Direct printing of conductive hydrogels using two-photon polymerization
Source abstract
Abstract
Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) based conductive hydrogels have been extensively used for bioelectronics and tissue engineering applications owing to their high electrical conductivity and ability to interface with soft biological tissues. However, the fabrication of PEDOT:PSS-based hydrogels has mostly relied on conventional fabrication techniques such as casting and transfer printing, which limits the feature size to micro- or mesoscale. To address these limitations, this study offers a novel PEDOT:PSS-based hydrogel material that can be printed directly to nano/microscale structures using the Two-Photon Polymerization (TPP) technique. The TPP-printability of the newly developed hydrogel was analyzed, and its printing window was characterized. The prepared hydrogel exhibits enhanced radial swelling, electrical properties, and biocompatibility compared to the pristine PEDOT:PSS. To validate the micro-manufacturing feasibility of hydrogel, several microstructures were fabricated using the TPP process. The fabricated microstructures demonstrate many properties, including electrical conductivity, biocompatibility, high resolution, and structural stability. The direct printing of highly conductive PEDOT:PSS hydrogel micro-devices overcomes the limitations of traditional conductive hydrogel manufacturing methods. It opens up new possibilities for applications in micro-energy storage devices, flexible micro/nanoelectromechanical systems (MEMS), and flexible biomedical micro-devices. The combination of high-resolution direct printing and unique hydrogel properties offers promising opportunities in these fields.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Neuroscience and Neural Engineering · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Effect of PEDOT:PSS in tissue engineering composite scaffold on improvement and maintenance of endothelial cell function10.1007/s12038-018-9748-3 ↗
2. Highly flexible and conductive glycerol-doped PEDOT:PSS films prepared under an electric field10.1007/s11664-018-6292-8 ↗
3. Pure PEDOT:PSS hydrogels
4. Highly conductive PEDOT:PSS treated by sodium dodecyl sulfate for stretchable fabric heaters10.1039/C6RA24749K ↗
5. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/polyethylene oxide electrodes with improved electrical and electrochemical properties for soft microactuators and microsensors10.1002/aelm.201800948 ↗
6. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
7. Highly conductive PEDOT:PSS nanofibrils induced by solution-processed crystallization10.1002/adma.201304611 ↗
8. Application of conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) polymers in potential biomedical engineering10.1007/s40005-020-00485-w ↗
9. Development and translation of PEDOT:PSS microelectrodes for intraoperative monitoring10.1002/adfm.201700232 ↗
10. Highly porous scaffolds of PEDOT:PSS for bone tissue engineering10.1016/j.actbio.2017.08.045 ↗
11. Facile fabrication of flexible glutamate biosensor using direct writing of platinum nanoparticle-based nanocomposite ink10.1016/j.bios.2019.01.051 ↗
12. A weldless approach for thermocouple fabrication through direct ink writing technique10.1109/JSEN.2020.3018747 ↗
13. 3D printing of conducting polymers10.1038/s41467-020-15316-7 ↗
14. 3D printing of large-scale and highly porous biodegradable tissue engineering scaffolds from poly(trimethylene-carbonate) using two-photon-polymerization10.1088/1758-5090/abb539 ↗
15. Gradient light video projection-based stereolithography for continuous production of solid objects10.1016/j.jmapro.2021.02.048 ↗
16. Continuous printing of bone-inspired hierarchical porous objects using video projection-based stereolithography10.1016/j.jmapro.2023.10.032 ↗
17. Fast and simple fabrication of multimaterial hierarchical surfaces using acoustic assembly photopolymerization (AAP)10.1002/admi.202201981 ↗
18. An electrochemical gelation method for patterning conductive PEDOT:PSS hydrogels10.1002/adma.201902869 ↗
19. Development of 3D printable conductive hydrogel with crystallized PEDOT:PSS for neural tissue engineering10.1016/j.msec.2019.02.008 ↗
20. Mechanically robust, photopatternable conductive hydrogel composites10.1016/j.reactfunctpolym.2017.09.006 ↗
21. 3D printed microstructures for flexible electronic devices10.1088/1361-6528/ab2d5d ↗
22. Fundamentals of light-cell-polymer interactions in photo-cross-linking based bioprinting10.1063/5.0022693 ↗
23. Cucurbit[7]uril-carbazole two-photon photoinitiators for the fabrication of biocompatible three-dimensional hydrogel scaffolds by laser direct writing in aqueous solutions10.1021/acsami.8b15011 ↗
24. Total iron measurement in human serum with a smartphone
25. Acoustic field-assisted two-photon polymerization process10.1115/1.4050759 ↗
26. Nanoscale 3D printing of hydrogels for cellular tissue engineering10.1039/C8TB00301G ↗
27. Two-photon polymerization of anisotropic composites using acoustic streaming
28. Acoustic streaming-assisted two-photon polymerization process for the production of multimaterial microstructures
29. Photo-sensitive hydrogels for three- dimensional laser microfabrication in the presence of whole organisms10.1117/1.JBO.17.10.105008 ↗
30. Hierarchical nano/micro-structured surfaces with high surface area/volume ratios10.1115/1.4049850 ↗
31. Precise assembly and joining of silver nanowires in three dimensions for highly conductive composite structures10.1088/2631-7990/ab17f7 ↗
32. Controlled drug delivery from 3D printed two-photon polymerized poly(ethylene glycol) dimethacrylate devices10.1016/j.ijpharm.2018.09.065 ↗
33. Near-infrared light-sensitive polyvinyl alcohol hydrogel photoresist for spatiotemporal control of cell-instructive 3D microenvironments
34. Laser fabrication of three-dimensional CAD scaffolds from photosensitive gelatin for applications in tissue engineering10.1021/bm1015305 ↗
35. Nanostructured electrically conductive hydrogels obtained: via ultrafast laser processing and self-assembly10.1039/C9NR01230C ↗
36. Effect of the resin viscosity on the writing properties of two-photon polymerization10.1364/OME.9.002601 ↗
37. Light-driven micron-scale 3D hydrogel actuator produced by two-photon polymerization microfabrication10.1016/j.snb.2019.127345 ↗
38. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid)–polymer composites as functional cathode binders for high power LiFePO 4 batteries10.1007/s00396-018-04468-0 ↗
39. Poly(ethylene oxide) / PEDOT:PSS blends: An efficient route to highly conductive thermoplastic materials for melt-state extrusion processing
40. Efficient transport networks in a dual electron/lithium-conducting polymeric composite for electrochemical applications10.1021/acsami.8b01519 ↗
41. Stretchable and conductive polymer films prepared by solution blending10.1021/acsami.5b04492 ↗
42. Chemical cross-linking of conducting poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) using poly(ethylene oxide) (PEO)10.1016/j.polymer.2013.09.046 ↗
43. Additive manufacturing of photosensitive hydrogels for tissue engineering applications10.1515/bnm-2014-0008 ↗
44. Thiol-ene photo-click collagen-PEG hydrogels: Impact of water-soluble photoinitiators on cell viability, gelation kinetics and rheological properties10.3390/polym9060226 ↗
45. Microfabrication of pH-responsive 3D hydrogel structures via two-photon polymerization of high-molecular-weight poly(ethylene glycol) diacrylates10.1016/j.snb.2018.09.079 ↗
46. Kimtan T., Thupmongkol J., Williams J.C., Thongpang S. Printable and transparent micro-electrocorticography (μECoG) for optogenetic applications. 2014 36th Annu Int Conf IEEE Eng Med Biol Soc EMBC 2014 2014:482–5. 〈https://doi.org/10.1109/EMBC.2014.6943633〉.10.1109/EMBC.2014.6943633 ↗
47. Cellular adhesion and proliferation on poly(3,4-ethylenedioxythiophene): benefits in the electroactivity of the conducting polymer10.1016/j.eurpolymj.2007.03.050 ↗
48. Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle10.1002/app.49921 ↗
49. Effect of cross-linking spacers on biocompatibility of chitosan-spacer- poly(ethylene oxide) hydrogel10.1007/s13233-011-0606-5 ↗
50. Hollinger J.O., Ph D. Scaffold for Bone Tissue Engineering 2003;9.10.1201/9780203495094 ↗
51. Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs10.1088/1748-605X/ab954e ↗
52. Two-photon lithography for three-dimensional fabrication in micro/nanoscale regime: a comprehensive review10.1016/j.optlastec.2021.107180 ↗
53. Development of flexible and wearable temperature sensors based on PEDOT:PSS10.1109/TED.2019.2914301 ↗
54. Generation of human induced pluripotent stem cells by simple transient transfection of plasmid DNA encoding reprogramming factors10.1186/1471-213X-10-81 ↗
55. Polymerization kinetics in three-dimensional direct laser writing10.1002/adma.201402366 ↗
56. 3D printing for polymer/particle-based processing: a review10.1016/j.compositesb.2021.109102 ↗
57. Conducting scaffolds for liver tissue engineering10.1002/jbm.a.35080 ↗
58. Direct laser writing of synthetic poly(amino acid) hydrogels and poly(ethylene glycol) diacrylates by two-photon polymerization10.1016/j.msec.2014.07.027 ↗
59. Performance comparison of acrylic and thiol-acrylic resins in two-photon polymerization10.1364/OE.24.013687 ↗
60. Asymmetric microstructure of hydrogel: Two-photon microfabrication and stimuli-responsive behavior10.1039/c1sm06137b ↗
61. High sensitivity flexible paper temperature sensor and body-attachable patch for thermometers10.1016/j.sna.2020.112205 ↗
62. Enhanced ion conductivity in conducting polymer binder for high-performance silicon anodes in advanced lithium-ion batteries10.1002/aenm.201702314 ↗
63. Three-dimensional printing of highly conducting PEDOT: PSS-based polymers10.1115/1.4055850 ↗
64. Conductive “smart” hybrid hydrogels with PNIPAM and nanostructured conductive polymers10.1002/adfm.201404247 ↗
65. Highly conductive, stretchable, and transparent PEDOT:PSS electrodes fabricated with triblock copolymer additives and acid treatment10.1021/acsami.8b07287 ↗
66. Electroconductive gelatin methacryloyl-PEDOT:PSS composite hydrogels: design, synthesis, and properties
67. Flexible neural interfaces based on 3D PEDOT:PSS micropillar arrays
68. From simple to architecturally complex hydrogel scaffolds for cell and tissue engineering applications: opportunities presented by two-photon polymerization10.1002/adhm.201901217 ↗
69. Development of free-standing polymer nanosheets for advanced medical and health-care applications10.1038/pj.2016.38 ↗