1007/978-3-030-56127-7.10.1007/978-3-030-56127-7_10 ↗
19. An overview of Direct Laser Deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics
20. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
21. Working distance passive stability in laser directed energy deposition additive manufacturing10.1016/j.matdes.2018.11.021 ↗
22. Properties of as-deposited and heat-treated Ni-Mn-Ga magnetic shape memory alloy processed by directed energy deposition10.1016/j.jallcom.2018.04.059 ↗
23. Direct laser deposition and homogenization of Ni-Co-Mn-Sn magnetocaloric material10.1017/S1431927618005275 ↗
24. Effect of homogenization on the microstructure and magnetic properties of direct laser-deposited magnetocaloric Ni43Co7Mn39Sn1110.1115/1.4046900 ↗
25. Microstructure and properties of Ni-Co-Mn-Al magnetic shape memory alloy prepared by direct laser deposition and heat treatment10.1016/j.optlastec.2021.107119 ↗
26. Influence of energy area densities on microstructure evolution and properties of laser direct energy deposited NI-Co-Mn-Al-Y magnetic shape memory alloy
27. Empirical mapping of Ni–Mn–Ga properties with composition and valence electron concentration10.1063/1.1453943 ↗
28. Identification of novel compositions of ferromagnetic shape-memory alloys using composition spreads10.1038/nmat829 ↗
29. Composition and temperature dependence of the crystal structure of Ni–Mn–Ga alloys10.1063/1.1748860 ↗
30. Compositional dependence of structure, magnetization and magnetic anisotropy in Ni–Mn–Ga magnetic shape memory alloys10.1016/j.jmmm.2003.12.819 ↗
31. Chemical ordering in Ni-Mn-Ga Heusler alloys10.1016/S1359-6462(99)00080-9 ↗
32. The influence of atomic order on the magnetic and structural properties of the ferromagnetic shape memory compound Ni2MnGa10.1088/0953-8984/15/22/317 ↗
33. Correlation between atomic order and the characteristics of the structural and magnetic transformations in Ni–Mn–Ga shape memory alloys10.1016/j.actamat.2007.03.001 ↗
34. Effect of atomic ordering on the phase transformations in Ni–Mn–Ga shape memory alloys10.1016/j.actamat.2006.10.025 ↗
35. Effects of surface damage on twinning stress and the stability of twin microstructures of magnetic shape memory alloys10.1016/j.actamat.2011.01.035 ↗
36. L, Effect of crystal quality on twinning stress in Ni–Mn–Ga magnetic shape memory alloys10.1016/j.jmrt.2021.07.081 ↗
37. Giant magnetic-field-induced strains in polycrystalline Ni–Mn–Ga foams10.1038/nmat2527 ↗
38. A 1% magnetostrain in polycrystalline 5m Ni–Mn–Ga10.1016/j.actamat.2008.09.017 ↗
39. V. Laitinen, Laser Powder Bed Fusion for the Manufacture of Ni-Mn-Ga Magnetic Shape Memory Alloy Actuators. Lappeenranta, Finland: Lappeenranta-Lahti Univ.Technology LUT, 2021. ISBN 978-952-335-745-7 (PDF). Available at: https://urn.fi/URN:ISBN:978-952-335-745-7.
40. Influence of grain size distribution on the Hall–Petch relationship of welded structural steel10.1016/j.msea.2013.10.094 ↗
41. Fabrication of thin walls with and without close loop control as a function of scan strategy via direct energy deposition10.1007/s40516-022-00164-8 ↗
42. Extended investigation of intermartensitic transitions in Ni-Mn-Ga magnetic shape memory alloys: a detailed phase diagram determination10.1063/1.4831667 ↗
43. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
44. Evolution of microstructure and crystallographic texture of Ni-Mn-Ga melt-spun ribbons exhibiting 1.15% magnetic field-induced strain10.1016/j.actamat.2021.117237 ↗
45. Compressive deformation of polycrystalline Ni-Mn-Ga alloys near chemical ordering transition temperature10.1016/j.matdes.2018.01.048 ↗
46. Temperature dependence and temperature limits of magnetic shape memory effect10.1063/1.1626800 ↗